'62-'65 Mopars, based on early '60's Mopar Logo

Suggestions! Buying these using the Amazon link below helps support this Web site! THANKS!


How to Super Tune DVD graphic
How to Super Tune!
Performance Engine Building
and Carburetor Tuning
This DVD is great for the first time engine builder/novice but is geared towards the person that knows how to install a crank, rods, pistons, and knows how to torque down a cylinder head correctly, but wants to take their engine building to the next level....
Cost is $29.95 plus shipping. Email Wayne Smothers at afxplymouth (at) sbcglobal (dot) net to buy the DVD. Use 62-65 DVD in the subject line.



Did we help your restoration? Support the 1962 to 1965 Web site with a donation.



The 1962 to 1965 Mopar Swap Meet -- 2011 Ads
VEHICLES FOR SALE PARTS FOR SALE VEHICLES WANTED PARTS WANTED


How to Post an Ad.    Newest ads are at the bottom of each category!     How to Post an Ad.

Did we help your restoration? Support the 1962 to 1965 Web site with a donation.

NOTE: ALL 2011 ads were archived on January 1, 2012.
Resubmit your 2011 ad if you want it relisted.

SCAM ALERT! — If the deal sounds fishy, it probably is!
Beware! View how to protect yourself at the Swap Meet Scam Warning!


Did we help your restoration? Support the 1962 to 1965 Web site with a donation.


How to Post an Ad.    Newest ads are at the bottom of each category!      How to Post an Ad on the Swap Meet.

For Sale

Vehicles For Sale

1962 Vehicles For Sale

NOTE: ALL 2011 ads were archived on January 1, 2012. Resubmit your old ad if you want it relisted.
View the 2011 archived ads.

Newest ads are at the bottom of each category!

1963 Vehicles For Sale

1963 Plymouth Sport Fury for sale. Roller! No engine or transmission. Originally a Golden Commando 383, 727. Solid frame rails,trunk floor and exts. Has all the original interior, Black and copper buckets, nice console! Original am radio, Glass is all good, along with most of the stainless trim. Missing the trunk piece. Needs drs. floor pan, Hood, Decklid, Grill and front bumper and brackets. Drs.door, the cowl, and rockers, frt.fenders are all solid! Car is sold on a Bill Of Sale (no title). Get new title through Broadway Title Service! Too many projects,and not enough time! The car is located in the St.Louis, Mo. area. I have pictures I can email you if interested! Asking price is $2700.00 without the good sheetmetal and $3200.00 with it. classic.moparnospamlive.com -- replace nospam with @ (1/1/2012)

1963 Plymouth Fury Convertible for sale. Viper Red exterior with red and white interior. 440 ci with a 727 Push Button automatic, 2.76 gears for great gas mileage. Ground up restoration several years ago, including new interior. No expense was spared in restoring this fine convertible. Front and rear bumpers and bumperettes rechromed, new repo tail light bezels, all the stainless has been polished, and many nos parts installed. Awesome engine compartment detailed with chrome and polished accessories. This is one beautiful convertible. The car is located in Conneaut Lake, Pa. Contact Tom by phone 814 382 9066 or email: theburbs AT zoominternet.net if you have any questions. Contact me for pictures. Price $75,000.00 No Trades please! (January 1, 2012)

1963 Plymouth Sport Fury for sale. White 2 door, Red interior. started to take apart to restore. Have ALL parts, this was a driven vehicle. My brother purchased from original owner in California. 63,000 mile, 361 commando with typewriter shift. Car has rust in rear quarters behind wheel wells, and one rust spot on cowl. Floor solid, trunk sound. Have factory service manuals and fender tags. I have owned this for 12 years. Life has made me change my priorities, my loss is someone's gain. I am in Kodiak Alaska, probably $1500.00 to ship to Seattle Washington, so I will talk a reasonable price to a serious buyer. 907-539-7072 cell (please note time zones, 4 hours behind east coast.) (January 8, 2012)

For Sale 1963 Plymouth Belvedere 4 Door. This was a Texas Generals estate car. Great for restoration, everything there: 318 Mini Hemi Poly motor, 727 Trans, 8 3/4 rear end. Very very solid car and clean on the underside too. Contact me for pictures. $3800.00 plus shipping. Gary in Titusville Florida. lawride AT bellsouth.net (January 23, 2012)

NOTE: ALL 2011 ads were archived on January 1, 2012. Resubmit your old ad if you want it relisted.
View the 2011 archived ads.

Newest ads are at the bottom of each category!

1964 Vehicles For Sale

1964 Dart for sale. It has a 1966 318 Poly block modified to fit 360 J heads, forged crank, balanced and blueprinted, J and E custom made pistons (333 cu. in.), Eagle rods, Mopar performance 557 lift 292 duration cam, Crane-Gold race roller rockers 1.5 ratio, 360 J heads ported and polished, Weiand tunnel ram intake w/ 2 600 Holleys, fluid damper, 904 tranny w/ low first and second, Cheetah manual reverse valve body, high performance clutch and band pak, Moser axles, Richmond 4.88 gears, sub-frame connectors, fully tubbed, drag shocks and Weld racing wheels. We also changed out the front end with a 1972 Dart to beef it up for the V8, and for the disc brakes. Then the rear end is out of a 1968 Cuda. The Dart is not a show car but it is pretty nice. The Mopar also has custom-made upholstery. Still needs a little T.L.C. The Dart was not built for strictly racing because around here (in Kingman, Az. about a half hour east of Laughlin) the car is streetable. If I were going to race it I would probably switch out the manifold and carbs. I do have over $20,000 in the Dodge but have had some medical bills and just need the money, so I will sacrifice the Dodge for $8,500. See the 1964 Dart photos and the phone number to contact the owner.

A nice 1964 Dodge Polara for sale. It has a rebuilt 383 P/B with 2x4 600 cfm Edelbrock new carbs. The interior is new, front tires new, trans 727 new rebuilt exhaust with Flowmasters new from heads to rear with 2.5 pipe. New rubber on front and rear and side windows with new door rubber. New front disc brakes and new rear wheel cyl. It is a new paint job, but not a good one. Asking $10,000 for it. Get contact info and see pictures here. (February 20, 2012)

For sale: 1964 Dodge Polara 500 2 door / Torquise Blue.

I purchased this Polara 500 with the intent to restore it as it is a very nice So. Calif. example. This car has no rust! Originally sold new in San Diego, CA. 1 outside original repaint. Already installed seat covers and new carpet. 383 2bbl carb, comes with original 4 bbl intake, 727 Torque flight trans installed and also comes with the original, rebuilt/upgraded rear end, new door and rear inside interior panels, new A/C hoses, much more! Best offer over $7995.00. Car is in: Anaheim, CA. Click to see an online photo album. Call (714)-926-7004 or Email Joe with questions at: mrokrasa AT earthlink.net
(May 8, 2012)

NOTE: ALL 2011 ads were archived on January 1, 2012. Resubmit your old ad if you want it relisted.
View the 2011 archived ads.

Newest ads are at the bottom of each category!

