'62-'65 Mopars, based on early '60's Mopar Logo

Suggestions! Buying these using the Amazon link below helps support this Web site! THANKS!





The 1962 to 1965 Mopar Swap Meet -- 2010 Ads
VEHICLES FOR SALE PARTS FOR SALE VEHICLES WANTED PARTS WANTED


How to Post an Ad.    Newest ads are at the bottom of each category!     How to Post an Ad.



Did we help your restoration? Support the 1962 to 1965 Web site with a donation.


NOTE: ALL 2009 ads were archived on January 1, 2010.
Resubmit your 2009 ad if you want it relisted. Temporary access to the 2009 ads is here.

SCAM ALERT! — If the deal sounds fishy, it probably is!
Beware! View how to protect yourself at the Swap Meet Scam Warning!




Did we help your restoration? Support the 1962 to 1965 Web site with a donation.




How to Post an Ad.    Newest ads are at the bottom of each category!      How to Post an Ad on the Swap Meet.

For Sale

Vehicles For Sale

1962 Vehicles For Sale

1962 Plymouth Sport Fury convertible for sale with factory 413 Max Wedge Golden Commando option. This car is the only known survivor of the 13 Max Wedge Sport Fury convertibles built in 1962. It has a Red exterior, Black/Red interior, and White convertible top. Fully restored to Concours condition; it was judged 1st place Early B-Body at the Mopar Nationals the first time it was shown. It is the best Max Wedge restoration anywhere, featuring all matching body numbers, and date code correct mechanical parts. Engine, transmission, rear end, carbs, distributor, and radiator are all correct casting/stamping numbers and date code correct. It has all of the correct Max Wedge engine accessories, wiring, exhaust, brake lines, right down to the correct speedometer pinion adapter.
The Sport Fury is a rustfree, Western car with full documentation back to the original owner in Missoula, Montana. Purchased new at Troy Motors in Harlowton, Montana, it was street driven in Missoula, and raced on occasional weekends in Spokane, WA, until the owner moved to California. He moved back to Montana in 1964, where the car remained until 1995. Because it was not seriously raced, it was never caged or tubbed, cut up or wrecked like so many of the sedans. The restoration was completed in 2000 using all NOS or restored original parts. Full decoding and inspected by Galen, Darrell Davis authentication, and title history from Montana completely authenticate this truly rare and unusual car.
This is a striking example of the Exner design coupled to the raw, gut wrenching power of the Max Wedge. What was highly coveted and desirable then, is even more so today. Asking $195,000.00. Partial trade considered for early Hemi or Max Wedge project cars. Contact Joe at 715 355-5593 See pictures here. (January 1, 2010).

1962 Plymouth Belvedere, 9 passenger, station wagon for sale. 318 Poly engine, 727 tranny, floors completed, mint front fenders, excellent bezels and lenses, very liitle work to be completed on quarters, gas tank excellent, available 3x2 manifold and carbs, engine to be rebuilt. Cop wheels available, engine bay excellent, frame excellent; I look forward to hearing from Mopar people. Bill -- patricia136 NOSPAM sympatico.ca (Replace the NOSPAM with @ to contact. January 17, 2010)

NOTE: ALL 2009 ads were archived on January 1, 2010. Resubmit your old ad if you want it relisted.
Newest ads are at the bottom of each category!

1963 Vehicles For Sale

1963 Dodge Polara 500 convertible for sale: original 426/425HP Max Wedge Ramcharger. 1963 was the zenith year of the Max Wedge, and while the true racers were snapping up the 2 door sedans, a few well heeled guys opted for stealth street racing. How else do you explain that 3 people in the whole country ordered a 500 convertible, and then checked the boxes for 13.5CR/425HP and 4.56 gears? This black Dodge sports a Red 500 stripe, Black/Red bucket seat interior, black top, and all the 500 trim. An encounter with this car in 1963 had to be a Beauty and the Beast experience depending on the brand you were driving. Sold new in Virginia, it eventually made it's way out to California, and then back to Nebraska, before being discovered by Galen Govier in Ron Slobe's project collection. Galen authenticated the car and then traced it's history back to California. Having just minor rust, it had never been caged, tubbed, or wrecked like so many of the sedans. It was treated to a full Concours restoration in 2006. Already having the matching body numbers and fender tag, all of the correct, date coded mechanical parts were located to bring it back as a numbers matching car. It has the correct date coded HC engine block, intake, heads, carbs, and distributor. Radiator, pulleys, wiring, brake lines, oil pan, exhaust manifolds, exhaust system, choke cable and brackets are all original Max Wedge parts. It is one of the finest examples of a Max Wedge and was invited to the prestigious Meadow Brook Concours in 2007. Sure to attract attention anywhere with it's good looks, it really draws a crowd when the engine fires up. It would be very difficult to find another car as rare, featuring a high quality restoration for the value price of $200,000.00. Partial trade considered for early Hemi or Max Wedge project cars. See photos Contact Joe at 715 355-5593. (January 1, 2010)

1963 Dodge Polara Convertable for sale. Complete, restorable. $3200.00 478.279.2307 or skafouse NOSPAM yahoo.com (Replace the NOSPAM with @ to contact. January 22, 2010)



1963 Chrysler 300 convertible for sale. Original numbers 383, 2bbl, auto, p/s, p/b, a/c, bucket seats, console. Needs total restoration, BAD floorpans, rough drivers quarter, very complete, engine turns free, untouched original underhood, clear title. I suspect this may be 1 of 1861 1963 Indy 500 Chrysler Pacesetter edition cars. Asking $2250. Contact Dale Kuehn 979-218-4409 Car is located in Shreveport La. (February 15, 2010)

NOTE: ALL 2009 ads were archived on January 1, 2010. Resubmit your old ad if you want it relisted.
Newest ads are at the bottom of each category!

