'62-'65 Mopars, based on early 1960's Mopar Logo

NOTE: 2014 entries begin with 2014 at the start of the entry.
Newest entries are at the bottom of each category.



Suggestions! Buying these using the Amazon link below helps support this Web site! THANKS!


How to Super Tune DVD graphic
How to Super Tune!
Performance Engine Building
and Carburetor Tuning
This DVD is great for the first time engine builder/novice but is geared towards the person that knows how to install a crank, rods, pistons, and knows how to torque down a cylinder head correctly, but wants to take their engine building to the next level....
Cost is $29.95 plus shipping. Email Wayne Smothers at afxplymouth (at) sbcglobal (dot) net to buy the DVD. Use 62-65 DVD in the subject line.



Did we help your restoration? Support the 1962 to 1965 Web site with a donation.



The 1962 to 1965 Mopar Swap Meet -- 2014
VEHICLES FOR SALE PARTS FOR SALE VEHICLES WANTED PARTS WANTED


How to Post an Ad.    Newest ads are at the bottom of each category!     How to Post an Ad.

Did we help your restoration? Support the 1962 to 1965 Web site with a donation.


SCAM ALERT! — If the deal sounds fishy, it probably is!
Beware! View how to protect yourself at the Swap Meet Scam Warning!


Did we help your restoration? Support the 1962 to 1965 Web site with a donation.


How to Post an Ad.    Newest ads are at the bottom of each category!      How to Post an Ad on the Swap Meet.

For Sale

Vehicles For Sale

1962 Vehicles For Sale

For sale: 1962 Plymouth Fury 4 door with 69xxx miles in excellent condition. Has the interior redone with non original pattern vinyl with excellent original door panels. Car has original poly 318 and the typical transmission leaks. Asking $7500 or best offer. Car is located in Illinois. Car drives excellent. Reason for selling: I have too many vehicles and need to downsize. Contact Dick at shoupr@yahoo.com (10-4-2013)

FOR SALE: 1962 Dart 440 convertible project. Car is a roller, most metal work is done. Solid floors, trunk, rockers. Engine is a 318 that has been rebuilt. Bumpers have already been rechromed. Car is white,red interior and black top. Call and I will go over car in detail and send pics. Can possibly deliver. Car is in southern GA. $5500.00 Phone Stan at area code 478 and 279 2307 (October 4, 2013) SOLD!

1962 Plymouth two door post for sale. Solid lot of new parts on the car plus come with the car. All max wedge parts. Call for more information if interested. Car is in North Carolina . 704 747.1789 Neal

2014 1962 Plymouth Fury for sale. 2 door hardtop 413 Street Wedge Push button 727 torqueflite 8 3/4 rearend with 276 gears new tires and battery $15,000.00 Located in Brighton,Tenn. 38011 for more information are Questions call (March 31, 2014) SOLD

Newest ads are at the bottom of each category!

1963 Vehicles For Sale

1963 Plymouth Sport Fury for sale. Roller! No engine or transmission. Originally a Golden Commando 383, 727. Solid frame rails,trunk floor and exts. Has all the original interior, Black and copper buckets, nice console! Original am radio, Glass is all good, along with most of the stainless trim. Missing the trunk piece. Needs drs. floor pan, Hood, Decklid, Grill and front bumper and brackets. Drs.door, the cowl, and rockers, frt.fenders are all solid! Car is sold on a Bill Of Sale (no title). Get new title through Broadway Title Service! Too many projects,and not enough time! The car is located in the St.Louis, Mo. area. I have pictures I can email you if interested! Asking price is $2700.00 without the good sheetmetal and $3200.00 with it. classic.moparnospamlive.com -- replace nospam with @ (1/1/2012)

1963 Plymouth Fury Convertible for sale. Viper Red exterior with red and white interior. 440 ci with a 727 Push Button automatic, 2.76 gears for great gas mileage. Ground up restoration several years ago, including new interior. No expense was spared in restoring this fine convertible. Front and rear bumpers and bumperettes rechromed, new repo tail light bezels, all the stainless has been polished, and many nos parts installed. Awesome engine compartment detailed with chrome and polished accessories. This is one beautiful convertible. The car is located in Conneaut Lake, Pa. Contact Tom by phone 814 382 9066 or email: theburbs AT zoominternet.net if you have any questions. Contact me for pictures. Price $75,000.00 No Trades please! (January 1, 2012)

1963 Plymouth Sport Fury for sale. White 2 door, Red interior. started to take apart to restore. Have ALL parts, this was a driven vehicle. My brother purchased from original owner in California. 63,000 mile, 361 commando with typewriter shift. Car has rust in rear quarters behind wheel wells, and one rust spot on cowl. Floor solid, trunk sound. Have factory service manuals and fender tags. I have owned this for 12 years. Life has made me change my priorities, my loss is someone's gain. I am in Kodiak Alaska, probably $1500.00 to ship to Seattle Washington, so I will talk a reasonable price to a serious buyer. 907-539-7072 cell (please note time zones, 4 hours behind east coast.) (January 8, 2012)

For Sale 1963 Plymouth Belvedere 4 Door. This was a Texas Generals estate car. Great for restoration, everything there: 318 Mini Hemi Poly motor, 727 Trans, 8 3/4 rear end. Very very solid car and clean on the underside too. Contact me for pictures. $3800.00 plus shipping. Gary in Titusville Florida. lawride AT bellsouth.net (January 23, 2012)

1963 Plymouth Valiant1963 Plymouth Valiant convertible for sale. $5500, new top and rubber, slant 6, automatic, and power steering. White top, red body, red and white interior; interior is in good shape a little faded in rear window area.. It has 58K miles, came from Arizona. Not show quality, could use some paint repair for this and rear passenger floor pan, old top leaked and ran down that side (rusted a hole). The top is manual. The car is located south of Papillion, Ne. Call Verle at or text 402 598 1466 -- Asking what I have in it. (May 26, 2012)

Two (2) 1963 Dodge Polara parts cars for sale. (1) Polara 500 (1) Polara 440. cars not running. $750.00 each or both for 1000.00. Located in Oregon OH. 419-345-6985 or Email npdk9 AT toast.net for more info or pics. (July 12, 2012)


1963 Plymouth Fury Convertible for sale. Viper Red with white top, red and white interior. No rust. Originally had a 361 ci. Now has a 1972 440 ci, 727 Automatic (push button ). Ground up restoration, completed a number of years ago. (Still looks new!) Everything is in excellent condition as can be seen in the pictures. [ed. note: online soon or ask seller]. The engine compartment is spotless as is the entire car. You have to see this car in person to really appreciate the workmanship that has gone into it. Located in Conneaut Lake, Penna. (96 miles north of Pittsburgh). $56,000.00 Call Tom at 814-382-9066 for more information. (March 10, 2013)

2014 - For Sale: 1963 Plymouth Valiant convertible. 170 slant six, push button automatic. The car runs good and is legally driven regular. The car needs to be restored, paint, top etc. It has new brake hubs, wheel cylinders, shoes, tune up. Legally owned it for 14 years, it is a driver car and can be driven home. Clear title with matching vin numbers. $4,500 cash, firm. Not interested in doing any trading at all, selling it straight out. Buyer picks it up in person and pays for it in person, no PayPal, personal or other checks, none. Located outside of Bluefield, VA area. Contact me at Yeoman58@msn.com (July 7, 2014)

2014 - for sale 1963 Dodge 330 Wagon. Was a 6 cyl, 3 speed column shift car. This was to be a resto mod street/strip car. Now there is no engine, trans or rear (I can put an 8 3/4 in to make it a roller or see options below). Seats are gone, but have all the door panels and are in great shape as is rest of interior parts. There is a roll cage welded in but not a big deal to remove if not needed. All glass good except for windshield. Have all new glass gaskets and weather stripping. All moldings are good shape. All original dash and gauge cluster in good shape. Front grill and grill trim in perfect shape. All new floor pans all rust work complete. Car is straight and blocked out. Tailgate still needs a little work. Front disk Wilwood brake conversion. New steering column with tilt. No fuel tank but have a new fuel cell. All the hard work is done and ready to go back together. I am sure I am forgetting a lot but hopefully you get the drift. Clean title - $6,000.00 Car is located in Philadelphia, PA. Contact Paul at six 1 zero - six 5 6 - three 8 3 0. or email killswitch692@gmail.com (July 20, 2014)

1963 Dodge 330 B-Body for sale. It is a perfect Father/Son Project. I have had this car since 1997 and drove it regularly. I tore it down to get it painted and four flaked-out painters later, it still is not done. Basically this car has served its purpose for me and I would rather see someone else enjoy it, rather than watch it rot in my back yard.
What you are getting is a complete car that is currently disassembled. you are also getting a trove of aftermarket pieces that I have collected for this car over the years. some of these parts are a Weiand High Rise intake manifold, two Sears under dash A/C units with the associated pumps and pulleys. a power steering knuckle and pump, an extra set of heads, the original intake manifold with the stock Stromberg Carb and all four hubcaps.


Summary:
1963 Dodge B-Body 330 Polara
Engine: 318 Polyspheric
Trans: 727 TorqueFlite push button
Rear End: Original replaced with a limited slip out of a 68 Dart R/T
Glass: All original and intact
Title: Clear Oregon Title
I am offering a fair price for what you are getting. If you want to come take a look, send an email for directions. $2000 I am Near Austin, TX. View photos and contact e-mail address on this web page (Auguat 20, 2014)

Newest ads are at the bottom of each category!

1964 Vehicles For Sale

1964 Dart for sale. It has a 1966 318 Poly block modified to fit 360 J heads, forged crank, balanced and blueprinted, J and E custom made pistons (333 cu. in.), Eagle rods, Mopar performance 557 lift 292 duration cam, Crane-Gold race roller rockers 1.5 ratio, 360 J heads ported and polished, Weiand tunnel ram intake w/ 2 600 Holleys, fluid damper, 904 tranny w/ low first and second, Cheetah manual reverse valve body, high performance clutch and band pak, Moser axles, Richmond 4.88 gears, sub-frame connectors, fully tubbed, drag shocks and Weld racing wheels. We also changed out the front end with a 1972 Dart to beef it up for the V8, and for the disc brakes. Then the rear end is out of a 1968 Cuda. The Dart is not a show car but it is pretty nice. The Mopar also has custom-made upholstery. Still needs a little T.L.C. The Dart was not built for strictly racing because around here (in Kingman, Az. about a half hour east of Laughlin) the car is streetable. If I were going to race it I would probably switch out the manifold and carbs. I do have over $20,000 in the Dodge but have had some medical bills and just need the money, so I will sacrifice the Dodge for $8,500. See the 1964 Dart photos and the phone number to contact the owner.

A nice 1964 Dodge Polara for sale. It has a rebuilt 383 P/B with 2x4 600 cfm Edelbrock new carbs. The interior is new, front tires new, trans 727 new rebuilt exhaust with Flowmasters new from heads to rear with 2.5 pipe. New rubber on front and rear and side windows with new door rubber. New front disc brakes and new rear wheel cyl. It is a new paint job, but not a good one. Asking $10,000 for it. Get contact info and see pictures here. (February 20, 2012)

1964 Plymouth Belvedere for sale. 2 door hardtop. 360 c.i., stock heads w/small stem, Offy manifold, Holley 650 double pumper, Comp cam xe284H, cast crank offset ground for Manley rods with small journal, Hooker super comp 5115, TCI converter, 727 transmission with B and M shift kit, rebuilt Just Suspension front end, Wildwood front disc brakes, drums rear, 8.3/4 open rear with 3:23 gears, Cooper 255-70-15, General 225-75-15, all on Keystone Classics. I have lower front fender and upper cowl repair panel, new engine compartment and under dash harnesses, mostly original paint, needs body work: lower quarters, front lower fenders, rear wheel wells. I owned this Plymouth since 1987. Asking $5000 or best offer. Car is in New Jersey. Contact James at sleepr64 (at) yahoo (dot) com or phone #862-703-0565. (May 26, 2012)

1964 Plymouth 4 door sedan with a 6 cylinder standard shift parts car. $500 for the car. Rust free Texas car, great for parts. I will part out but rather sell complete. Contact Mark at 325-669-4941 or fastmark1970 AT yahoo.com. In the Abilene and San Angelo TX area (June 5, 2012) (June 5, 2012)