1965 Vehicles For Sale

NOTE: ALL 2011 ads were archived on January 1, 2012. Resubmit your old ad if you want it relisted.
View the 2011 archived ads.

1965 Dodge Coronet 500 for sale. 361 w/Carter 4bbl, 727 auto. Runs and drives. Bucket seats, console, solid body. Great restoration project. Original light gold w/light gold interior now black on black. Needs complete restoration. Included is all trim, extra bumpers, extra trim parts, extra dash and parts, and 1969 383 HP engine. Drivetrain has never been apart. Unsure of mileage but roughly 110,000 miles. I have too many projects and I want to see this one go to a good home. Contact Rick at phone (336)362-1292 or email Four40dodge AT aol.com Car is just outside of Greensboro, NC. (December 3, 2011 - Relisted January 1, 2012)

For sale is my wife’s 1965 Dodge Coronet 500 The car is an original South Carolina car which was parked since the mid 1970’s when I purchased it around 2004 in Gaffney SC. It is a factory air car with the poly 318 engine in it; the original engine was shot which was the reason the car was parked. I installed a 1965 318 from a Fury 1 I had which is a 43k mile original one owner engine that runs like new with plenty of power; it has the original transmission and 3 core radiator with shroud and the car will idle in traffic all day in the middle of summer and never climb up past cool on the gauge; the car has a all new Legendary interior including carpet and headliner; still need to get the visors redone and has a single stage driver paint job in the original color, ee1 metallic blue which was the first repaint and a really sharp color all the factory panels in place and as rust-free car as I have seen; no rust period. It has Mopar 14 inch Ralleye wheels on it with almost new Michelin tires, all new brakes, shocks, etc. and I rolled Herculiner bed liner to the interior floor pans and firewall along with Hushmat and sprayed inside doors and 1/4s with undercoating for sound deadening and insulation. I replaced all weatherstripping, car is quiet and a pleasure to drive. I have completely redone this car from top to bottom. The bottom of the car was never undercoated from the factory so you can see how clean and sweet the bottom is; it’s blue with some South Carolina red dirt still under there, only minor touches needed to be a top end car. Needs a new heat a/c switch, it stays on heat, I was gonna get switch rebuilt but have not got around to it; also speedometer needle jumps around which just needs graphite lube in cable; the factory radio speaker is shot; the bumpers are painted with Eastwood’s liquid chrome which looks good but would need to be chromed to be correct; the exhaust is in need of a redo with some flexpipe and mismatched mufflers on it: driveable but needs really to be replaced. The reason for selling is I have a rare Charger that needs restored and I need to get some cash together. I don’t want to get rid of it as this body style has been a favorite of mine since childhood. I have a Fury that I am the second owner of and I can’t bring myself to sell it, besides the wife has only put 200 miles on the car the last 2 summers, she would rather drive her new 300, woman! And she likes the hemi orange Charger. This Coronet is a real sweet car; the a/c worked till I pulled it apart for resto and lost the freon; it needs a charge and it will work once switch is rebuilt. All the major stuff done just needs a few of the easy minor touches done and you will have a excellent 1965 Dodge Coronet 500 in ee1 blue with factory air -- don’t get much better than that. This would be a perfect car for the mechanically limited as it is in cruise night shape now; it gets thumbs up every time we take her out, and you could tinker with it while taking it to cruise ins and have the satisfaction that you did some of the work to it as not every one has the ability and shop to redo a classic Mopar from start to finish 716-706-8714 Joe call with any questions you may have and I can email pics on request. Car is located just south of Buffalo NY and I would not hesitate to take a cross country trip in this car. Asking $10,500.00 which is close to what I have in the car. We can store the car till spring if needed as we just put her up for winter hibernation. (December 13, 2011, Relisted January 1, 2012)

1965 Plymouth Satellite
For sale: 1965 383 Plymouth Satellite. California car. Solid body; needs interior. Has new brakes drums and master and new carb. Proceeds go to the Hub Society we are taking 7 students to Indy for the 500 in May and this car needs to go. $5900 clean title ready to go. James Long (530)575-1616 (May 8, 2012)

Newest ads are at the bottom of each category!



Did we help your restoration? Support the 1962 to 1965 Web site with a donation.



Parts For Sale

Multiple Years Parts For Sale

NOTE: ALL 2011 ads were archived on January 1, 2012. Resubmit your old ad if you want it relisted.
View the 2011 archived ads.


Newest ads are at the bottom of each category!

Mopar DECALS for sale: “If ya can’t find it...make it!” So I did. The “Valiant” decal was factory installed on early-production 1960 Valiants (sometimes on the valve cover, sometimes on the air cleaner—see below), but obviously goes great on a Valiant of any year. The “Mopar Parts” decal with the Forward Look artwork is for pre-1964 cars. The air cleaner and coolant decals are for Canadian cars (“Chryco” instead of “Mopar”). I am super happy with how they came out; quality is awesome. The pics below are low-resolution (72dpi) scans; the actual decals have no jaggy effect to the text or artwork. They are printed on (and with) woodstove-grade high-temp materials; they will last for many years no matter what; they are not cheap junk suitable only for trailer queens that never get started or driven. $5/ea plus minimal postage. Contact Dan Stern at Contact Dan

CHRYCO air cleaner decal Chryco antifreeze decal Genuine Mopar Parts decal Plymouth Valiant decal


new OE turn signal switches
New OE turn signal switches for 1962 - 1963 and 1964 -1966 A B and C body Mopars without tilt steering.


New Reproduction Mopar Parts For Sale from Joe Suchy. (Prices subject to change)
Joe suchy business card

Unit Item /  Description

$39.00 set 1962-1965 “B” body battery tray w/support bracket

$70.00 each Battery tray - Max Wedge trunk mount

$50.00 kit Hold down kit for the trunk mount battery

$0.75 each Battery tray hold down bolts (5/16-18 thread w/pointed tip)

$18.00 each 1960-1965 All bodies, Battery Hold Down

$12.00 set 1962-1969 Battery hold down J-bolts w/wing nuts

$26.00 set 1966-1969 “A” and “B” body Battery hold down and “J” bolt combo

$12.00 set 1970-up? Battery hold down J-bolts w/hex nuts

$125.00 each 1962-1965 “B” Positive battery cable (90 degree or straight end)

$30.00 each 1962-1965 “B” Negative batter cable (90 degree or straight end)

$48.00 set Big block alternator bracket, bolts, and spacers

$15.00 set Big block alternator bolt and spacer package

$55.00 kit 1962-1968 “B” Metal fan shroud brackets, nuts, and bolts

$245.00 each 1962-1968 “B” Metal fan shroud - 2 pieces

$7.00 each Radiator overflow hose (specify 19 inch, 22 inch or 26 inch radiator)

$20.00 each Radiator cap, 14 pound, 1960-1966 all models MADE IN USA

$85.00 each Correct early push on chrome valve cover breather cap (OIL)

$26.00 each PVC valve, 90 degree metal used w/slide on metal cap

$45.00 each 1965“B” and 1965-1969  “A” Windshield washer reservoir (Will work on 1964 “B”)