1964 Plymouth Fury Convertible
1964 Plymouth Sport Fury Convertible for sale. Black with white top, red and white interior. No rust ever. Factory undercoat intact. Original HP 383, A833 four speed, 3.23 sure grip. Only modifications, disk brakes and Pertronic ignition. It is a cruiser that has never been raced or beat on. Not many 1964 Sport Fury Convertibles like this #2 car left anywhere. Located in Gulfport, MS. Priced at $35,000. Call Jon at 228-324-6191 or 228-223-3528 Anytime. E-mail DeaconJon1941 AT aol.com (June 30, 2012)

For sale: 1964 Dodge Polara 500, two door hardtop, buckets, console. No engine or transmission. Shows 87,220 miles on odometer. Needs complete restoration or make good driver or drag car. Very solid body, floors, trunk, frame. Was small block with automatic trans. $3,000.00. Located southwest side of Chicago, IL. Contact Dennis - 708-878-9795, e-mail NortonMC AT aol.com (September 9, 2012)

For sale: 1964 Dodge 440 project car. Blasted, primed and on a rotisserie. All parts included. All in great shape except quarters. Car is in Green Bay WI. Contact me at 920-866-2811 or joe AT protecautobody.com (September 9, 2012)

For sale: Rare 1964 Dodge Custom 880 Wagon. Classic, rare 1964 Dodge Wagon, 4 door, hard top, excellent condition, 2nd owner, less than 60,000 original miles. Desert vehicle, no rust; 383 Engine/Full power. Will consider cash offers or trade for travel trailer or HD. No junk. Will send photo on request. In Ridgecrest, CA. Call or write for details: 559-618-2902; dodgewagon64 AT yahoo.com (September 9, 2012)

1964 Dodge Polara 500 original 426 Max Wedge for sale. Of the 153 1964 Max Wedge Dodge’s built, only 5 were Polara 500 2 door hardtops. Of these, this vehicle is the only one known to still exist as per Galen Govier. This car is a factory drag racer and made famous in the Jan and Dean song 'Little Old Lady From Pasadena'. The Polara 500 was the top of the line Dodge in 1964 and this vehicle is well equipped with bucket seats, console, am-fm with reverb and clock. The vehicle also features the extremely rare TRI-Y exhaust and is the only factory Max Wedge known to have them installed. This car has been looked at and authenticated by Galen Govier. It has been awarded Senior status by the AACA, won the Bethlehem star at the Lehigh Valley concours and was featured in Mopar Action magazine. Photos are available by contacting me at hemial @ hotmail.com or calling me at 908 361 0013. Showing only 16,000 original miles this vehicle is available for $174,900.00 or partial Mopar trade. (February 12, 2013)

1964 Plymouth Belvedere 2 door hardtop for sale. It is setup for a big block Mopar engine (engine plate included). The spring perches are relocated to the framerails. The car has been mini tubbed. There is a 8 point cage installed. All of the wiring is still in the car. The car has all steel body panels with the '64 Hemi scoop on the hood. All of the trim is still on the car and not perfect but in good shape. I have a transferable registration from New York State. The car has rust issues in the frame rails, the front suspension around the upper control arms are rusty. The torsion bar crossmember is broken on the left side The car will need the framerails replaced or repaired. There is no rear suspension, no engine or transmission, or disc brake spindles included with the car. I am asking $2000.00 or best offer. Call me after 4:00pm (813) three five 5- 7 zero seven 8. Location: Brooksville, Fl April 8, 2013

Newest ads are at the bottom of each category!

1965 Vehicles For Sale

1965 Dodge Coronet 500 for sale. 361 w/Carter 4bbl, 727 auto. Runs and drives. Bucket seats, console, solid body. Great restoration project. Original light gold w/light gold interior now black on black. Needs complete restoration. Included is all trim, extra bumpers, extra trim parts, extra dash and parts, and 1969 383 HP engine. Drivetrain has never been apart. Unsure of mileage but roughly 110,000 miles. I have too many projects and I want to see this one go to a good home. Contact Rick at phone (336)362-1292 or email Four40dodge AT aol.com Car is just outside of Greensboro, NC. (December 3, 2011 - Relisted January 1, 2012)

For sale is my wife’s 1965 Dodge Coronet 500 The car is an original South Carolina car which was parked since the mid 1970’s when I purchased it around 2004 in Gaffney SC. It is a factory air car with the poly 318 engine in it; the original engine was shot which was the reason the car was parked. I installed a 1965 318 from a Fury 1 I had which is a 43k mile original one owner engine that runs like new with plenty of power; it has the original transmission and 3 core radiator with shroud and the car will idle in traffic all day in the middle of summer and never climb up past cool on the gauge; the car has a all new Legendary interior including carpet and headliner; still need to get the visors redone and has a single stage driver paint job in the original color, ee1 metallic blue which was the first repaint and a really sharp color all the factory panels in place and as rust-free car as I have seen; no rust period. It has Mopar 14 inch Ralleye wheels on it with almost new Michelin tires, all new brakes, shocks, etc. and I rolled Herculiner bed liner to the interior floor pans and firewall along with Hushmat and sprayed inside doors and 1/4s with undercoating for sound deadening and insulation. I replaced all weatherstripping, car is quiet and a pleasure to drive. I have completely redone this car from top to bottom. The bottom of the car was never undercoated from the factory so you can see how clean and sweet the bottom is; it’s blue with some South Carolina red dirt still under there, only minor touches needed to be a top end car. Needs a new heat a/c switch, it stays on heat, I was gonna get switch rebuilt but have not got around to it; also speedometer needle jumps around which just needs graphite lube in cable; the factory radio speaker is shot; the bumpers are painted with Eastwood’s liquid chrome which looks good but would need to be chromed to be correct; the exhaust is in need of a redo with some flexpipe and mismatched mufflers on it: driveable but needs really to be replaced. The reason for selling is I have a rare Charger that needs restored and I need to get some cash together. I don’t want to get rid of it as this body style has been a favorite of mine since childhood. I have a Fury that I am the second owner of and I can’t bring myself to sell it, besides the wife has only put 200 miles on the car the last 2 summers, she would rather drive her new 300, woman! And she likes the hemi orange Charger. This Coronet is a real sweet car; the a/c worked till I pulled it apart for resto and lost the freon; it needs a charge and it will work once switch is rebuilt. All the major stuff done just needs a few of the easy minor touches done and you will have a excellent 1965 Dodge Coronet 500 in ee1 blue with factory air -- don’t get much better than that. This would be a perfect car for the mechanically limited as it is in cruise night shape now; it gets thumbs up every time we take her out, and you could tinker with it while taking it to cruise ins and have the satisfaction that you did some of the work to it as not every one has the ability and shop to redo a classic Mopar from start to finish 716-706-8714 Joe call with any questions you may have and I can email pics on request. Car is located just south of Buffalo NY and I would not hesitate to take a cross country trip in this car. Asking $10,500.00 which is close to what I have in the car. We can store the car till spring if needed as we just put her up for winter hibernation. (December 13, 2011, Relisted January 1, 2012)

1965 Plymouth Satellite
For sale: 1965 383 Plymouth Satellite. California car. Solid body; needs interior. Has new brakes drums and master and new carb. Proceeds go to the Hub Society we are taking 7 students to Indy for the 500 in May and this car needs to go. $5900 clean title ready to go. James Long (530)575-1616 (May 8, 2012)

1965 Plymouth Belvedere 4 door sedan parts car with a 318 auto and the column. $500 for the car. Rust free Texas car, great for parts. I will part out but rather sell complete. Contact Mark at 325-669-4941 or fastmark1970 AT yahoo.com. In the Abilene and San Angelo TX area (June 5, 2012)

1965 Plymouth Satellite for sale. In rough shape as far as rust is concerned. The car is a complete car. It has a running 361 and a working auto trans. I will sell the car as a complete unit for $3500 or best offer. The car is a registered black plate California car. All the interior is present including console. Contact me at 8055508034. Car is in San Luis Obispo California. I will also part this car out.

1965 Plymouth Belvedere Satellite convertible project for sale. Sold with bill of sale only. Needs floor pans. Condition of 383 motor and 727 trans unknown. Has some trim removed and is in trunk with console. Missing door interior panels, has later oem shifter on floor and console. Asking $2,750 -- Located in Emporia Kansas. 620 342--2080 or email rumba AT kans.com (March 26, 2013)

1965 Chrysler New Yorker, 2 door for sale. The car is complete. She has been sitting around my garage waiting for me to restore her since 1989, but, sadly, that will now never happen. The car has a lot of rust, but it is not a basket case she would likely be rated as what used to be called a class 4 car. The totally-original 413 engine ran VERY fine when parked, and everything on the car worked, even cold air. The interior is original; the awful paint job is not. The transmission was rebuilt 1000 miles before she was parked. Unfortunately, a busy life, and Home Owners Association regulations, kept me from tending to her, so who knows which of her items will or will not work any more. I am searching for a home for her with someone who will put her to good use. I plan on accepting the best serious offer within 30 days of the commencement of advertising as I need to lighten my load rather quickly. Removing and transporting her would be your responsibility, but, again, it would need to be performed fairly quickly. Health issues prevent me from assisting much.
I can be reached at 703 763-8788, but my phone is programmed not to answer unknown callers. You will need to leave a message, after which I will return your call (and I will also program my phone to recognize your phone). Far more preferably, you can email me at: jbrameyer AT ultra-tech.com, but keep in mind that the junk mail detector may trap your email, so, if you do not get a replying email, kindly try again with different wording. The car is located in a home garage in Springfield, Virginia, a suburb of Washington D.C., roughly 5 minutes from Interstate-95 and 9 minutes from the I-495 beltway.
(March 26, 2013)

1965 Dodge Coronet 500 2 door for sale. Take a look at photos of this very cool car. It has a ton of potential. The photos tell the story better than I ever could so take a look and at the link above. The photos have an old date but those are the correct photos for this car.
The car has the following options: Power steering, Power Brakes, 318 v-8, full console that seems to have had a tach, floor shift auto, reclining bucket seats, factory ac, headrests, red inside and out, top level '500' trim inside and out.
The car is very solid and very complete overall. It is missing the engine and trans but are ya really gonna put a 318 back in it? It is begging for a Max Wedge or Hemi. Or maybe a 440 6-pak. Oh, what about a late model 3G hemi like the 6.1 from an SRT model. Okay Okay I will quit day dreaming. This is what I wanted to do with this car but I just cannot. I have too many projects going on at once and I seriously need to thin the herd. CLEAN FLORIDA TITLE
So there it is. Let me know if you have any questions. Alex 904 - 703 - 0131 in Jacksonville FL (April 8, 2013)

1965 Dodge Monacos for sale.

2 of them located in Northern New York, Heuvelton near Canadain border.These cars are in good shape, both run and drive and are always stored inside in a heated garage; both 2 door hardtop; both 383 automatics on the floor; 5 passenger cars, console tach and bucket seats front and rear. They are in good shape and they are lots of parts that go with them as I have owned these cars since 1982 and 1991. They need a good home and someone to care for them. I am open for offers. I can can send more photos and more info. Please Contact at dougdaniel50 at yahoodotcom or call 3153446457 est (June 28, 2013)

1965 Dodge Polara for sale. 440/727 Edelbrock carb., Lowered 4 inches with blocks and adjusted torsion bars; All new suspension bushings; New brakes, drum all around; Needs exhaust, front bumper and grille; Shaved door handles; Two inch crack in windshield, all other glass good; Wiring harness has never been touched, everything works; Runs open manifolds due to engine swap; Runs and drives. Contact daniel lewis 812 841 6140 or redfredlewis @ yahoo.com $4500 obo Located in Brazil Indiana (July 21, 2013)

FOR SALE: 1965 Plymouth Satellite , Nevada car that was brought out to MN a couple months ago. Runs and drives, 318 poly engine, console shift automatic, black bucket seat interior, Centerline wheels, power steering, clean MN title, frame rails are all solid, built in Los Angeles, electronic ignition, trunk and lower rear quarters need some work, floor pan has a few small patches. $5,400. Zumbrota,MN Alan 507-732-4363/510-387-9467cell. (November 13, 2013)

FOR SALE: 1965 Dodge Dart 383 project car. New paint (off white and green), new interior (grey) and a 383 Chrysler big block. It is basically 90% finished. Needs minor parts to bring to running condition (Drive shaft, radiator, spark plug wires, distributor and transmission) Over 5K invested. Make me an offer (Please no low ball, Serious inquiries only please.) http://inlandempire.craigslist.org/cto/4188458978.html (November 13, 2013)

2014 - For sale: 1965 Plymouth Belvedere I station wagon. This is an old school drag car, never tubbed, inner fenders never cut. Have clear Va. title. Needs front floor pans and rear cargo area floor. No back glass. No motor or transmission. No back bumper, $3500 obo Some trading possible. Wagon has SMITH BROTHERS RACING written on the far-back side glass. See 3 photos. Joe. plymouthlover6369@yahoo.com (March 19, 2014)

2014 - For sale: 1965 Sport Fury Convertible restoration project and parts, (lots of parts). Near Chicago, Ill. Call Howard 312/ 952--5953 or HJKomish @ gmail.com (May 31, 2014)

2014 1965 Dodge Coronet for sale. Two owner car. Make offer. Follow the previous link for photos and contact information. (July 9, 2014)

2014 1965 Plymouth Belevedere II for sale, located in Newark Ca. 413 CI bored to 426, 727 trans with hi shift governor, hi lift cam, disc front brakes, new interior. $17K Click here to view photos and e-mail contact information. Once new window opens, click on the photo to enlarge view. (August 12, 2014)

Newest ads are at the bottom of each category!