$0.75 each  Windshield washer reservoir screws with sems washer

$35.00 each 1959-1966 Electric windshield washer pump

$5.00 each “F” Connector - windshield washer hose

$18.00 each 1963-1969 Engine to firewall ground strap (Hemi, Big and Small block)

$35.00 each 1956-1972 Ballast resistor w/screw - all bodies

$15.00 each 1961-1965 Starter relay--Specify auto. or manual transmission

$10.00 each 1962-1970 Horn relay

$12.00 each 1965-UP? Fusible link

$13.00 each 1969-down Black engine harness 8 prong plug

$8.00 each Dimmer switch 1959-1980 cars and 1959-1989 trucks

$5.00 each 1960-1969 All-Door jamb switch/courtesy light

$60.00 each 1963-1974 “A” and 1962-1970 “B” Instrument voltage limiter (solid state)

$20.00 each 1963-1974 “A” and 1962-70 “B” Instrument voltage limiter (like original)

$75.00 each Quartz clock kit-1963 Dodge, 1964-1970 “B” dash clock only

$200.00	each Tachometer - 1964 Plymouth - Replaces clock or clock delete (looks factory)	

$75.00 each 1964-1965 Mopar “B” body reconditioned speaker	

$15.00 each Ignition lock tumbler w/keys-1948-1968 cars and 1961-1972 trucks

$30.00 set Ignition lock tumbler and door locks w/keys – 1966-1968 Cars

$30.00 each Ignition switch wo/lock tumbler 1960-1968 cars

$20.00 each Trunk lock w/keys, retainer clip, asst. shafts - 1962-1972 cars

$39.00 each Console lid/glove box door lock

$60.00 each 1962-1966 Turn signal switch

$10.00 each 1962-1966 Turn signal canceling cam

$0.50 each 1962-1965-Horn ring to switch insulator bushing

$0.30 each Screws for horn ring insulator bushings

$28.00 each 1962-1990 Steering column ball bearing

$5.00 each 1960-1969 heater hose strap (soft aluminum)

$15.00 set 1964-1969 big block/hemi-heater hose nipple kit (two 5/8 hoses)

$10.00 kit 1962-1969 big block “Corbin” hose clamp kit

$11.00 kit 1962-1969 small block “Corbin” hose clamp kit

$70.00 set 1966-1967 Big block Spark plug wire loom kit

$75.00 set 1962-1965 Big block and Max Wedge Spark plug wire loom kit

$12.00 each Big block #7 Spark plug wire heat shield

$12.00 each Big block #6 and  #8 Spark plug wire heat shield

$7.00 each 3/8-24 Exhaust manifold sleeve nuts (1.94 inch and 2.84 inch)

$15.00 each heater control cables

$80.00 each 1962-1965 “B” Throttle cables (Specify year,make, engine)

$99.00 kit 1962-1965 “B” Big Block 4 BBL, Throttle cable bracket, return spring & bracket

$225.00 each 1962-1965 Shift cables

$205.00 each 1962-1965 Park cables

$99.00 each 1962-1965 Speedometer cables

$2.50 each 1962-1965 “A” and “B” body two prong plastic wiring harness retainer

$1.00 each 3 inch plastic wiring harness retainer (fenderwell and core support)

$1.25 each 5 inch plastic wiring harness retainer (fenderwell and core support)

$15.00 pair Max Wedge and Hemi w.Carter AFBs cross ram throttle return springs

$250.00 each Max Wedge and Hemi alternator pulley

$195.00 kit Max Wedge dual choke cable assembly

$35.00 set Max Wedge exhaust manifold gaskets

$35.00 set Max Wedge exhaust manifold nuts

$195.00	each Max Wedge dual choke cable assembly
					
$60.00 each Max Wedge engine oil dipstick, and tube w/mounting bracket
 
$145.00 each Max Wedge transmission dipstick and tube w/mounting bracket
 
$75.00 each Max Wedge master cylinder heat shield					[ADD]	

$40.00 pair Lightweight Hood springs- 1962-1972“B” and 1970-1974 “E”

$45.00 each 1964 Dodge parking light lens w/gasket

$59.00 each 1963 Plymouth parking light lens w/gasket

$4.00 each 1963 Plymouth parking light lens gasket

$50.00 pair 1963 Plymouth parking light bezel to body gasket

$0.50 each 1963 Plymouth parking light lens screws-stainless steel

$0.50 each 1964 Plymouth parking light lens screws-stainless steel

$59.00 pair 1965 and 1967 Plymouth “B” parking light lenses w/gaskets

$195.00	pair 1963-1965 Plymouth back-up light lens/bezel assembly w/gaskets	

$30.00 each 1963-1965 Plymouth back-up light lenses

$5.00 each 1963-1965 Plymouth back-up light lens gasket

$15.00 set 1963-1965 Plymouth back-up light lens and bezel gasket set

$50.00 pair 1963-1965 Plymouth license plate lenses w/gaskets

$4.00 each 1963-1965 Plymouth license plate lens gasket

$8.00 pair 1963 and 1965 Plymouth “B” body tail light bezel to body seal - all models

$225.00 pair 1963 Dodge 330 and 440 Tail light lenses

$390.00 pair 1963 Dodge 330/440 Tail light bezels

$38.00 pair 1963 Dodge 330/440 Tail light bezel to body gaskets

$76.00 each 1963 Dodge Polara/Polara 500 tail light lens w/gaskets

$490.00 pair 1963 Plymouth Tail light bezels

$5.00 each 1963 Plymouth foam gaskets for tail light assemblies

$56.00 each 1964 Dodge tail light lens w/gasket

$56.00 each 1964 Dodge Polara / Polara 500 back-up lens w/gasket

$65.00 each 1964 Dodge tail light lens bezel

$1.00 each 1964 Dodge tail light lens to bezel gasket

$18.00 pair 1964 Polara/Polara 500 tail panel to body seal

$12.00 pair 1964 Ploara/Polara 500 foam tail panel to body gaskets

$10.00 set (4) 1964 Dodge 330/440 tail light bezel to body seal (rubber bead-replacement)

$15.00 each 1964 Dodge 330/440 tail light bezel to body seal (rubber pad like original)

$490.00 pair 1964 Plymouth Tail light bezels

$50.00 each 1964 Plymouth Savoy and Belvedere tail light lens wo/chrome

$225.00 pair 1964 Savoy and Belvedere Tail light lenses

$225.00 pair 1964 Fury and Sport Fury tail light lenses

$10.00 pair 1964 Plymouth tail light lens to bezel gasket

$15.00 pair 1964 Plymouth tail light bezel to body seal--except station wagon

$5.00 each 1964 Plymouth foam gasket for tail light assembly-- except station wagon

$8.00 pair 1964 Plymouth tail light bezel to body seal --station wagon

$2.50 each 1962-1965 “B” body sta. wag. tail gate bezel seal-window mechanism

$490.00 pair 1965 Coronet and Coronet 440 Tail light bezels

$90.00 each 1965 Coronet and Coronet 440 tail light lens w/gasket

$225.00 pair 1965 Coronet and Coronet 440 tail light lenses

$38.00 pair 1965 Coronet and Coronet 440 Tail light bezel to body gaskets

$10.00 set 1965 Coronet foam tail light gaskets (two large and two small)

$490.00 pair 1965 Coronet 500 tail light bezels

$190.00 pair 1965 Coronet 500 tail light assembly top bezel

$76.00 each 1965 Coronet 500 tail light lens w/chrome

$490.00 pair 1965 Belvedere/Satellite tail light bezels

$80.00 each 1965 Belvedere II /Satellite tail light lens w/gasket, wo/chrome trim

$195.00 pair 1965 Belvedere II /Satellite tail light lens w/gasket, w/chrome trim

$5.00 each 1965 Plymouth foam gaskets for tail light assembly

$10.00 pair 1965-1970 “B” body console lens

$40.00 each 1963-1964 “B” console and 1957-up convertible rear panel courtesy light lens and bezel assembly  

$23.00 pair some 1964, 1965-1966 “B” body and some “C” body sail panel courtesy lens

$20.00 each Aluminum trim rings for the above sail panel courtesy lenses   

$15.00 each 1965-1966 “C” body dome light lens

$8.00 each fuel sending unit socks - 5/16 or 3/8

$2.00 each fuel sending unit gasket

$8.00 each fuel sending unit lock ring (galvanized)

$12.00 each fuel sending unit lock ring (stainless)

$18.00 each fuel sending lock ring wrench

$8.00 each fuel sending unit float (brass)

$10.00 each fuel tank grommet (nitrile) 1967-1974 “A”, 1964-1969 “B”, 1971-1974 “B” bodies

$3.00 each fuel filler neck “O” ring, original 1962-1963 “B” body fuel tank

$15.00 each fuel filler neck grommet, 1963 – 1966 “A” body

$15.00 each fuel tank “J”-bolt w/nut

$98.00 each 1962-1965 “B” Fuel sending unit (5/16)

$98.00 each 1962-1965 “B” Fuel sending unit (3/8)

$10/$14 each Sending unit ground strap (steel or stainless steel)

$165.00 each 1962 - 1965 “B” body gas tanks (made in Canada by OE manufacturer)

$30.00/$70.00 each 1962-1965 “B” gas tank strap (galvanized or stainless steel)

$5.00 each 1962-1965 “B” and 1963-1966 “A” Oval plastic firewall plug

$8.00 each firewall drain flap

$9.00 each 1964-UP? grommet-firewall/speed-o-meter cable

$8.00 each grommet-firewall/heater core

$27.00 each grommet-firewall/push button shifter and park cables

$25.00 each grommet-firewall plate to steering column jacket

$15.00 each grommet-firewall/emergency brake cable

$25.00 kit 1962-1965 “B” body-firewall seal kit

$10.00 kit 1963-1966 “A” and 1962-1965 “B” windshield wiper pivot seal kit

$30.00 kit 1962-1965 “B” body - firewall insulation kit

$8.00 each 1962-1965 “B” body - heater delete insulation pad

$15.00 kit 1962-1965 “B” body-kick panel insulation

$10.00 kit 1962-1965 “B” Heater box insulation (2 pcs)

$25.00 each 1962-1965 “B” Hood insulation (1/2 inch thick flat - not molded)

$2.00 each 1960-1965 Hood insulation clip

$38.00 kit 1962-1965 “B” body plug kit

$30.00 each 1962-1965 “B” core support to hood seal (small)

$40.00 each 1962-1965 “B” core support to hood seal (large)

$30.00 each 1962-1965 “B” cowl to hood seal

$40.00 each 1963-1965 Plymouth tailpanel seal

$40.00 each 1962-1965 “B” station wagon tail panel seal

$35.00 set 1965 Coronet tail panel seal (where applicable)

$75.00 pair 1963-1965 Dodge “B” Fillers-rear bumper corner to quarter panel

$16.00 set L/R 1963 Dodge splash shield seal front fender front shield

$16.00 set L/R 1963 Plymouth splash shield seal front fender front shield

$18.00 set L/R 1964 Dodge splash shield seal front fender front shield

$22.00 set L/R 1964 Plymouth splash shield seal front fender front shield

$16.00 set L/R 1965 Plymouth splash shield seal front fender front shield

$16.00 set L/R 1965 Coronet splash shield seal front fender front shield

$26.00 set L/R 1963-1965 “B” body splash shield seals, front fender, rear shield (specify year and make)

$175.00 pair 1963-1965 Dodge/Plymouth “B” body, front fender, rear splash shields

$29.00 pair 1962-1965 “B” Covers-Inner fender “A” frame adjust access holes

$8.00 pair 1962-1965 “B” body seal-hangs on frame between core support and K-frame

$10.00 pair 1962-1965 “B” body seal-covers hole where brake line goes through inner fender

$10.00 pair 1962-1965 “B” body seal-covers hole where frame, firwall, and floor meet

$6.00 each 1962-1965 “B” seal-starter shield w/staples

$135.00 each 1962-1966 “A” and “B” body two post outside mirror (the “correct” reproduction)

$27.00 each two post mirror repair kit (mirror, spring, lock ring, gasket, and screws)

$10.00 each two post mirror gasket/screw package

$135.00 pair 1963-1966 “A” body outside door handles w/hardware and gaskets (Mostly USA)

$135.00 pair 1962-1965 “B” body outside door handles w/hardware and gaskets (Mostly USA)

$135.00 pair 1966-1967 “B” body outside door handles w/hardware and gaskets (Mostly USA)

$75.00 pair 1967 1/2-1971 Truck outside door handles w/hardware and gaskets (Mostly USA)

$10.00 set outside door handle gaskets, 1963-1966 “A”, 1962-1965 “B”, and 1967 1/2-1971 truck

$10.00 set outside door handle gaskets, 1966-1967 “B”

$2.00 each 1962-1965 door lock gaskets

$15.00 each 1962-1965 “B” body door hinge spring	

$5.00 each 1962-1965 “B” body door hinge roller

$2.00 each 1962-up? trunk lock and 1966-up? door lock gaskets

$2.00 each 1962-up? trunk lock and 1966-up? door lock retainer clip

$6./$5. pair 1962-1974 interior door lock button-chrome or black (can be painted)

$6.00 pair Grommet for interior door lock buttons

$50.00 pair 1963-1966 “A”, “B”, and “C” body inside door handles

$40.00 pair 1963-1966 “A”, “B”, and “C” body window cranks (3 inch, 4 inch and 6 inch)

$1.00 each Internal wrenching hex screw for above door handles and window cranks

$1.00 each Black wear washers for above door handles and window cranks

$39/$75 ea/pair Ash tray 1964-1966 “A” and “B” rear arm rest/1967-1969 “A” convertible side panel

$60/$70 pair 1964-1966 “A”&“C”/ 1964-1965“B” arm rest pad-Black/colors

$80/$85 pair 1964-1966 “A”&“C”/ 1964-1965 “B” arm rest bases-chrome

$195.00 each 1963 Plymouth instrument cluster bezel pad

$0.75 each 1962-1974 window regulator to channel retaining washer (4 internal prongs)