Did we help your restoration? Support the 1962 to 1965 Web site with a donation.



Parts For Sale

Multiple Years Parts For Sale


Newest ads are at the bottom of each category!

Mopar DECALS for sale: “If ya can’t find it...make it!” So I did. The “Valiant” decal was factory installed on early-production 1960 Valiants (sometimes on the valve cover, sometimes on the air cleaner--see below), but obviously goes great on a Valiant of any year. The “Mopar Parts” decal with the Forward Look artwork is for pre-1964 cars. The air cleaner and coolant decals are for Canadian cars (“Chryco” instead of “Mopar”). I am super happy with how they came out; quality is awesome. The pics below are low-resolution (72dpi) scans; the actual decals have no jaggy effect to the text or artwork. They are printed on (and with) woodstove-grade high-temp materials; they will last for many years no matter what; they are not cheap junk suitable only for trailer queens that never get started or driven. $5/ea plus minimal postage. Contact Dan Stern at Contact Dan

CHRYCO air cleaner decal Chryco antifreeze decal Genuine Mopar Parts decal Plymouth Valiant decal


new OE turn signal switches
New OE turn signal switches for 1962 - 1963 and 1964 -1966 A B and C body Mopars without tilt steering.


For sale now: new gas caps for 1960 to 1966 A-body Mopars. These gas caps are NOT made in China!

Note how the handle is metal and not black plastic, and how it sits horizontally when installed, the way it is supposed to. Note the absence of dumb inapplicable warning text about fuel spray. Note how the retainer cam is spring steel so the cap will not flop around and leak.
gas caps for 1960 to 1966 A-body Mopars

Two varieties are currently (July 2012) available:
1) Picture-perfect shiny as shown, ideal for installation right out of the wrap, $31/each
2) Scuffed - not dented, just scuffed - from a boneheaded shipping error, ideal for painting body color (or using as-is if the rest of your car is also scuffed up), $21/ea.
Add $8 postage to send up to three caps in the lower 48 states.
“To order, PayPal dastern@torque.net make sure to include your full mailing address and a note saying how many of which variety you want. If you do not have PayPal (or had it and wish you did not because of their random bad behavior), sign up and use Dwolla with address 225@torque.net and take $3 off the price of each cap. If you do not use online payment because it is against your religious beliefs or for whatever other reason, send me an email at Contact Dan and we will work something else out.” — Dan

New Reproduction Mopar Parts For Sale from Joe Suchy. (Prices subject to change)
Joe suchy business card

Unit Item /  Description

$39.00 set 1962-1965 “B” body battery tray w/support bracket

$70.00 each Battery tray - Max Wedge trunk mount

$50.00 kit Hold down kit for the trunk mount battery

$0.75 each Battery tray hold down bolts (5/16-18 thread w/pointed tip)

$18.00 each 1960-1965 All bodies, Battery Hold Down

$12.00 set 1962-1969 Battery hold down J-bolts w/wing nuts

$21.00	set 1960-1965 All bodies, Battery hold down and J bolt combo

$12.00 set 1970-up? Battery hold down J-bolts w/hex nuts

$125.00 each 1962-1965 “B” Positive battery cable (90 degree or straight end)

$30.00 each 1962-1965 “B” Negative batter cable (90 degree or straight end)

$45.00 set Big block alternator bracket, bolts, and spacers

$15.00 set Big block alternator bolt and spacer package

$65.00 each 1962-1974 Fan belt idler pulley w/factory A/C

$65.00 each Idler pulley, 1962-1974 engines with A/C

$55.00 kit 1962-1968 “B” Metal fan shroud brackets, nuts, and bolts

$245.00 each 1962-1968 “B” Metal fan shroud - 2 pieces

$7.00 each Radiator overflow hose (specify 19 inch, 22 inch or 26 inch radiator)

$20.00 each Radiator cap, 14 pound, 1960-1966 all models MADE IN USA

$185.00	pair 1963-1965 Big block and Max wedge, 6 bolt valve covers, unpainted			[ADD LINE]

$285.00	pair 1964-1965 Street Wedge valve covers, chrome	

$49.00 each 1962-1967 push on chrome valve cover breather cap (OIL)

$19.00 each 1962-1967 push on unpainted valve cover breather cap (OIL)	

$45.00 each 1965“B” and 1965-1969  “A” Windshield washer reservoir (Will work on 1964 “B”)

$0.75 each  Windshield washer reservoir screws with sems washer  MADE IN USA

$35.00 each 1959-1966 Electric windshield washer pump

$5.00 each “F” Connector - windshield washer hose

$18.00 each 1963-1969 Engine to firewall ground strap (Hemi, Big and Small block)

$12.00 each V-8 Distributor cap, point type ignition

$35.00 each 1956-1972 Ballast resistor w/screw - all bodies

$15.00 each 1961-1965 Starter relay--Specify auto. or manual transmission

$11.00 each Wire-Neutral safety switch to starter relay

$10.00 each 1962-1970 Horn relay

$12.00 each 1965-UP? Fusible link

$13.00 each 1969-down Black engine harness 8 prong plug

$8.00 each Dimmer switch 1959-1980 cars and 1959-1989 trucks

$5.00 each 1960-1969 All-Door jamb switch/courtesy light

$60.00 each 1963-1974 “A” and 1962-1970 “B” Instrument voltage limiter (solid state)

$20.00 each 1963-1974 “A” and 1962-70 “B” Instrument voltage limiter (like original)

$75.00 each 1964-1965 Mopar “B” body reconditioned speaker	

$15.00 each Ignition lock tumbler w/keys-1948-1968 cars and 1961-1972 trucks

$30.00 set Ignition lock tumbler and door locks w/keys - 1966-1968 Cars

$30.00 each Ignition switch wo/lock tumbler 1960-1968 cars

$20.00 each Universal trunk lock w/keys, retainer clip, asst. shafts - 1962-1972 cars

$50.00 each Original replacement trunk lock and keys w/gasket (no blade) 1959-1965 “A” and “B” body each

$39.00 each Console lid/glove box door lock

$60.00 each 1962-1966 Turn signal switch

$10.00 each 1962-1966 Turn signal canceling cam

$0.50 each 1962-1965-Horn ring to switch insulator bushing

$0.30 each Screws for horn ring insulator bushings

$28.00 each 1962-1990 Steering column ball bearing

$38.00 each 1962-1965 “B” Steering column cover, bottom of dash

$9.00 each 1960-1965 Seat adjust knobs

$5.00 each 1960-1969 heater hose strap (soft aluminum)

$15.00 set 1964-1969 big block/hemi-heater hose nipple kit (two 5/8 hoses)

$10.00 kit 1962-1969 big block “Corbin” hose clamp kit

$11.00 kit 1962-1969 small block “Corbin” hose clamp kit

$10.00	kit Slant 6 Cyl., “Corbin” hose clamp kit

$70.00 set 1966-1967 Big block Spark plug wire loom kit

$60.00 set 1962-1965 Big block and Max Wedge Spark plug wire loom kit

$17.00 each Big block #7 Spark plug wire heat shield (1967 and later HP manifold)

$17.00 each Big block #6 and  #8 Spark plug wire heat shield (1967 and later HP manifold)

$17.00 each Big block #7 Spark plug wire heat shield (“B” 1962-1965, 1966-1969 2bbl, 1966 383 4bbl) Made in USA

$17.00 each Big block #8 Spark plug wire heat shield (“B” 1962-1965) Made in USA

$7.00 each 3/8-24 Exhaust manifold sleeve nuts (1.94 inch and 2.84 inch)

$15.00 each heater control cables

$135.00 each  1962-1965 “B” recored heater cores, non-A/C  (Made in USA)

$9./$10. set 1962-1965  “B” 2 piece non-A/C flex dusts  (Made in USA)

$9.00 set 1964-1965 “B” 2 piece non-A/C flex ducts Made in USA

$49.00	set 1964-1965 “B” 4 piece A/C flex ducts Made in USA

$99.00 each 1962-1965 “B” Throttle cables (Specify year, make, engine)

$99.00 kit 1962-1965 “B” Big Block 4 BBL, Throttle cable bracket, return spring & bracket

$225.00 each 1962-1965 Shift cables (Made in USA)

$205.00 each 1962-1965 Park cables (Made in USA)

$119.00 each 1962-1965 Speedometer cables ((Made in USA)

$69.00/$89.00 Each 1962-1965 Speedometer cable for ratio adapter or late model transmission ((Made in USA)	

$405.00	each Speedometer ratio adapter, 1962-1965 Transmissions - MADE IN USA

$3.00 each 1962-1965 “A” and “B” body two prong plastic wiring harness retainer

$1.00 each 3 inch plastic wiring harness retainer (fenderwell and core support)

$15.00 pair Max Wedge and Hemi w/Carter AFB’s cross ram throttle return springs - Made in USA

$200.00 kit Max Wedge linkage kit - Made in USA

$250.00 each Max Wedge and Hemi alternator pulley - Made in USA

$35.00 set Max Wedge exhaust manifold gaskets - Made in USA

$35.00 set Max Wedge exhaust manifold nuts - Made in USA

$195.00	each Max Wedge dual choke cable assembly - Made in USA
					
$60.00 each Max Wedge engine oil dipstick, and tube w/mounting bracket - Made in USA
 
$145.00 each Max Wedge transmission dipstick and tube w/mounting bracket - Made in USA
 
$75.00 each Max Wedge master cylinder heat shield - Made in USA

$60.00 set Max Wedge heater hose brackets (on inner fender) w/hardware/instruction MADE IN USA

$400.00	pair Max Wedge Air Cleaner set, w/filters, decals, hardware (black) MADE IN USA

$650.00	pair Max Wedge Air Cleaner set, w/filters, decals, hardware (chrome) MADE IN USA

$45.00 each 1964 Dodge parking light lens w/gasket

$59.00 each 1963 Plymouth parking light lens w/gasket

$4.00 each 1963 Plymouth parking light lens gasket

$50.00 pair 1963 Plymouth parking light bezel to body gasket

$0.50 each 1963 Plymouth parking light lens screws-stainless steel

$0.50 each 1964 Plymouth parking light lens screws-stainless steel

$69.00 pair 1964 Plymouth parking light lenses w/gaskets

$59.00 pair 1965 and 1967 Plymouth “B” parking light lenses w/gaskets

$195.00	pair 1963-1965 Plymouth back-up light lens/bezel assembly w/gaskets	

$60.00 pair 1963-1965 Plymouth back-up light lenses

$5.00 each 1963-1965 Plymouth back-up light lens gasket

$15.00 set 1963-1965 Plymouth back-up light lens and bezel gasket set

$30.00 each 1961 Plymouth and Most 1961-1965 Dodge, Chrysler, Imperial license plate light lens w/gasket

$50.00 pair 1963-1965 Plymouth license plate lenses w/gaskets

$4.00 each 1963-1965 Plymouth license plate lens gasket

$8.00 pair 1963 and 1965 Plymouth “B” body tail light bezel to body seal - all models

$239.00 pair 1963 Dodge 330 and 440 Tail light lenses

$395.00 pair 1963 Dodge 330/440 Tail light bezels

$38.00 pair 1963 Dodge 330/440 Tail light bezel to body gaskets

$76.00 each 1963 Dodge Polara/Polara 500 tail light lens w/gaskets

$490.00 pair 1963 Plymouth Tail light bezels

$5.00 each 1963 Plymouth foam gaskets for tail light assemblies

$56.00 each 1964 Dodge tail light lens w/gasket

$56.00 each 1964 Dodge Polara / Polara 500 back-up lens w/gasket

$49.00 each 1964 Dodge tail light lens bezel

$1.00 each 1964 Dodge tail light lens to bezel gasket

$18.00 pair 1964 Polara/Polara 500 tail panel to body seal

$12.00 pair 1964 Ploara/Polara 500 foam tail panel to body gaskets

$10.00 set (4) 1964 Dodge 330/440 tail light bezel to body seal (rubber bead-replacement)

$15.00 each 1964 Dodge 330/440 tail light bezel to body seal (rubber pad like original)

$445.00 pair 1964 Plymouth Tail light bezels

$50.00 each 1964 Plymouth Savoy and Belvedere tail light lens wo/chrome

$295.00 pair 1964 Savoy and Belvedere Tail light lenses

$295.00 pair 1964 Fury and Sport Fury tail light lenses

$10.00 pair 1964 Plymouth tail light lens to bezel gasket

$15.00 pair 1964 Plymouth tail light bezel to body seal--except station wagon

$5.00 each 1964 Plymouth foam gasket for tail light assembly-- except station wagon

$8.00 pair 1964 Plymouth tail light bezel to body seal --station wagon

$2.50 each 1962-1965 “B” body sta. wag. tail gate bezel seal-window mechanism

$490.00 pair 1965 Coronet and Coronet 440 Tail light bezels

$90.00 each 1965 Coronet and Coronet 440 tail light lens w/gasket

$225.00 pair 1965 Coronet and Coronet 440 tail light lenses

$38.00 pair 1965 Coronet and Coronet 440 Tail light bezel to body gaskets

$10.00 set 1965 Coronet foam tail light gaskets (two large and two small)

$490.00 pair 1965 Coronet 500 tail light bezels

$190.00 pair 1965 Coronet 500 tail light assembly top bezel

$495.00 pair 1965 Belvedere/Satellite tail light bezels

$80.00 each 1965 Belvedere II /Satellite tail light lens w/gasket, wo/chrome trim

$205.00	pair 1965 Belvedere I tail light lenses

$295.00 pair 1965 Belvedere II /Satellite tail light lens w/gasket, w/chrome trim

$5.00 each 1965 Plymouth foam gaskets for tail light assembly

$10.00 pair 1965-1970 “B” body console lens

$40.00 each 1963-1964 “B” console and 1957-up convertible rear panel courtesy light lens and bezel assembly  

$23.00 pair some 1964, 1965-1966 “B” body and some “C” body sail panel courtesy lens

$20.00 each Aluminum trim rings for the above sail panel courtesy lenses   

$15.00 each 1965-1966 “C” body dome light lens ~

$14.00 each fuel sending unit socks -5/16 or 3/8 - Made in USA

$2.00 each fuel sending unit gasket

$8.00 each fuel sending unit lock ring (galvanized)

$12.00 each fuel sending unit lock ring (stainless)

$18.00 each fuel sending lock ring wrench

$8.00 each fuel sending unit float (brass)

$10.00 each fuel tank grommet (nitrile) 1967-1974 “A”, 1964-1969 “B”, 1971-1974 “B” bodies

$3.00 each fuel filler neck “O” ring, original 1962-1963 “B” body fuel tank

$15.00 each fuel filler neck grommet, 1963  1966 “A” body

$7.00 each fuel tank “J”-bolt w/nut

$98.00 each 1962-1965 “B” Fuel sending unit (5/16)

$98.00 each 1962-1965 “B” Fuel sending unit (3/8)

$10/$14 each Sending unit ground strap (steel or stainless steel)

$185.00 each 1962 - 1965 “B” body gas tanks (made in Canada by OE manufacturer)

$35.00/$60.00 each 1962-1965 “B” gas tank strap (galvanized or stainless steel)

$2.00 each 5/16 inch Fuel and brake line clips

$2.50 each 3/8 inch Fuel line clips

$5.00 each 1962-1965 “B” and 1963-1966 “A” Oval plastic firewall plug

$70.00 each 1962-1965 “B” gas tank filler neck

$8.00 each firewall drain flap

$7.00 each 1964-UP? grommet-firewall/speed-o-meter cable

$8.00 each grommet-firewall/heater core

$27.00 each grommet-firewall/push button shifter and park cables

$25.00 each grommet-firewall plate to steering column jacket

$15.00 each grommet-firewall/emergency brake cable

$25.00 kit 1962-1965 “B” body-firewall seal kit - Made in USA

$8.00 kit Cowl vent oval  butterfly seals - Made in USA

$10.00 kit 1963-1966 “A” and 1962-1965 “B” windshield wiper pivot seal kit - Made in USA

$10.00 pair Winshield wiper arm tension springs, 1962-1964 “B”, Probably “A” and “C” - Made in USA

$30.00 kit 1962-1965 “B” body - firewall insulation kit - Made in USA

$9.00 each 1962-1965 “B” body - heater delete insulation pad - Made in USA

$15.00 kit 1962-1965 “B” body-kick panel insulation - Made in USA

$10.00 kit 1962-1965 “B” Heater box insulation (2 pcs) - Made in USA

$25.00 each 1963-1965 “B” Hood insulation (1/2 inch thick flat - not molded) - Made in USA

$30.00 each 1962 “B” Hood insulation (1/2 inch thick flat - not molded) - Made in USA

$2.00 each 1960-1965 Hood insulation clip

$38.00 kit 1962-1965 “B” body plug kit

$28.00 each 1962 “B” body core support to hood seal MADE IN USA

$30.00 each 1963-1965 “B” core support to hood seal (small) MADE IN USA

$40.00 each 1963-1965 “B” core support to hood seal (large) MADE IN USA

$30.00 each 1962-1965 “B” cowl to hood seal

$40.00 each 1963-1965 Plymouth tailpanel seal

$40.00 each 1962-1965 “B” station wagon tail panel seal

$35.00 set 1965 Coronet tail panel seal (where applicable)

$75.00 pair 1963-1965 Dodge “B” Fillers-rear bumper corner to quarter panel

$16.00 set L/R 1963 Dodge splash shield seal front fender front shield

$16.00 set L/R 1963 Plymouth splash shield seal front fender front shield

$18.00 set L/R 1964 Dodge splash shield seal front fender front shield

$22.00 set L/R 1964 Plymouth splash shield seal front fender front shield

$16.00 set L/R 1965 Plymouth splash shield seal front fender front shield

$16.00 set L/R 1965 Coronet splash shield seal front fender front shield

$35.00 set L/R 1963-1965 “B” body splash shield seals, front fender, rear shield (specify year and make)

$175.00 pair 1963-1965 Dodge/Plymouth “B” body, front fender, rear splash shields

$1.50 each 1962-1972 “B”, 1967-1969“A”, 1970-1974 “E”, rear splash shield screw w/lg washer 

$29.00 pair 1962-1965 “B” Covers-Inner fender “A” frame adjust access holes

$8.00 pair 1962-1965 “B” body seal-hangs on frame between core support and K-frame

$10.00 pair 1962-1965 “B” body seal-covers hole where brake line goes through inner fender

$10.00 pair 1962-1965 “B” body seal-covers hole where frame, firwall, and floor meet

$6.00 each 1962-1965 “B” seal-starter shield w/staples

$145.00 each 1962-1966 “A” and “B” body two post outside mirror (the “correct” reproduction)

$10.00 each two post mirror gasket/screw package

$120.00 pair 1963-1966 “A” body outside door handles w/hardware and gaskets (Mostly USA)

$120.00 pair 1962-1965 “B” body outside door handles w/hardware and gaskets (Mostly USA)

$120.00 pair 1966-1967 “B” body outside door handles w/hardware and gaskets (Mostly USA)

$75.00 pair 1967 1/2-1971 Truck outside door handles w/hardware and gaskets (Mostly USA)

$10.00 set outside door handle gaskets, 1963-1966 “A”, 1962-1965 “B”, and 1967 1/2-1971 truck

$10.00 set outside door handle gaskets, 1966-1967 “B”

$2.00 each 1962-1965 door lock gaskets

$5.00 each 1962-1965 “B” body door hinge roller

$240.00	set 1962-1965 “B” body door hinges

$2.00 each 1962-up? trunk lock and 1966-up? door lock gaskets

$2.00 each 1962-up? trunk lock and 1966-up? door lock retainer clip

$15.00	pair 1963-1976 “A”, “B”, and “C”,  plastic trunk torsion bar  sliders	

$6.00/$5.00 pair 1962-1974 interior door lock button-chrome or black

$12.00	pair 1962-1974 interior door lock buttons - red, blue, tan, green	

$6.00 pair Grommet for interior door lock buttons

$50.00 pair 1963-1966 “A”, “B”, and “C” body inside door handles

$40.00 pair 1963-1966 “A”, “B”, and “C” body window cranks (3 inch, 4 inch and 6 inch)

$1.00 each Internal wrenching hex screw for above door handles and window cranks

$16.00 each 1964-1965 “B” 2 door hardtop interior trim screw kit w/map

$1.00 each Black wear washers for above door handles and window cranks

$34 ea Ash tray 1964-1966 “A” and “B” rear arm rest / 1967-1969 “A” convertible side panel

$60/$70 pair 1964-1966 “A”&“C”/ 1964-1965“B” arm rest pad-Black/colors

$80/$85 pair 1964-1966 “A”&“C”/ 1964-1965 “B” arm rest bases-chrome

$1.00 each Clip nut in door for arm rests  MADE IN USA

$195.00 each 1963 Plymouth instrument cluster bezel pad

$0.75 each 1962-1974 window regulator to channel retaining washer (4 internal prongs)

$19.00	kit 1962-1965 “B” 1962-1966 “A” Window regulator retaining washers and leather washers

$150.00 each 1962-1965 “B” body radio antenna

$4.00 each 1962-1965 “B” body radio antenna gasket

$115.00 each 1964-1965 “B” body radio delete plates-Metal like original

$6.00 each 1962-1963 “B” Speaker delete (low and  medium priced cars) Made in USA

$35.00 each 1962-1966 “A” and “B” body steering column to shaft seal

$20.00 kit steering knuckle repair kit (seal in this kit is red)

$12.00 each steering knuckle seal only, black in color

$245.00 each 1964 “B” Steering wheel black (Belvedere, Fury, Dodge 440, and Polara)

$255.00 each 1964 “B” Steering wheel  red or tan (Belvedere, Fury, Dodge 440, and Polara)

$245.00 each 1965-1966 “B” Steering wheel - two spoke - black

$255.00 each 1965-1966 “B” Steering wheel - two spoke - red or tan

$265.00 each 1965-1966 “B” Steering wheel - two spoke - blue

$20.00 each clutch fork boot

$40.00 each 1962-1965 “B”, 1963-1971 “C” Firewall clutch rod boot (NOS)

$19.00 each 1962-1965 “B”, 1963-1971 “C” Firewall clutch rod boot (reproduction)

$5.00 each 1963-up?  most bodies-clutch pedal upstop (rubber)

$5.00 pair Nylon bushings for z-bar (two pair per z-bar)

$7.00 each Wire retainer clip for z-bar nylon bushings

$5.50 each rubber grease seal-ball to z-bar (two per z-bar)

$2.00 each Nylon wear washers-clutch linkage (three per car)

$3.00 each Spring clip-clutch linkage (three per car)

$45.00	Kit 1962-1965 “B” body clutch linkage adjust rod  kit

$85.00 each 1963-1965 “B” body shifter boot console and non-console

$85.00 each 1963-1965 “B” body chrome shifter boot bezel non console

$85.00 each 1963-1965 “B” body 4-speed under carpet seal

$165.00 each 1963-1965 “B” body 4-speed floor hump (metal like original)

$95.00 each 1964-1965 “B” and “C” body fiberglass 4-speed console hump

$169.00 each 1963-1965 “B” body 4-speed crossmember

$35.00 pair Torsion bar seals and retainer clips “A”, “B”, and “E”

$39.00 each 1962-1965 Large boot (most V-8s)-ball and trunnion driveshaft w/clamps

$375.00 pair 1964 Dodge “C” shaped fender headlight surrounds

$140.00 pair 1964 Dodge - Teardrop Triad for top of front fender

$40.00 each 1963 “Fury” fender script

$40.00 each 1963-1966  “Sport Fury” script (correct zinc diecast)

$40.00 each 1963-1964 Savoy “Plymouth” front fender script

$40.00 each 1963-1964 Belvedere “Plymouth” front fender script

$95.00 set 1963-1964 “B” Zinc die cast “PLYMOUTH” hood/trunk letters
 
$95.00 set 1965 “B” Zinc die cast “PLYMOUTH” hood/trunk letters

$95.00 set 1965 Coronet “DODGE” trunk letters

$10.00 each Pentastar

$75.00 each 1964 Plymouth “NOS” hood ornament, 6 cyl. and small block

$425.00 each 1964 Plymouth hood ornament big block

$60.00 pair 1964 Plymouth hood ornament decals-correct anodized alum.-383 and 426