$150.00 each 1962-1965 “B” body radio antenna

$4.00 each 1962-1965 “B” body radio antenna gasket

$115.00 each 1964-1965 “B” body radio delete plates-Metal like original

$35.00 each 1962-1966 “A” and “B” body steering column to shaft seal

$15.00 kit steering knuckle repair kit (seal in this kit is red)

$12.00 each steering knuckle seal only, black in color

$245.00 each 1964 “B” Steering wheel – black (Belvedere, Fury, Dodge 440, and Polara)

$255.00 each 1964 “B” Steering wheel – red or tan (Belvedere, Fury, Dodge 440, and Polara)

$245.00 each 1965-1966 “B” Steering wheel - two spoke - black

$255.00 each 1965-1966 “B” Steering wheel - two spoke - red or tan

$20.00 each clutch fork boot

$40.00 each 1962-1965 “B”, 1963-1971 “C” Firewall clutch rod boot (NOS)

$19.00 each 1962-1965 “B”, 1963-1971 “C” Firewall clutch rod boot (reproduction)

$5.00 each 1963-up?  most bodies-clutch pedal upstop (rubber)

$5.00 pair Nylon bushings for z-bar (two pair per z-bar)

$7.00 each Wire retainer clip for z-bar nylon bushings

$5.50 each rubber grease seal-ball to z-bar (two per z-bar)

$2.00 each Nylon wear washers-clutch linkage (three per car)

$3.00 each Spring clip-clutch linkage (three per car)

$85.00 each 1963-1965 “B” body shifter boot console and non-console

$85.00 each 1963-1965 “B” body chrome shifter boot bezel non console

$85.00 each 1963-1965 “B” body 4-speed under carpet seal

$160.00 each 1963-1965 “B” body 4-speed floor hump (metal like original)

$95.00 each 1964-1965 “B” and “C” body fiberglass 4-sp console hump

$169.00 each 1963-1965 “B” body 4-speed crossmember

$26.00 pair Torsion bar seals and retainer clips “A”, “B”, and “E”

$39.00 each 1962-1965 Large boot (most V-8s)-ball and trunnion driveshaft w/clamps

$420.00 pair 1964 Dodge “C” shaped fender headlight surrounds

$140.00 pair 1964 Dodge - Teardrop Triad for top of front fender

$40.00 each 1963 “Fury” fender script

$40.00 each 1963-1966  “Sport Fury” script

$40.00 each 1963-1964 Savoy “Plymouth” front fender script

$95.00 set 1963-1964 “B” Zinc die cast “PLYMOUTH” hood/trunk letters
 
$95.00 set 1965 “B” Zinc die cast “PLYMOUTH” hood/trunk letters

$10.00 each Pentastar

$75.00 each 1964 Plymouth “NOS” hood ornament, 6 cyl. and small block

$425.00 each 1964 Plymouth hood ornament big block

$60.00 pair 1964 Plymouth hood ornament decals-correct anodized alum.-383 and 426

$325.00 each 1964 Dodge trunk emblem

$275.00 each 1965 Coronet and Coronet “500” trunk emblem/bezel

$15.00 each 1962-1965 Most “B” body glove box

$22.00 each 1963 Plymouth glove box

$40.00 pair 1964-1967 “B” body bench seat hinge covers (black or white only)

$119.00 pair 1964-1967 “B” body bench seat hinge covers (chrome)

$2.00 each Nut- front seat hold down

$17.00 pair 1962-1965 stops -2 door seat back (plastic cup)

$320.00 pair 1963-1966 “A” and 1964-1965 “B” bodies-Convertible top latch mechanism

$70.00 pair 1963-1966 “A” and 1963-1965 “B” bodies-Convertible top guide pin (stainless)

$12.00 pair 1962-1970 “A”, “B” and “C” bodies convertible top pin socket (plastic)

$30.00 set 1963-1971 “A”,“B”,“C”,& “E” Convertible door alignment wedges w/screws

$0.50 each convertible top boot snap studs w/screw

$4.00 set 1964-1965 “B” convertible sun visor screws (4 countersunk and 2 round head)

$475.00 pair Pot metal, top of quarter panel belt trim,  1964 Plymouth and 1965 Belvedere II convertible

$19.00 pair 1962-1965 Plastic sun visor tips

$100.00 pair 1962-1965 Sunvisors - several colors

$60.00 each 1962-1965 “B” body - accelerator pedal

$5.00 set 1962-1965 “B” body - accelerator pedal pivot gasket and grommet set

$15.00 each 1962-1966 “A” and 1962-1965 “B” body clutch and brake pedal pads (manual trans)

$25.00 each 1962-1966 “A” and 1962-1965 “B” body brake pedal pad (auto trans)

$12.00 each 1963-1965 “A” and “B” body emergency brake pedal pad

$50.00 set 1962-1965 “B” body big block engine mount brackets

$20.00 each Late 1962-1965 “B” body motor mounts

$150.00 pair Late 1962-1965 “B” Poly Lock motor mounts

$99.00 each 1963-1965 “B” Poly transmission mount (Specify Auto/Manual)

$99.00 each 1962-1965 “B” Poly trans adapter mount for use w/ late model torquefite

$4.00 each 1962-1963 Plymouth and Dodge wedge shaped bumper-fender/hood (2/car)

$4.00 each 1964 Plymouth wedge shaped bumper - fender/hood (2/car)

$2.50 each 1965 Plymouth and Dodge wedge shaped bumper - fender/hood (4/car)

$2.00 each round rubber bumper - fender/hood at rear corners (2/car)

$1.50 each round rubber bumper - hood adjust, wo/stud

$3.00 each round rubber bumper - hood adust, w/stud

$2.00 each round rubber bumper - license plate mounting frame

$2.00 each 1962-1969 rubber door bumper (2/door) specify year

$2.00 each 1962-1967 “B” and 1967-1971 “A” trunk bumper

$0.50 each Glove box bumpers

$1.00 each Ash tray bumpers

$0.50 each 1965 and earlier license plate screw/nut combo

$1.50 each plastic snap in license plate nut

$1.50 each fast twist license plate screw-used with plastic nut above

$125.00 each 1962-1965 “B” body windshield gasket (specify year, make, model)

$125.00 each 1962-1965 “B” body rear window gasket (specify year, make, model)

$250.00 pair 1962-1965 “B” body station wagon quarter window gasket w/lock strip

$22.00 set 1962-1965 “B” body windshield reveal moulding clip/screw package

$26.00 set 1962 “B” body rear window reveal moulding clip/screw package

$15.00 set 1963 “B” body rear window reveal noulding screw package

$22.00 set 1964-1965 “B” body sedan rear window moulding clip/screw package

$22.00 set 1964-1965 “B” body hardtop rear window moulding clip/screw package

$0.10 each Wheel lip and some windshield moulding screws

ea Side and Rocker moulding clips for some of the 1962-1966 Mopars

$22.00 kit 1964-1965 Dodge “B” Belt line moulding clips

$0.20 each 10-24 flange nut for moulding clips

$1.00 each folded sheetmetal acorn nut for ends of door side mouldings

$0.15 each stamped steel thread cutting nuts for moulding clips and script (1/8, 5.32, 3/16)