$325.00 each 1964 Dodge trunk emblem

$275.00 each 1965 Coronet and Coronet “440” trunk emblem/bezel

$18.00 each 1962-1965 Most “B” body glove box

$22.00 each 1963 Plymouth glove box

$40.00 pair 1964-1967 “B” body bench seat hinge covers (black or white only)

$119.00 pair 1964-1967 “B” body bench seat hinge covers (chrome)

$2.00 each Nut - front seat hold down

$19.00 pair 1962-1965 stops - 2 door seat back (plastic cup)

$320.00 pair 1963-1966 “A” and 1964-1965 “B” bodies-Convertible top latch mechanism

$70.00 pair 1963-1966 “A” and 1963-1965 “B” bodies-Convertible top guide pin (stainless)

$12.00 pair 1962-1970 “A”, “B” and “C” bodies convertible top pin socket (plastic)

$30.00 set 1963-1971 “A”,“B”,“C”,& “E” Convertible door alignment wedges w/screws

$0.50 each convertible top boot snap studs w/screw

$4.00 set 1964-1965 “B” convertible sun visor screws (4 countersunk and 2 round head)

$475.00 pair Pot metal, top of quarter panel belt trim,  1964 Plymouth and 1965 Belvedere II convertible

$19.00 pair 1962-1965 Plastic sun visor tips

$100.00 pair 1962-1965 Sunvisors - several colors  

$60.00 each 1962-1965 “B” body - accelerator pedal MADE IN USA

$5.00 set 1962-1965 “B” body - accelerator pedal pivot gasket and grommet set MADE IN USA

$15.00 each 1962-1966 “A” and 1962-1965 “B” body clutch and brake pedal pads (manual trans) MADE IN USA

$20.00 each 1962-1966 “A” and 1962-1965 “B” body brake pedal pad (auto trans) MADE IN USA

$12.00 each 1963-1965 “A” and “B” body emergency brake pedal pad MADE IN USA

$130.00 set 1962-1965 “B” E-brake cables, connectors, clips, grommet  

$50.00 set 1962-1965 “B” body big block engine mount brackets

$20.00 each Late 1962-1965 “B” body motor mounts

$150.00 pair Late 1962-1965 “B” Poly Lock motor mounts MADE IN USA

$99.00 each 1963-1965 “B” Poly transmission mount (Specify Auto/Manual) MADE IN USA

$99.00 each 1962-1965 “B” Poly trans adapter mount for use w/ late model torquefite MADE IN USA

$4.00 each 1962-1963 Plymouth and Dodge wedge shaped bumper-fender/hood (2/car) MADE IN USA

$4.00 each 1964 Plymouth wedge shaped bumper - fender/hood (2/car) MADE IN USA

$2.50 each 1965 Plymouth and Dodge wedge shaped bumper - fender/hood (4/car) MADE IN USA

$2.00 each round rubber bumper - fender/hood at rear corners (2/car) MADE IN USA

$1.50 each round rubber bumper - hood adjust, wo/stud MADE IN USA

$3.00 each round rubber bumper - hood adust, w/stud

$2.00 each round rubber bumper - license plate mounting frame MADE IN USA

$2.00 each 1962-1969 rubber door bumper (2/door) specify year MADE IN USA

$2.00 each 1962-1967 “B” and 1967-1971 “A” trunk bumper MADE IN USA

$0.50 each Glove box bumpers MADE IN USA

$1.00 each Ash tray bumpers MADE IN USA

$0.50 each 1965 and earlier license plate screw/nut combo

$1.50 each plastic snap in license plate nut

$1.50 each fast twist license plate screw-used with plastic nut above

$90.00 each 1962-1965 “B” body windshield gasket (specify year, make, model)

$90.00 each 1962-1965 “B” body rear window gasket (specify year, make, model)

$230.00 pair 1962-1965 “B” body station wagon quarter window gasket w/lock strip

$22.00 set 1962-1965 “B” body windshield reveal moulding clip/screw package

$13.00 set 1962-1965 “B” body convertible windshield revel molding clip/screw package

$27.00 set 1962 “B” body rear window reveal moulding clip/screw package

$15.00 set 1963 “B” body rear window reveal noulding screw package

$22.00 set 1964-1965 “B” body sedan rear window moulding clip/screw package

$22.00 set 1964-1965 “B” body hardtop rear window moulding clip/screw package

$0.10 each Wheel lip and some windshield moulding screws

call for quote -  Side and Rocker moulding clips for some of the 1962-1966 Mopars

$22.00 kit 1964-1965 Dodge “B” Belt line moulding clips

$0.20 each 10-24 flange nut for moulding clips

$1.00 each folded sheetmetal acorn nut for ends of door side mouldings

$0.15 each stamped steel thread cutting nuts for moulding clips and script (1/8, 5.32, 3/16)

$0.30 each tube nuts- for script w/1/8 stub and 3/16 hole in the body

$0.50 each 10-24 thread “U” type foldover nut

$55.00 pair 1963-1966 “A” /1962-1965“B” body vent window frame to “A” pillar seal

$160.00 pair 1964-1965 “B” vent window triangle seal - 2dr HT and Convertible

$185.00	pair 1962-1965 “B” vent window triangle seal - 2dr and 4dr Sedans MADE IN USA

$10.00 set 1962-1965 “B” body vent window bottom trim gasket (1 set/car)

$38.00	pair Rubber stop, top of vent window divider channel, HT/Conv, 1962-1965 “B” - MADE IN USA  

$20.00 each 1962-1965 “B” Support bracket-Bottom of vent channel to bottom of door  

$19.00 pair 1962-1965 “B” body-Plastic tip for vent window handles

$90.00/$95.00 set 1962-1965 “B” body window felts (specify year, make, and model)

$30.00 each 1962-1965 “B” body station wagon tail gate window inner felt

$40.00 kit Mid year 1962-1965 “B” and 1963-1966 “A” tailgate window outer weatherstrip  Made in USA

$9.00 each Mid year 1962-1965 “B” tail gate window channel slide to regulator bolt	Made in USA

$30.00 each 1962-1965 “B” body station wagon lower tail gate seal

$8.00 set 1962-1965 “B” body station wagon window channel liner

$70.00 set Station wagon roof rack rubber pads and strips, most bodies 1962-1966 MADE IN USA

$70.00 set 1962-1965 “B”' body sedan-window channel run

$3.00 foot 1962-1965 “B” body vent window channel liner (7 foot sedan and 11 foot hard top and convertible)

$85.00 each 1962-1965 “B” body convertible header seal

$45.00 set 1962 “B” body convertible roof rail seals

$90.00 set 1963-1965 “B” body convertible roof rail seals

$2.00 each Grommet - Convertible top pump mounting

$17.00 each 1963-1965 “B” Convertible trunk divider Made in USA

$15.00 each 1963-1965 “B” Convertible seat back panel	Made in USA

$70.00 pair 1963-1965 “B” body-roof rail seals-2 and 4 door hardtop

call for quote - Carpet by Trim Parts for 1962 to 1965 Mopars - (specify year, make, and model)

$55.00 pair “U” shaped seal on “B” pillar; 1962-1965 “B” body 2dr HT and Convertible

$1.00 each Nickel plated plug buttons, latch side of doors, 2 per door, 1962-1965 “B” body

$16.00 set 1962-1964 “B” body 4dr H.T. “B” pillar vertical weatherstripping

$5.00 foot 1962-1965 Windlace - specify body style and color

$8.75 pair 1962-1965 Compact windlace-Used around quarter window on 2dr. sedan

$10.00 each 1964-1965 Compact windlace-used on rear window-2dr/4dr sdn and 4dr HT

$245.00 set 1962-1965 “B” body inner sill plates only

$320.00 set 1963-1965 “B” body inner and outer sill plates

$20.00 each 1963-1970 “B” body trunk seal

$32.00 each 1962 “B” body trunk seal

$30.00 pair 1963-1965 Plymouth /1962-1965 Dodge “B” trunk well extension covers

$17.00 each 1962-1965 “B” body seat back/trunk divider

$585.00 each 1962-1965 “B” Mopar Trunk floor pan

$210.00 Pair 1962-1965 “B” Trunk floor extensions

$180.00	each 1963-1965 “B” Plymouth, rear lower quarter panel patch, wheel well to bumper 

$95.00 each 1963-1965 “B” Moulded trunk mats

$635.00 each 1962-1965 “B” Complete one piece floor pan w/e-brake cable brackets

$145.00 each 1962-1965 Plymouth, 1962 and 1965 Dodge “B” rear foot pans-2 pcs-L&R

$325.00 each 1963 Dodge front valance, under the bumper

$20.00 each 1962-1965 “B” Support bracket - Bottom of vent channel to bottom of door

$8.00 pair 1962 “B” body, seal-front edge of quarter glass for HT and Conv. (not flocked)

$20.00 pair 1963-1970 “B” body, seal-front edge of quarter glass for HT and Conv. (flocked)

$45/$75 pair 1964-1966 “B”body 727 transmission lines - original material / Stainless steel

$65/$75 set 1962-1965 “B” body Engine compartment 3 brake line kit - OM or S/S

$29/$37 set 1962-1965 “B” body Rear Axle 2 brake line kit - OM or S/S

$5.00 each 1966-up? plastic bushing for trans. shift linkage

$65.00 set 1964-1965 “B” body 3 piece brake line set (engine compartment)

$10.00 set Axle adjust lock pawl/flanged nut-for 8 3/4 right axle

$2.00 each Lug nut 1/2-20 x 3/4 Hex RH

$2.00 each Lug nut 1/2-20 x 3/4 Hex LH

$2.25 each Bumper bolts -  7/16 Complete with washers and a nut 

$1.25 each Bumper bolt - 1/4 inch w/nut (For 1962-1965 “B” Station Wagon back-up lights)	

$38.00 pair 1963-1965 Plymouth and 1963 Dodge “Teardrop” shaped bumper guard pad only

$20.00 set Leaf spring shackle bushings (set of 8)

$40.00	pair 1962-1974 “B” body, Leaf spring shackles w/bushings	

$20.00 set Leaf spring “U” bolts w/tall nuts, for 3 inch housing (8 1/4, 8 3/4, Dana 60, etc.) 

$245.00 each 1962-1965 “B” body Windshields -- Clear or Tinted

$10.00 each 1962-1974 “B” and 1970-1974 “E” spare tire hold down wing nut

$30.00 each 1962-1965 “B” Spare tire hold down hook MADE IN USA

$7.00 each “K” frame bolts  MADE IN USA  

$1.00 each Oil pan bolts MADE IN USA 

$1.00 each Crank pulley bolts, 3/4 inch or 7/8 inch long MADE IN USA

$2.00 each  Horn bolts MADE IN USA 

$2.00 each  Radiator bolts MADE IN USA 

$0.60 each Heater box firewall nuts  MADE IN USA  

$1.50 each Educated nut, spindle cotter pin MADE IN USA

$14.00 each Hub dust cover, drum brake, NOS MADE IN USA
 
$1.25 each Valve cover hold down studs MADE IN USA 

$1.50 each Valve cover hold down nuts MADE IN USA

$30.00 each 1962-1970 “A” and “B” body, Main exhaust hanger, 1 7/8 inch and 2 1/4 inch MADE IN USA

$30.00 each 1962-1965 “B” body, Tail pipe hanger MADE IN USA

$10.00 each 1962-1965 2 1/4 inch tail pipe clamp, use with above hanger	MADE IN USA

$17.00 each 1962-1965 2 inch tail pipe clamp, use with above hanger MADE IN USA

0.40 each Wave washer, emergency brake lever to brake shoe MADE IN USA

$12.00 each 1962-1964 Push button, park lever overcenter spring	MADE IN USA

$125.00 each - 1965 Dodge Coronet hood trim -  MADE IN USA

$225.00 each 1963-1964 Plymouth stainless steel trunk trim (except 1964 Belvedere) MADE IN USA

$15.00 each Bee Hive hood pop-up springs, most 1963-1966 “A”, “B”, “C” and Imperial

$5.00 each Decals -  Air cleaner, anti-freeze, battery booster, jack instruction, 426. as-is no warranty -  MADE IN USA

$4.00 each Decal - Jack base, Convertible top lift pump fluid -  MADE IN USA

$15.00 pair Decal - Max wedge valve covers -  MADE IN USA

$7.00 each Decal - AirTemp window sticker - MADE IN USA

$25/$45	each 1962-1965 “B” body, package tray -  MADE IN USA
		
$12.00	each 1962-1965 “B” body package tray jute - MADE IN USA

$85.00	each 1962-1965 Headliners - MADE IN USA

$20.00	each 1962-1965 Headliner insulation - MADE IN USA

$12.00	each 1962-1965 Fuel tank pad   - MADE IN USA

$600.00	each 1964 Plymouth dash pad - MADE IN USA

$125.00 each 1962-1965 “B” Heater delete deflector cone - MADE IN USA

3.00 each Clip, 1963 Plymouth park bezel to fender, 1964 Plymouth and 1965 Belvedere tail panel MADE IN USA

$35.00	kit 1962-1965 “B” body fender bolt kit

(Prices subject to change) revised 5-19-2014

Tons of used 1962-1965 “B” body parts also available for sale.

Coming Soon:

1965 “B” body Dodge filler - rear bumper corners to quarter panel

1963-1965 Plymouth  Major quarter panel patch panel

1964-1965 Dodge dash pads

1963 Dodge park light lenses
 
1964 Plymouth park light lenses 

1964 Chrysler park light lenses

1963 Dodge rear valance

1963 Plymouth front valance

1962-1965 “B” body, inner & outer trim lower trim for the vent windows

1962-1964 “B” body windshield washer bags.


Joe Suchy also has tons of used 1962-1965 “B” body parts also available for sale.

Contact Joe Suchy in Fairburn, GA  JoeSuchy64 AT gmail.com (Replace the AT with @ to contact.)
or phone 770.964.4441. Tell Joe that Gary H. from the 1962 to 1965 Mopar Web site says hello!

Joe suchy business card

Joe Suchy Mopar Parts For Sale as of 8-18-2014  (Prices subject to change) 

Charlie 65Satelliteman’s 1962 to 1965 Mopar Restoration Services and Parts For Sale:
* Steering wheel restoration to high point scoring quality.
* Armrest sets completely restored for all of the 1962, 1963, 1964 and 1965
A, B and C body Mopars to like, or better than new, condition in some instances.
* High quality replacement grill emblems for the 1965 Belvedere I, 1965 Belvedere II,
1965 Plymouth Satellite, 1965 Plymouth Fury I-II-III and 1965 Sport Fury.
(Usually all of the five models of grill emblems made go on Ebay with a
starting bid price of $130.00 including free priority mail shipping in the continental USA.
International shipping is available.)
* 1965 Dodge Coronet 440 and 500 rear trunk emblem inserts for sale
* 1962 Plymouth Savoy, Belvedere, Fury and Sport Fury hood and trunk emblem inserts now for sale.

Charlie has thousands of nice rare parts for early B-bodies that he will be selling
off due age and health issues. Most of the parts are for the 1965 Plymouth Belvedere
and Satellite models, but there are still quite a few out in the warehouse for
the other B bodies as well.

Phone Charlie (65Satelliteman) week nights, only between 6pm to 9pm eastern time,
with any questions or parts inquiries at 989-362-8463 or
email mitzi265 NOSPAM hotmail.com (Replace the NOSPAM with @ to email Charlie. (January 1, 2012)

For sale: Two motor mount brackets, two new insulators, and a set of bolts and nuts for the the same. Fits 1964 BB Bodies. Also 1963 and 1965. (1962 I am uncertain.) George bt6t4 AT yahoo.com (May 8, 2012)

For sale: One pair of bare 286 heads with the rocker arms and shafts. Heads are cleaned and magged but need to be machined, which I can do myself if interested. Call for more details. $900.00 Phone Stan area code 478 and 279 2307 (October 4, 2013)

CROSSRAM CONNECTION is proud to announce that our P/N CC-110 Wire Harness Clips are currently available for sale again. These Metal Vinyl Wire Harness Clips were used on 1962-1964 Max Wedge and 1964 and 1965 Race Hemi Vehicles. Three were used on the Drivers Side and two were used on the Passenger Side. We do not know for certain why they were used but can assume the Driver’s Side Clips were used because of the heat generated by Max Wedge Upswept Exhaust Manifolds. Also as these vehicles were primarily race vehicles, it was easier to disconnect the wire harness using these clips rather than the plastic straps. (These are our assumptions and not necessarily facts. What we do know is there were five used per car and we have see applications using as many as six.) These Harness Clips are very expensive to manufacture as there are several steps involved in the manufacturing process such as metal forming, heat treating, black oxide finish and vinyl coating. These Harness Clips are $25 each. Contact Norm at CROSSRAM CONNECTION

2014: --For sale: brand new steering column seal for the bottom end of the column tube that projects into the engine bay for all 1962-1965 B Bodies. This is a quality reproduction rubber seal that has a nylon inner bushing molded in that seals around the steering shaft. Pictures are available. $40 plus S&I Contact Mike at mkitner @ carolina.rr.com or call 910 419 9950

2014: Dodge and Plymouth rear tailgate station wagon glass for sale. Came out of 1963 or 1964 Mopar Dodge and Plymouth 'B' body station wagon. Decent driver quality. In Houston, Texas. $25 (plus shipping) (January 1, 2014) contact Gary

2014: For sale: one set of nice window cranks for a C-body Mopar. Pictures available upon request. Allen 330 603.5482 or awm440 @ gmail.com (March 24, 2014)

SOLD 2014 -- 1964-1965 Mopar B-body center console for an automatic car for sale. No shifter. No hinges on console door, clock delete plate. Pictures available upon request. Allen 330 603.5482 or awm440 @ gmail.com (March 24, 2014)

2014: For sale: two 1962-1965 B-body transmission mounts (the frame part). Pictures available upon request. Allen 330 603.5482 or awm440 @ gmail.com (March 24, 2014)

2014: For sale: one unused polyurethane transmission mount for 1962 to 1965 Mopars. Pictures available upon request. Allen 330 603.5482 or awm440 @ gmail.com (March 24, 2014)

2014: For sale: 383-440 cooling fans. One five blade and one seven blade w/clutch. Pictures available upon request. Allen 330 603.5482 or awm440 @ gmail.com (March 24, 2014)

2014: For sale: 440 Mopar distributor and electronics. Pictures available upon request. Allen 330 603.5482 or awm440 @ gmail.com (March 24, 2014)

2014: For sale: 383-440 180 degree thermostat and gasket. NOS 2002. Pictures available upon request. Allen 330 603.5482 or awm440 @ gmail.com (March 24, 2014)

2014: For sale: 440 Edelbrock Performer intake manifold. Pictures available upon request. Allen 330 603.5482 or awm440 @ gmail.com (April 8, 2014)

2014: for sale: 1972 440 block . Fresh from machine shop. Bored .040 over, honed with torque plate, line honed, ready to finish hone and assemble Located in South Delaware. I also have a number of other parts for building the engine: new standard size Clevite bearings and a new double roller timing chain. Call George at 302 988 1485 or e-mail georgemaxlear @ yahoo . com (March 31, 2014)


Specific Years Parts For Sale

1962 Parts For Sale

1962 Dodge Parts For Sale, Parting out two 1962 Dodge 330 cars, one a V8 2 door sedan, one a 6 cylinder automatic 4 door sedan. The 2 door is rough, missing motor and transmission; the 4 door is mostly complete. 2 door sedan doors good, as are quarters, All glass in both cars, good trim, good grilles,instrument clusters,interior parts etc.Located in PA. -- panan @ atlanticbb . net or phone 814 239 56 76 (Aftet 7:00 PM only) ask for Pat

For sale: 1962 Chrysler New Yorker 4 door hardtop parts: 1) rear window; located in Nebraska but I could drive an hour or two one way for the right price. What is it worth. Please call 4026080479. I can send a picture if interested. 2) Also have a drivers side remote mirror. Nice shape. 3) Headlights and brackets that hold them in. 4) a radiator that has been cleaned and pressure checked for a 383 engine. John. call 402 6080479 (11-24-2013)

2014 -- For Sale, an excellent pair of red tail light lens for a 1962 Plymouth B - Body (Savoy, Belvedere and Sport Fury). Both are OEM mfg. with no cracks and just very minor scuffs. If you are building or have built a 1962 you know these are extremely hard to find in nice shape. Included are a few gaskets and a few light assembly to body rubber seals as a bonus. link to see pictures Located in NC - $50 plus S&I Contact Mike at mkitner @ carolina.rr.com or call 910 419 9950 (January 14, 2014)

2014 --1962 Dodge parts for sale: License plate surround $40. Rear filler panels for above back bumper, three pieces $75. Chrome 4-bolt valve covers $150. All items plus shipping, pictures available. Email longroof63 @ aol.com (January 14, 2014)

2014 --1962 Dodge 1962 Polara 500 parts for sale for my friend: 4 piece rear body trim (both hash mark trim, rear body trim (below the trunk lid?) and both top of quarter panel trim - $400 plus shipping from 22657; 13 pieces of the thin stainless steel trim than runs the length of the body plus connecting trim, etc, both inner and out headlight bezels, grille surround trim (no grille), and hood emblem - $400 plus shipping from 22657; Metal dash with instrument cluster, glove box line and lid, heater controls, pushbutton controls and complete cables for a big block 727, misc dash pieces. He might have the speaker grille but could not immediately put his hands on it - $400 plus shipping from 22657; Factory single snorkle air cleaner for a 4 barrel, was gold in color at one time - $40 plus shipping from 22657; factory dual point big block (361) - $40 plus shipping from 22657. I have pictures of everything, email to me would be best.Email Don. -- mopar 4 me at shentel dot net (January 14, 2014)

2014 - for sale: 1962 Chrysler Torqueflite A-727 Fresh Rebuild. Zero miles on Keizer Transmission rebuild, 1962 Chrysler big block A-727 Torqueflite with parking brake tail and remanufactured torque converter. 413 Crankshaft available, too. $1200 for all, will consider Mopart$ offers. Transmission from a 1962 Imperial, the 2 piece driveshaft is also available. Transmission is in Western Oregon. Contact: anon.amos97@yahoo.com (June 11, 2014)

2014 - for sale: 1962 Sport Fury Convertible parts: Right quarter panel Rust free with quarter extension and part of trunk floor $1500; Right and Left Fenders rust free $450 each; Lower grill panel $50; Upper radiator support with Headlamp seats $100; Front Valance $200; Rear Valance $200; E-mail me at hemial @ hotmail.com or call 908-361-0013. Items located in Newville PA. Thanks Al (July 20, 2014)

Newest ads are at the bottom of each category!

1963 Parts For Sale

1963 T-10 4 speed for B-body for sale, very rare. Transmission is located in Los Angeles, CA. Les Juhos 818/625-9290 e-mail ljuhos AT socal.rr.com (March 30, 2014)



Parting out 1963 Dodge, 440 model, 4 door, complete car.

hood - some structural rust near hinge area 100.00

fenders fair condition - some rust in lower dog leg area 100.00 ea

trunk lid rust in seam area 50.00

4 door doors 50.00 ea

bumpers, cores 50.00 ea

bumper brackets 100.00 front - 100.00 rear

8 3/4 rear axle with axle nuts complete 742 open center hwy gears complete 250.00

318 wide block, poly, stuck, 150.00 complete0-- will part engine out no part to small: brackets, pulleys etc.

rear seat [4 door] 2 door may be different 50.00 pr

front 4 door bench seat 50.00

grille fair cond 250.00

pass headlight alum ring 1 dent 25.00

side trim - inquire

front clip frame rails, torsion bar crossmember, inner fenders,cowl,rad. support good cond $750.00

rear clip - 4 door good frame rails 500.00

tail light lenses 50.00 pr

reverse lenses - stress cracks 10.00 ea

tail light bezels - pitted 15.00 ea

reverse lens bezels fair cond 20.00 ea

license plate bracket 40.00

trunk emblem 25.00 - fair cond

hood emblem 35.00 - fair cond

door handles good cond 20.00 ea

front windshield trim 125.00

rear windshield trim - 75.00

rear view mirror - 20.00

ashtray 20.00

glove box door 20.00 aqua color

trunk latch 20.00

hood latch/safety catch/hook 50.00

tail light harness 50.00

headlight harness 75.00

440-pillar emblems 15.00-set

wiper arms air foil - 75.00 set

hood hinges - 50.00 pr

radiator #$2276838 100.00

dash parts

gauge cluster 100.00

switches 50.00 ea

dash frame 100.00

steering column for power steering 100.00

steering wheel fair cond 50.00

Located in Edinboro PA 16412  mkyman AT hotmail.com  -- (February 26, 2013) 

Parting out 1963 Plymouth Belvedere 4 door Arizona car; no rust out anywhere, interior bad, very nice sheet sheet metal, trim and glass. Car is now in Burgaw, NC. Email me with needs. Reasonable prices. mark.riesch@yahoo.com (October 14, 2013)

2014 - For sale_ two 1963 Plymouth B-body spinner hub caps. Pictures available upon request. Allen 330 603.5482 or awm440 @ gmail.com (March 24, 2014)

2014 - For sale two 1963 Plymouth hub caps. Pictures available upon request. Allen 330 603.5482 or awm440 @ gmail.com (March 24, 2014)

Newest ads are at the bottom of each category!