$0.30 each tube nuts- for script w/1/8 stub and 3/16 hole in the body

$0.50 each 10-24 thread “U” type foldover nut

$55.00 pair 1963-1966 “A” /1962-1965“B” body vent window frame to “A” pillar seal

$160.00 pair 1964-1965 “B” vent window triangle seal - 2dr HT and Convertible

$185.00	pair 1962-1965 “B” vent window triangle seal – 2dr and 4dr Sedans Made in USA

$10.00 set 1962-1965 “B” body vent window bottom trim gasket (1 set/car)

$20.00 each 1962-1965 “B” Support bracket-Bottom of vent channel to bottom of door  

$19.00 pair 1962-1965 “B” body-Plastic tip for vent window handles

$90./$95. set 1962-1965 “B” body window felts (specify year, make, and model)

$45.00 set 1962-1965 “B” body station wagon tail gate window felt

$30.00 each 1962-1965 “B” body station wagon lower tail gate seal

$8.00 set 1962-1965 “B” body station wagon window channel liner

$70.00 set Station wagon roof rack rubber pads and strips, most bodies 1962-1966 MDE IN USA

$70.00 set 1962-1965 “B”' body sedan-window channel run

$3.00 foot 1962-1965 “B” body vent window channel liner (7 foot sedan and 11 foot hard top and convertible)

$85.00 each 1962-1965 “B” body convertible header seal

$45.00 set 1962 “B” body convertible roof rail seals

$90.00 set 1963-1965 “B” body convertible roof rail seals

$2.00 each Grommet - Convertible top pump mounting

$70.00 pair 1963-1965 “B” body-roof rail seals-2 and 4 door hardtop

Carpet by Trim Parts for 1962 to 1965 Mopars - (specify year, make, and model)

$55.00 pair “U” shaped seal on “B” pillar; 1962-1965 “B” body 2dr HT and Convertible

$1.00 each Nickel plated plug buttons, latch side of doors, 2 per door, 1962-1965 “B” body

$16.00 set 1962-1964 “B” body 4dr H.T. “B” pillar vertical weatherstripping

$5.00 foot 1962-1965 Windlace - specify body style and color

$8.75 pair 1962-1965 Compact windlace-Used around quarter window on 2dr. sedan

$10.00 each 1964-1965 Compact windlace-used on rear window-2dr/4dr sdn and 4dr HT

$245.00 set 1962-1965 “B” body inner sill plates only

$320.00 set 1963-1965 “B” body inner and outer sill plates

$20.00 each 1963-1970 “B” body trunk seal

$32.00 each 1962 “B” body trunk seal

$30.00 pair 1963-1965 Plymouth /1962-1965 Dodge “B” trunk well extension covers

$15.00 each 1962-1965 “B” body seat back/trunk divider

$585.00 each 1962-1965 “B” Mopar Trunk floor pan

$210.00 Pair 1962-1965 “B” Trunk floor extensions

$180.00	each 1963-1965 “B” Plymouth, rear lower quarter panel patch, wheel well to bumper 

$95.00 each 1963-1965 “B” Moulded trunk mats

$585.00 each 1962-1965 “B” Complete one piece floor pan w/e-brake cable brackets

$145.00 each 1962-1965 Plymouth, 1962 and 1965 Dodge “B” rear foot pans-2 pcs-L&R ($285. for both)

$145.00 each 1963-1964 Dodge “B” rear foot pans-2 pcs-L&R ($285. for both)

$20.00 each 1962-1965 “B” Support bracket - Bottom of vent channel to bottom of door

$8.00 pair 1962 “B” body, seal-front edge of quarter glass for HT and Conv. (not flocked)

$20.00 pair 1963-1970 “B” body, seal-front edge of quarter glass for HT and Conv. (flocked)

$45/$75 pair 1964-1966 “B”body 727 transmission lines - original material / Stainless steel

$65/$75 set 1962-1965 “B” body Engine compartment 3 brake line kit - OM or S/S

$29/$37 set 1962-1965 “B” body Rear Axle 2 brake line kit - OM or S/S

$5.00 each 1966-up? plastic bushing for trans. shift linkage

$65.00 set 1964-1965 “B” body 3 piece brake line set (engine compartment)

$10.00 set Axle adjust lock pawl/flanged nut-for 8 3/4 right axle

$1.25 each Lug nut 1/2-20 x 3/4 Hex RH

$1.50 each Lug nut 1/2-20 x 3/4 Hex LH

$2.25 each Bumper bolts -  7/16 Complete with washers and a nut 

$1.25 each Bumper bolt-1/4 w/nut (For 1962-1965 “B” Station Wagon back-up lights)	

$38.00 pair 1963-1965 Plymouth and 1963 Dodge “Teardrop” shaped bumper guard pad only

$195.00 pair 1963-1965 Plymouth rear bumper guards w/pads

$20.00 set Leaf spring shackle bushings (set of 8)

$20.00 set Leaf spring “U” bolts w/tall nuts, for 3 inch housing (8 1/4, 8 3/4, Dana 60, etc.) 

$245.00 each 1962-1965 “B” body Windshields – Clear or Tinted

$10.00 each 1962-1974 “B” and 1970-1974 “E” spare tire hold down wing nut

$30.00 each 1962-1965 “B” Spare tire hold down hook MADE IN USA

$7.00 each “K” frame bolts  MADE IN USA  

$1.00 each Oil pan bolts MADE IN USA 

$1.00 each Crank pulley bolts, 3/4 inch or 7/8 inch long MADE IN USA  

$0.60 each Heater box firewall nuts  MADE IN USA  

$1.50 each Educated nut, spindle cotter pin MADE IN USA
 
$1.25 each Valve cover hold down studs MADE IN USA 

$1.50 each Valve cover hold down nuts MADE IN USA

$30.00 each 1962-1970 “A” and “B” body, Main exhaust hanger, 1 7/8 inch and 2 1/4 inch MADE IN USA

$30.00 each 1962-1965 “B” body, Tail pipe hanger MADE IN USA

$10.00 each 1962-1965 2 1/4 inch tail pipe clamp, use with above hanger	MADE IN USA

$17.00 each 1962-1965 2 inch tail pipe clamp, use with above hanger MADE IN USA

0.40 each Wave washer, emergency brake lever to brake shoe MADE IN USA

$12.00 each 1962-1964 Push button, park lever overcenter spring	MADE IN USA

$14.00 each 8 ounces, Z-alt oil supplement, replaces zinc omitted from oil

$225.00 each 1963-1964 Plymouth stainless steel trunk trim (except 1964 Belvedere)

$15.00 each Bee Hive hood pop-up springs, most 1963-1966 “A”, “B”, “C” and Imperial

$5.00 each Decals – Air cleaner, anti-freeze, battery booster, jack instruction, 426. as-is no warranty -  MADE IN USA