1964 Parts For Sale

Newest ads are at the bottom of each category!

1964 Plymouth Belvedere trim for sale. Complete set of 1964 Plymouth Belvedere 2 door side trim in good condition. The passenger side spear needs a small repair on the very tip. Price $150.00. If interested I can send photos. The parts are in Princeton, In. Email w.sporeATinsightbb.com or call cell 812-677-1677. (December 13, 2011, revised January 1, 2012)

For sale: Set of new bumper bolts, nuts, and washers still in original plastic. Fits my 1964 Dodge Polara. 12 total. 6 front, 6 rear. George bt6t4 AT yahoo.com (May 8, 2012)

For sale: Four original full size 14 inch hubcaps from my 1964 Dodge Polara 4 door sedan, LeRoar. They are decent driver quality. All are slightly dented around the outer edge probably from installing over the years. Two are very good and the other two are reasonable with a small dent nearer the middle. See photos. -- click on photo to enlarge -- I would like $100 for all four. Do not be afraid to ask. Call 402 708 3424 or rlkinsley at yahoo.com (May 6, 2013)

1964 Dodge Dart grill for sale. $125. In Houston, Texas. Price does not include actual shipping charge. Gary H. contact Gary (October 4, 2013)

Driver side front fender stainless trim from 1964 Plymouth Belvedere for sale. 4 door Belvedere. In Houston, Texas. $20 (plus shipping) contact Gary. (October 4, 2013)

1964 Chrysler parts for sale: instrument cluster, tail lights, parking lights, spare tire hold down, and a few other pieces. Make offer. In Houston, Texas. contact Gary. (October 4, 2013)

2014 --1964 Plymouth parts for sale: Sport Fury rear quarter panel trim, both sides in very nice condition $275. Front bumper guard all mounts are there needs to be rechromed $90. Trunk lid top chrome piece for Fury or Sport Fury $85. Fury front fender spears, several sets in various condition. Fury glove box door $50, Sport Fury glove box door $75, hood chrome spear $85. All items plus shipping. Pictures available, email longroof63 @ aol.com (January 14, 2014)

2014 --1964 Recored radiator 22 inch part number 2445640. $300 plus shipping. Pictures available, email longroof63 @ aol.com

2014 -- For Sale: Delco 335 AM/FM radio for 1964 Plymouth. The radio is in perfect working condition and was refurbished in 2013. The correct knobs are included with the radio. $450.00 (buyer to pay for shipping). Pictures available upon request. Call Don 330.656.1099. (March 19, 2014)

1965 Parts For Sale

Newest ads are at the bottom of each category!

1965 Plymouth horn ring for sale. Driver quality. In Houston, Texas. $25 (plus shipping) contact Gary. (January 1, 2013)

1965 Chrysler Newport - New Yorker - Parts for sale: front and rear bumpers, grille, front lower valance, cowl cover, dash. These parts came off a 1965 Chrysler Newport but the more generic like the bumpers should fit all other 1965 Chrysler models. Note: the rear bumper of a station wagon is different. I believe the bumpers I have are NOT from a station wagon. Buyer please confirm. The front bumper is the same foe all body styles. These parts are in Houston, Texas. Make an offer.contact Gary. Note: Going on 50 years old, the bumpers are not showroom. These are useful for someone who has none -- or got in a wreck and needs to replace the bumpers. Heaven forbid.(January 1, 2013)

For sale: a set of original 426 Hemi Super Stock stainless steel core Packard spark plug wires, dated 4th quarter 1964. Sorry, no coil wire, but includes a nice distributor cap. $1,200. for the set. Email Greg: hpims AT comcast.net See photos (April 4, 2012)

For sale: 1965 Poly wideblock engine w/heads, oilpan gasket, valve cover gaskets, and exhaust manifold for two barrell carb. $300 o/b/o in Wa. state. E-mail me for photos. David brotherskeepersusa AT gmail.com (June 2, 2012)

1965 B-Body dash pad for sale. 7 of 8 upper retainer clips included, also stainless strip located under dash to retain edge of vinyl from left side of instrument panel to glove box door. Original condition, no repairs or dye job. Email for pictures. Has some problems for 47 years old, Usable condition. Will ship parcel post in double thick cardboard box. 5 lbs weight. 71953 Contact Tom 479-394-2847 Trandco1 [AT] juno.com Parts located in Arkansas. (July 12, 2012)

1965 Poly 318 engine for sale, in Seattle area, $300.00 o/b/o. David. brotherskeepersusa AT gmail.com (July 12, 2012)

1965 Dodge Coronet Parts for sale: Coronet Grill, Excellent shape; Tail lights and bezels; Radio trim; Heater Trim and Buttons (defrost, off, heat, cool); Complete Dash Cluster (needs rebuild); Two back up lenses; End Side trim for Coronet; Misc Dash Parts. Pair of Rocker Panel moldings, One is in excellent shape and one is cut in half. $500. for all. Located in Northern Michigan. Call Kevin at 586 557 5569 Leave Message and I will return your call.

For sale: 1965 Plymouth parts. I bought an old 1965 Belvedere II Super Stocker / Bracket Racer and am changing it up. I will have the following for sale:
* 440 Wedge Motor with Edelbrock Heads, Weiand Team G Intake, TRW pistons, Purple Stripe Camshaft, Holley 1050 Dominator, MSD Ignition, Moroso Oil Pan, Hooker Super Comp Headers
* Torqueflite Transmission
* V-8 K-member
The motor was in the car and runs (did several burnouts!!) but it has been sitting and I would not want to sell it like it is so I am going to freshen it up and make sure it is like it should be. Plate Hone, Rings, Bearings, Gaskets at a minimum, valve springs and or lifters if need be.
Not know anything about the Torqueflite other than it worked in forward and reverse.
We are setting this Plymouth up as a Match Race clone and do not need the K-member.
Call or message for more details or photos. Keith Dyer, (940) Three Three Seven-2053 keithdyer at wf dot net -- Wichita Falls Texas area (December 26, 2013)

For sale: 1965 318 poly engine and 727 TorqueFlite with about 1,200 miles on overhaul. Located in Central Illinois. Call 217-899-8139 or e-mail daljones @ mtco . com for more info. (June 15, 2013)

2014 -- 1965 Plymouth B-body glove box door for sale. Pictures available upon request. Allen 330 603.5482 or awm440 @ gmail.com (March 24, 2014)

2014 -Three sets of 1965 B-body Mopar tail lights for sale. A mix of different trim packages. You might be able to make one good set from the 6. Pictures available upon request. Allen 330 603.5482 or awm440 @ gmail.com (March 24, 2014)

2014 - AM Radio for a 1965 Plymouth Satellite for sale. The black knobs are from a different radio. Not sure if it works. Pictures available upon request. Allen 330 603.5482 or awm440 @ gmail.com (March 24, 2014)

2014 For sale: many parts for 1965 Plymouth Belvedere - (I am getting ready for a move and cannot tow my organ donor bank! Help! I can not send them to a rusty grave!) This B-Body has a 273 engine so many parts will work on several models. I would be happy to sell individual parts as well as wholesale quantities and would like to find a holding tank for the remainder of the organs as I will be moving soon and won't be able to tow them with me. Give me a call and share your thoughts, let's talk! The general list includes:

Power Steering Unit
Spare 14 inch Rim
Brake Drums
Water Pump
Heads
2bbl Manifold and Carb
Single Point Distributor
Radiator Fan
Grill
Front Bumpers
Interior Post Panels
Kick Panels
Gas Tank
Sending Unit
Dog Dish Hubcaps
Filler Tube (Gas)
Instrument Panels
Int/Ext Door Handles
Window Cranks
Side Windows
Emblems/Letters
Switches/Guages
Arm Rests
Heater Box
Safety Belts
Harnesses
Parts are in Santa Cruz, CA 95062 -- Call James - 831 334-1881

I also have a perfectly fine specimen of a B-Body couch. Free. It is from a 1965 Belvedere I. I have mounted it on two pieces of wood so the studs threads would be fine for future use. (I stuck 1964 Rambler seats in my car. They fold back to make a bed.) I would be honored if this bench seat would become a couch for somebody's garage as it has been in mine for the last 23 years. It is free, but I might hunt you down in ten years and try to talk you out of it! Call James - 831 334-1881 - in Santa Cruz, CA 95062 (April 8, 2014

2014: For Sale; rear interior panels from a 1965 Dodge Coronet 440 convertible. Very rare maroon in decent shape. One panel has a small chunk missing on the bottom, but will be covered up by the seat, or touch up some fiberglass work. Also a small crack towards the back, which should also be covered from the rear seat back. the other panel is also in good condition, but may have a few small flaws. not rotted. Stored inside my house since 1990. No rips in the arm rests. $500 for the complete pair. greg @classiccarsplus. com (May 15, 2014)

2014 - For sale: 1965 Plymouth Belevedere II hardtop doors. Both doors for sale w/o hardware. Minor rust on driver’s side at the front bottom. $75.00 for both. Michael, finkmichaele @ hotmail.com or 510 792 2942 (Tri cities, east Bay Area California) (July 21, 2014)

2014 - For sale: a set of brand new Legendary 1965 Dodge Coronet 440 convertible interior door and rear quarter panels. They currently sell for $439 for the fronts and $165 for the rears. $300 plus shipping or if prepaid, delivered to the 2014 Mopar Nationals. I can include at N/C the metal uppers needs for the install. The panels are blue. Don. mopar4me @ shentel.net (August 3, 2014)

2014 - For sale: the complete outer stainless steel trim (4 pieces) for a 1965 Dodge Coronet convertible. $200 plus shipping or if prepaid, delivery to the 2014 Mopar Nationals. Don mopar4me @ shentel.net (August 3, 2014)

For sale: the 5 piece trim that goes around the sides of the top and rear top window. $250 for all 5 pieces and if prepaid, delivery to the 2014 Mopar Nationals. Don mopar4me @ shentel.net (August 3, 2014)



Did we help your restoration? Support the 1962 to 1965 Web site with a donation.



Wanted

1962 to 1965 Vehicles Wanted

Wanted: A 1965 Chrysler Newport wagon, factory 4 speed, restored or project. Tony Modra at Fredonia Auto Sales 262 692-3016 (November 29, 2013)

2014 - Wanted: a 1965 Dodge Coronet in the $3,000 dollar range. 2 or 4 door. Would like a driver but I am not holding my breath. I can be reached at either imperial1968 @ outlook.com or 651 230 3244(Minnesota) (July 21, 2014)

Newest ads are at the bottom of each category!


Did we help your restoration? Support the 1962 to 1965 Web site with a donation.


Parts Wanted

Multiple Years Parts Wanted (must apply to 1962 to 1965 Mopars in some way)

Wanted: a crossram set-up for my 1963 Plymouth Savoy 2-door sedan, with 426 street wedge engine, standard heads Please contact me: Marcel van Melis mr4speed AT hotmail.com -- I am located in the Netherlands, Europe. (1-1-2012)

Looking for at least one power window motor. They are all the same from 1962 to 1965, stamped 2001225, rectangle in shape with 2 mount studs and shaft sticking out. Call Russell the tire fryer at 360-907-2215

Wanted: power window regulators, with or without the motors, for 1963-1965 B body 2 door doors, (sedan, hardtop or convertible). Phone Joe Suchy 770.964.4441 (12-1-2012)

WANTED: 12 volt pre 1964 Voltage Regulators with the Forward Look Logo stamped in the cover. Will accept new or used regulators or covers only in restorable condition. Please contact Norm an nbrady@crossramconnection.com Or call Norm at 262 542-2834 (October 29, 2013)

2014 - Wanted Oil Pan R/RB Engine, 1962-1964 B-Body. Call Mark Wilson 203 878 4793 Milford, Ct or usaafb17g @ cs.com (July 20, 2014)

2014 -- Wanted: a tail shaft housing for a 1962 Dodge 440 (383) 727 Torqueflight automatic transmission. racerxwest @ aol.com (January 14, 2014)

Newest ads are at the bottom of each category!

1962 Parts Wanted

Wanted: Taillight Lenses (New, Used, or Reproduction) and Taillight Lens Bezels (Unbroken) for a 1962 Chrysler Newport. Contact Jesse Cotton at Cell: 931-436-5186 E-Mail: cotton29 AT juno.com (January 14, 2012)

Wanted: In dash turn signal switch MOPAR PN: 1971750. For use in a 1962 Chrysler Newport daily driver. Contact Jesse Cotton at Cell: 931-436-5186 E-Mail: cotton29 AT juno.com (January 14, 2012)

Wanted 1962 Dodge Max Wedge T-85, 3 speed manual shift handle (S-shaped) and shift knob (A-corn shaped) Willing to pay finders fee! Contact, Blaine at or 780-619-4088 or blainebilyk At hotmail.com (February 20, 2012)

Wanted: Does anyone have a 1962 Dodge factory air conditioner for sale? Do not need under bonnet [hood] equipment, just all interior parts. werabout AT bigpond.net.au (February 20, 2012)

Parts Wanted 1962-1963-1964: Looking for a Z-bar/torque shaft and frame bracket for a 1962, 1963 or 1964 C-body. karlfromreno@gmail.com (11-8-2012)

Parts wanted: 1962 Dart backup bezel # 2189178 Rh nos or nice for rechrome. Also wanted - moulding package, door lower rear, trim under door handles for 2 door #2298728 Rh and 2298729 Lh. Contact Felix Bert 306-630-5002 Email bert.family AT sasktel.net (11-28-12)

Wanted: a good horn ring for a Polara 500 steering wheel, 1962 Dodge. Contact Dick at shoupr@yahoo.com (12-11-2012)

1962 Plymouth Sport Fury parts wanted: Passenger side trim for the front fender; Driver side wheel trim and small piece that runs up to the bumper; Passenger side rear fender trim that connects to the corner. Sport Fury emblems. Tail Lights. Steering wheel. dapope AT refusematerials.com (3-28-2013)

2014 -- Hello Everyone----I'm looking for a pair of the 1962 B-Body two door 60/40 split front bench seat hinge covers. I think that the ones out of a 1963 two door B-body with the 60/40 front bench seat are the same, but it's been so long that I just can not remember. Please email me at mitzi265 @ hotmail.com if you might be able to help me. Charlie.

Wanted: I need a Front Valence for my 1962 Plymouth. Dan, Cell 205 837.8504 (9-3-2013)

Wanted: I need the chrome trim over the left rear quarter panel for my 1962 Plymouth Sport Fury. It does not have to be perfect, but repairable. It is the last peice of the puzzle after a 15 year restoration. Call Jim at 989 350 5012 or e-mail poj48 @ hotmail.com (9-8-2013)

2014 -- Wanted: a tail shaft housing for a 1962 Dodge 440 (383) 727 Torqueflight automatic transmission. racerxwest @ aol.com (January 14, 2014)

Newest ads are at the bottom of each category!

1963 Parts Wanted

Wanted: 1963 max wedge block (date casting July thru December). Also, I am willing to trade towards a block with a 1964 727 automatic push button transmission with cheetah reverse shift valve body. Contact: georgepanek1975 AT yahoo.com (Replace the AT with @ to contact) March 25, 2012

Wanted: I need a 1963 Dodge b-body station wagon tailgate or tailgate parts. All parts considered. I am in western upstate N.Y. near Rochester. Please call Tim 585 394 1266 or email hennessey_tim AT hotmail.com (September 13, 2012)

Wanted: passenger side taillight lens for a 1963 Dodge 880 Custom. Contact Tom at 924-3928 or 335-9474 (both area code two three one) or email tfrens AT riverview.net (October 28, 2012)

1963 Chrysler 300J/K parts wanted: Looking for cast iron exhaust headers and remote brake booster setup for a 300J or 300K. email me at karlfromreno AT gmail.com (11-8-2012)

Wanted: a hood for my 1963 Dodge B body (330 440 Polara). Phone 519-658-3973 or e-mail csmopars at rogers.com (February 12, 2013)

Parts wanted: Original AM-FM Radio for 1963 Plymouth, believe it is a Delco Model 330? -- Thanks DJ, ph 623-546-2344 (March 26, 2013)

Wanted: 1963 Plymouth Fury rear quarters. mark.riesch AT yahoo.com (July 6, 2013)

Wanted: 2 1963 Plymouth Belvedere Bench Seat Hinge Covers. Call Wally at 480 330 1570 or use YOLOWG @ AOL.COM (August 3, 2013)

Wanted: A complete 1963 Plymouth Sport Fury steering wheel (red first choice)(black second). Contact phone 973 470 9354 and ask for Ken.

Wanted: 1963 Plymouth hood ornament in good used or NOS condition. Contact, mark.riesch@yahoo.com (October 14, 2013)

2014 -- Hello Everyone----I am looking for a pair of the 1962 B-Body two door 60/40 split front bench seat hinge covers. I think that the ones out of a 1963 two door B-body with the 60/40 front bench seat are the same, but it's been so long that I just can not remember. Please email me at mitzi265 @ hotmail.com if you might be able to help me. Charlie.

2014 Wanted: 1963 Plymouth Savoy front and rear bumpers in driver condition. Please contact Jeff by email j.macgill @ tbaytel.net or by phone 807 475 9754 (August 20, 2014)

Newest ads are at the bottom of each category!

1964 Parts Wanted

Wanted for a 1964 Dodge 440 station wagon. Looking for:
Clean tailgate (440 wagon only)
Rear bumper guards (steps) (330 wagon or 440 wagon, maybe Plymouth)
Backup lights (330 wagon or 440 wagon, maybe Plymouth)
RH rear quarter panel curved trim (hockey stick shape) (330 wagon or 440 wagon)
All four doors (no cancer) (440 only)
Front right fender (no cancer) (440 only)
LH and RH C trim for fenders (440 only)
Front bumper guards (330 440 or Polara)
Outer headlight C trim (330 440 or Polara)
Hood edge trim (330 440 or Polara)
I also need a B-body 10.5 inch bellhousing for a 383. Any leads would be appreciated! My email is bitethebullet421 AT gmail.com
(June 2, 2012)

Wanted: A low ratio 8 3/4 dropout pumpkin for a 1964 Plymouth B-Body. I am willing to trade a 1964 8 3/4 dropout pumpkin in a ratio 3.23 in excellent condiction straight across in the same excellent condition for a 8 3/4 dropout pumpkin in a ratio of 2.76 or lower. I have heard of them being as low as 2.40s but it is hearsay! Plymouthcurt at yahoo dot com or rollenthunderperformance at yahoo dot com or call 1- 909-240-1822 Ask for Curt. (November 17, 2011, revised January 1, 2012)

Wanted: the interior chrome pieces around the front and rear window and along the roof for a 1964 Plymouth Sport Fury. Greg, phone 304 532 1802 (December 6, 2011, revised January 1, 2012)

Wanted: 1964 Plymouth sedan/post door panel cores - need good metal uppers. Contact Chuck at phone 772-249-4095 or 64_savoy at comcast.net (February 8, 2012)

Wanted: AM FM radio model 335 Delco (1964 Plymouth, and other years?). John 951 202 0699 (July 12, 2012)

Wanted for a 1964 Dodge 440 station wagon. Looking for: Clean tailgate (440 wagon only); Rear bumper guards (steps) (330 wagon or 440 wagon, maybe Plymouth); All four doors (no cancer) (440 only). Any leads would be appreciated! My email is bitethebullet421 AT gmail.com (November 14, 2013)

Parts Wanted for 1964 Dodge 880 station wagon: need gas cap, good speedometer cable and housing driver quality contact jimmymcnabb AT bellsouth.net or 423-623-1225 evenings E,S.T. (11-28-12)

Wanted:Looking for a 1964 dodge Polara right front fender chrome molding. Not pitted Contact Al 847 624-5880 alanfrisch @ hotmail.com (11-24-2013)

Wanted to buy for my 1964 Plymouth Valiant Signet Hdtp: Hood with center trim piece intact; body spears for the right front door and 1/4 panel; 1964 Fury or Sport Fury hubcaps; power steering conversion parts and the rear armrests. Call Kurt in Glendale, AZ at 623606-1313 or e-mail kurtcar2 at cox.net (November 29, 2013)

2014 - Wanted: Original steel wheels for a 1964 Plymouth, Dodge, or Chrysler station wagon. Wheel size 14x6.5 inch. Call Don 330.656.1099. (March 19, 2014)

2014 - Wanted: The two 1964 Dart GT emblems for rear quarters, like shown in this photo. 703 / 532 -- 2076, Jerry. (May 31, 2014)

2014 - Wanted: All brackets and pulleys for mounting A/C in/on a 1964 Plymouth Valiant Signet 2 Door Hard Top (A body) 225 cu. in. (6 cylinder) Bill. billm1021 @ yahoo.com or 770 833 2124 phone (August 3, 2014)

Newest ads are at the bottom of each category!

1965 Parts Wanted

Wanted: front and rear bumpers for a 1965 Dodge Monaco, front signal lights for 1965 Dodge Monaco, call Ron at (905) 932-5070 or email Ron at recs AT live.ca (June 30, 2012)

Wanted in NOS or good used condition to use as a sample to try and get a reproduction made:
* Park light lenses for 1965 Dodge Coronet
JoeSuchy64 AT gmail.com (Replace the AT with @ to contact) or phone 770.964.4441. (September7, 2011, revised January 1, 2012)

Parts Wanted for a 1965 Dodge Dart GT: I am looking for front and rear Dutra Dual dual exhaust manifold for 225 L6 engine. Modified stock rear manifold section is acceptable as part of dual exhaust set-up. Contact Michael via Email: pierson_michael AT bah.com or call Cell (757) 340 3494. Located in Fredericksburg, VA. (April 8, 2012)

Parts wanted for a 1965 Plymouth Belvedere II 2 door hard top: driver side rear quarter side trim. Contact Kent at nelson9024 AT charter.net (October 23, 2012)

Wanted: 1965 727 Torqueflite big block transmission. I need a unit with pushbutton cable operation and splined slip yoke output (not ball and trunion driveshaft flange). Call George at 302 988 1485, please leave message, or e-mail georgemaxlear @ yahoo , com - Located in Southern Delaware. (June 16, 2013)

WANTED: Quarters (right and left ) for a 1965 Dodge Polara 2 door hardtop. martyp1234 at comcast.net (July 21, 2013)

Wanted for 1965 Dodge Coronet: Dodge letters D O D G E for the rear deck lid. Must be in good condition and pit free. Please call Norm at 262 542 2834 or email nbrady@crossramconnection.com (October 20, 2013)

Parts wanted 1965 Dodge Coronet 500: wheel lip mouldings. contact Dave 814-742-7703 or e - mail garageman800@ aol.com (November 13, 2013)

Newest ads are at the bottom of each category!


Miscellaneous 1962 to 1965 Mopar Related Stuff Wanted

Wanted: AM FM radio model 335 Delco (1964 Plymouth, and other years?). John 951 202 0699 (July 21, 2012)

WANTED: 12 volt pre 1964 Voltage Regulators with the Forward Look Logo stamped in the cover. Will accept new or used regulators or covers only in restorable condition. Please contact Norm at nbrady@crossramconnection.com Or call 262 542-2834 (October 29, 2013)

How to Post an Ad.     Newest ads are at the bottom of each category!     How to Post an Ad.


This version of the 2014 Swap Meet was uploaded on August 20, 2014


18,584 folks virtually walked through the original 1962 - 1965 Mopar Web Site Swap Meet from November 22, 1997 through August 18, 1999. The counter later reset from 33080 to 0, then the counter host company went to belly up, dot bomb status. Oh well, anyway, LOTS of people have virtually browsed the 1962 to 1965 Mopar swap meet tables since put on the Web on August 18, 1999.

Want the opportunity to communicate with those who share your 1962 to 1965 Mopar preferences?
Check out the 1962 - 1962 Mopar Mail List Clubhouse for more details.




NOTE: These listings are placed here as is and as received. BE CAREFUL! Do your best to confirm the person actually has the item to sell before any money changes hands! Do not buy if you are not positive! Remember C.O.D. is an option, too. In any case, in the U.S.A. use a postal money order to pay for the item, and send payment by U.S. Mail. While we assume no liability for these listings, we want to help people maintain and restore 1962 to 1965 Mopars. Buyer beware is a good motto to remember in any Web transaction!


Please contact the advertiser to verify the accuracy of the information contained in these ads. The advertisers and the 1962 to 1965 Mopar Web Site expressly disclaim any and all liability for typographical errors, mistakes or misprints.

Go back to the 1962 to 1965 Mopar Web Site Home Page.