$4.00 each Decal – Jack base, Convertible top lift pump fluid -  MADE IN USA

$15.00 pair Decal - Max wedge valve covers -  MADE IN USA

$7.00 each Decal – AirTemp window sticker - MADE IN USA

$10.00 pair Windshield wiper arm tension spring, 1962-1964 “B”, probably “A” and “C” - MADE IN USA

$25/$45	each 1962-1965 “B” body, package tray -  MADE IN USA
		
$12.00	each 1962-1965 “B” body package tray jute - MADE IN USA

$85.00	each 1962-1965 Headliners - MADE IN USA

$20.00	each 1962-1965 Headliner insulation - MADE IN USA

$12.00	each 1962-1965 Fuel tank pad - - MADE IN USA	   


(Prices subject to change) revised 4-3-2012

Tons of used parts for the 1962-1965 “B” bodies for sale

Coming Soon:

1965 “B” body Dodge filler-rear bumper corners to quarter panel

1963-1965 Big Block Mopar valve covers and breathers; (the 6 bolt version that started in mid-1963)

1963-1965 Plymouth – Major quarter panel patch panel

1963-1965 Plymouth “B” body, Outer wheel house

1964 Plymouth dash pads

1964-1965 Dodge dash pads			

Tag light lens, most 1961-1965 Dodge, Chrysler, Imperial

 
Joe Suchy also has tons of used parts for the 1962 to 1965 B bodies!
Contact Joe Suchy in Fairburn, GA  JoeSuchy64 AT gmail.com (Replace the AT with @ to contact.)
or phone 770.964.4441. Tell Joe that Gary H. from the 1962 to 1965 Mopar Web site says hello!

Joe suchy business card

Joe Suchy Mopar Parts For Sale as of 1-18-2012  (Prices subject to change) 

Charlie 65Satelliteman’s 1962 to 1965 Mopar Restoration Services and Parts For Sale:
* Steering wheel restoration to high point scoring quality.
* Armrest sets completely restored for all of the 1962, 1963, 1964 and 1965
A, B and C body Mopars to like, or better than new, condition in some instances.
* High quality replacement grill emblems for the 1965 Belvedere I, 1965 Belvedere II,
1965 Plymouth Satellite, 1965 Plymouth Fury I-II-III and 1965 Sport Fury.
(Usually all of the five models of grill emblems made go on Ebay with a
starting bid price of $130.00 including free priority mail shipping in the continental USA.
International shipping is available.)
* 1965 Dodge Coronet 440 and 500 rear trunk emblem inserts for sale
* 1962 Plymouth Savoy, Belvedere, Fury and Sport Fury hood and trunk emblem inserts now for sale.

Charlie has thousands of nice rare parts for early B-bodies that he will be selling
off due age and health issues. Most of the parts are for the 1965 Plymouth Belvedere
and Satellite models, but there are still quite a few out in the warehouse for
the other B bodies as well.

Phone Charlie (65Satelliteman) week nights, only between 6pm to 9pm eastern time,
with any questions or parts inquiries at 989-362-8463 or
email mitzi265 NOSPAM hotmail.com (Replace the NOSPAM with @ to email Charlie. (January 1, 2012)

Dodge and Plymouth rear tailgate station wagon glass for sale. Came out of 1963 or 1964 Mopar Dodge and Plymouth 'B' body station wagon. Decent driver quality. In Houston, Texas. $25 (plus shipping) (January 1, 2012) contact Gary

For sale: Two motor mount brackets, two new insulators, and a set of bolts and nuts for the the same. Fits 1964 BB Bodies. Also 1963 and 1965. (1962 I am uncertain.) George bt6t4 AT yahoo.com (May 8, 2012)


Specific Years Parts For Sale

1962 Parts For Sale

NOTE: ALL 2011 ads were archived on January 1, 2012. Resubmit your old ad if you want it relisted.
View the 2011 archived ads.

Newest ads are at the bottom of each category!

1963 Parts For Sale

NOTE: ALL 2011 ads were archived on January 1, 2012. Resubmit your old ad if you want it relisted.
View the 2011 archived ads.

Newest ads are at the bottom of each category!

1964 Parts For Sale

NOTE: ALL 2011 ads were archived on January 1, 2012. Resubmit your old ad if you want it relisted.
View the 2011 archived ads.

Newest ads are at the bottom of each category!

1964 Dodge Dart grill for sale $125. In Houston, Texas. Price does not include actual shipping charge. Gary H. contact Gary (January 1, 2012)

1964 Plymouth doors for sale, With glass. Came off a 1964 Plymouth 4 door Belvedere. Doors are complete with glass but no door panels. Parts are in Houston, Texas. Make offer. (plus shipping) contact Gary.

Driver side front fender stainless trim from 1964 Plymouth Belvedere for sale. 4 door Belvedere. In Houston, Texas. $20 (plus shipping) contact Gary. (January 1, 2012)

1964 Plymouth Belvedere steering wheel for sale; wheel has typical cracks and sun shrinkage and needs restoration; $25 plus shipping. In Houston, Texas. contact Gary. (January 1, 2012)

1964 Chrysler parts for sale: instrument cluster, tail lights, parking lights, spare tire hold down, and a few other pieces. Make offer. In Houston, Texas. contact Gary. (January 1, 2012)

1964 Plymouth Belvedere trim for sale. Complete set of 1964 Plymouth Belvedere 2 door side trim in good condition. The passenger side spear needs a small repair on the very tip. Price $150.00. If interested I can send photos. The parts are in Princeton, In. Email w.sporeATinsightbb.com or call cell 812-677-1677. (December 13, 2011, revised January 1, 2012)

For sale: Set of new bumper bolts, nuts, and washers still in original plastic. Fits my 1964 Dodge Polara. 12 total. 6 front, 6 rear. George bt6t4 AT yahoo.com (May 8, 2012)

1965 Parts For Sale

NOTE: ALL 2011 ads were archived on January 1, 2012. Resubmit your old ad if you want it relisted.
View the 2011 archived ads.

Newest ads are at the bottom of each category!

1965 Plymouth horn ring for sale. Driver quality. In Houston, Texas. $25 (plus shipping) contact Gary. (January 1, 2011)

1965 Chrysler Parts for sale: front and rear bumpers, grille, front lower valance, cowl cover, dash. These parts came off a 1965 Chrysler Newport but the more generic like the bumpers should fit all other 1965 Chrysler models. Parts are in Houston, Texas. Make an offer.contact Gary. (January 1, 2011)

For sale: Complete setup of fiberglass parts for 1965 Dodge Coronet AWB AFX. I have the hood scoop, hood, deck lid, altered fenders, doors, dash. All parts bought from Sled City Fiberglass. I also have front and rear fiberglass bumpers but do not know who made them. $1750 In Tulsa Oklahoma. Contact Howard @ 918-346-3448 hdmopar AT att.net. (February 2, 2012)

For sale: NOS Ventshades C-58 Stainless steel 4 piece set for 1965 4 door sedans: Chrysler Newport, New Yorker and Dodge Polara and Custom $80. Jim 409-927-1280 or moparponcik At aol.com (March 2012)

For sale: NOS Ventshades C-50 Stainless steel 4 piece set for 1965-1966: 4 door sedans Plymouth Belvedere Series and Dodge Coronet Series $80. Jim 409-927-1280 or moparponcik At aol.com (March 2012)

For sale: a set of original 426 Hemi Super Stock stainless steel core Packard spark plug wires, dated 4th quarter 1964. Sorry, no coil wire, but includes a nice distributor cap. $1,200. for the set. Email Greg: hpims AT comcast.net See photos (April 4, 2012)



Did we help your restoration? Support the 1962 to 1965 Web site with a donation.



Wanted

1962 to 1965 Vehicles Wanted

NOTE: ALL 2011 ads were archived on January 1, 2012. Resubmit your old ad if you want it relisted.
View the 2011 archived ads.

Newest ads are at the bottom of each category!


Did we help your restoration? Support the 1962 to 1965 Web site with a donation.


Parts Wanted

Multiple Years Parts Wanted (must apply to 1962 to 1965 Mopars in some way)

Wanted: a crossram set-up for my 1963 Plymouth Savoy 2-door sedan, with 426 street wedge engine, standard heads Please contact me: Marcel van Melis mr4speed AT hotmail.com -- I am located in the Netherlands, Europe. (1-1-2012)

Looking for at least one power window motor. They are all the same from 1962 to 1965, stamped 2001225, rectangle in shape with 2 mount studs and shaft sticking out. Call Russell the tire fryer at 360-907-2215

NOTE: ALL 2011 ads were archived on January 1, 2012. Resubmit your old ad if you want it relisted.
View the 2011 archived ads.

Newest ads are at the bottom of each category!

1962 Parts Wanted

Wanted: Taillight Lenses (New, Used, or Reproduction) and Taillight Lens Bezels (Unbroken) for a 1962 Chrysler Newport. Contact Jesse Cotton at Cell: 931-436-5186 E-Mail: cotton29 AT juno.com (January 14, 2012)

Wanted: In dash turn signal switch MOPAR PN: 1971750. For use in a 1962 Chrysler Newport daily driver. Contact Jesse Cotton at Cell: 931-436-5186 E-Mail: cotton29 AT juno.com (January 14, 2012)

NOTE: ALL 2011 ads were archived on January 1, 2012. Resubmit your old ad if you want it relisted.
View the 2011 archived ads.

Wanted 1962 Dodge Max Wedge T-85, 3 speed manual shift handle (S-shaped) and shift knob (A-corn shaped) Willing to pay finders fee! Contact, Blaine at or 780-619-4088 or blainebilyk At hotmail.com (February 20, 2012)

Newest ads are at the bottom of each category!

1963 Parts Wanted

NOTE: ALL 2011 ads were archived on January 1, 2012. Resubmit your old ad if you want it relisted.
View the 2011 archived ads.

Wanted: 1963 max wedge block (date casting July thru December). Also, I am willing to trade towards a block with a 1964 727 automatic push button transmision with cheetah reverse shift valve body. Contact: georgepanek1975 AT yahoo.com (Replace the AT with @ to contact) March 25, 2012

Newest ads are at the bottom of each category!

1964 Parts Wanted

NOTE: ALL 2011 ads were archived on January 1, 2012. Resubmit your old ad if you want it relisted.
View the 2011 archived ads.

Wanted: A low ratio 8 3/4 dropout pumpkin for a 1964 Plymouth B-Body. I am willing to trade a 1964 8 3/4 dropout pumpkin in a ratio 3.23 in excellent condiction straight across in the same excellent condition for a 8 3/4 dropout pumpkin in a ratio of 2.76 or lower. I have heard of them being as low as 2.40s but it is hearsay! Plymouthcurt at yahoo dot com or rollenthunderperformance at yahoo dot com or call 1- 909-240-1822 Ask for Curt. (November 17, 2011, revised January 1, 2012)

Wanted: the interior chrome pieces around the front and rear window and along the roof for a 1964 Plymouth Sport Fury. Greg, phone 304 532 1802 (December 6, 2011, revised January 1, 2012)

Wanted: 1964 Plymouth sedan/post door panel cores - need good metal uppers. Contact Chuck at phone 772-249-4095 or 64_savoy at comcast.net (February 8, 2012)

Wanted: Does anyone have a 1962 Dodge factory air conditioner for sale? Do not need under bonnet [hood] equipment, just all interior parts. werabout AT bigpond.net.au (February 20, 2012)

Newest ads are at the bottom of each category!

1965 Parts Wanted

NOTE: ALL 2011 ads were archived on January 1, 2012. Resubmit your old ad if you want it relisted.
View the 2011 archived ads.

Wanted in NOS or good used condition to use as a sample to try and get a reproduction made:
* Park light lenses for 1965 Dodge Coronet
JoeSuchy64 AT gmail.com (Replace the AT with @ to contact) or phone 770.964.4441. (September7, 2011, revised January 1, 2012)

Parts Wanted for a 1965 Dodge Dart GT: I am looking for front and rear Dutra Dual dual exhaust manifold for 225 L6 engine. Modified stock rear manifold section is acceptable as part of dual exhaust set-up. Contact Michael via Email: pierson_michael AT bah.com or call Cell (757) 340 3494. Located in Fredericksburg, VA. (April 8, 2012)

Newest ads are at the bottom of each category!


Miscellaneous 1962 to 1965 Mopar Related Stuff Wanted

NOTE: ALL 2011 ads were archived on January 9, 2011. Resubmit your old ad if you want it relisted.
View the 2011 archived ads.

How to Post an Ad.     Newest ads are at the bottom of each category!     How to Post an Ad.


This version of the 2012 Swap Meet was uploaded on May 8, 2012


18,584 folks virtually walked through the original 1962 - 1965 Mopar Web Site Swap Meet from November 22, 1997 through August 18, 1999. The counter later reset from 33080 to 0, then the counter host company went to belly up, dot bomb status. Oh well, anyway, LOTS of people have virtually browsed the 1962 to 1965 Mopar swap meet tables since put on the Web on August 18, 1999.

Want the opportunity to communicate with those who share your 1962 to 1965 Mopar preferences?
Check out the 1962 - 1962 Mopar Mail List Clubhouse for more details.




NOTE: These listings are placed here as is and as received. BE CAREFUL! Do your best to confirm the person actually has the item to sell before any money changes hands! Do not buy if you are not positive! Remember C.O.D. is an option, too. In any case, in the U.S.A. use a postal money order to pay for the item, and send payment by U.S. Mail. While we assume no liability for these listings, we want to help people maintain and restore 1962 to 1965 Mopars. Buyer beware is a good motto to remember in any Web transaction!


Please contact the advertiser to verify the accuracy of the information contained in these ads. The advertisers and the 1962 to 1965 Mopar Web Site expressly disclaim any and all liability for typographical errors, mistakes or misprints.

Go back to the 1962 to 1965 Mopar Web Site Home Page.