1964 Vehicles For Sale

NOTE: ALL 2009 ads were archived on January 1, 2010. Resubmit your old ad if you want it relisted.
Newest ads are at the bottom of each category!


1964 Dodge Polara 500 for sale. Asking $14,500. About $20,000 invested, including purchase price. A daily driver, will go all day and all night. This car was originally owned by the webmaster of our beloved 1962-1965 Mopar website. We have two 1964s, so one must go. Completely rebuilt original 383 engine, bored .30, restored in 2005 as a 'Roadrunner' engine with Mopar Performance cam, hi-po manifolds, 4-bbl Holley Street Avenger (650cfm); all-new or rebuilt accessories and components (alternator, radiator, fuel pump, etc). About 15,000 miles on rebuilt engine. Completely refurbished factory air with performance compressor, new lines, new heater core. Power brakes and steering. Front brakes converted to discs; new rear drums and brakes. Suspension and steering completely rebuilt, including box to firm feel. Rebuilt 727 auto transmission. New Legendary interior, including front seats, carpeting and headliner. Bucket seats and console. Hidden CD player and stereo system. New door and window seal kit. Very minor fender rust, second paint job is a 20-footer, chrome in great shape. Cowl rust has been repaired, but heavy rains can result in interior leaks. Chicago, IL. See Photo. View Video. More photos and receipts available. Zack Nauth, 630-235-5595 or laborboy NOSPAM sbcglobal.net (Replace the NOSPAM with @ to contact) January 1, 2010)

For Sale 1964 Dodge 330 4 door. This car runs; all original. Car is solid, good project to restore. Located in Wa. Asking $1500 OBO. Pictures and questions please ask. Gary gew41 NOSAPM yahoo.com (Replace the NOSPAM with @ to contact) January 30, 2010)

1964 Plymouth Belvedere 2 door hardtop for sale. 361, 727, blue on blue;owned for 20 years; great project car, comes with parts car $4500 obo In Southern Virginia. Call John at 434.447.7451 and leave message (March 13, 2010)

1965 Vehicles For Sale


NOTE: ALL 2009 ads were archived on January 1, 2010. Resubmit your old ad if you want it relisted.
Newest ads are at the bottom of each category!


two 1965 Dodge Monaco Mopars for saleTwo 1965 Dodge Monaco Mopars for sale in upstate New York.
These cars are in great shape, straight, all glass good, good motors and trannys, both 2 door hard tops and both 383 ci autos; both have bucket seats and are all original except blue one has Crane cam, Mallory ignition and has been rebuilt, along with tranny; have lots of parts and all paperwork including original delivery sheet and original registration and manuals; tilt wheel and glovebox manual, fender skirts, and many other boxes of parts grilles and dash etc. Too many too list. Call for more info 315.344.6457 -- Must sell due to illness. Contact dougdaniel50 NOSPAM yahoo.com (Replace the NOSPAM with @ to contact the seller. January 1, 2010)

1965 Dodge Coronet two door sedan for sale. If you have always wanted to build or have an A990 clone/tribute/recreation (whichever term you like) now you can. I am not going to claim I can do a car as nice as a Mosher Masterpiece, but you could park this one next to one of his without shame. Started from a rust free Sothern California body, yes, original floor and trunk pans in this baby. Never undercoated. Finished as nice underneath as topside. The list of new parts is too long for this listing. The big stuff: original vintage hemi block (1968) with iron K heads and mag cross ram intake with correct carbs, correct aluminum water pump housing. Many replica parts from Kramer, Harms, Petro, and Ball. Torqflite has been rebuilt with hemi components, rear is fresh 3.55 Suretrac. 5 spoke aluminum front wheels and steel rears. A990 duplicate interior with back seat too. Paint is fresh in original XX Tan. All chrome and stainless restored including dash. Much more but best to contact me for details. This has been a labor of love for the past 5 years and I do not really want to sell (I hear your brain saying yeah right), but my arthritis has gotten bad enough I ca not do the last of the assembly which would be final wiring, plumbing and interior installation. I have all parts except for water pump pulley. I am looking for $42k, well under what is in it. The car is in Las Vegas. Phone me, Bob: 206.369.1123 or Email carbob40 NOSPAM comcast.net (Replace the NOSPAM with @ to contact. January 1, 2010)

1965 Plymouth Satellite Convertible for sale (rare). 383 motor with automatic transmission, both rebuilt 17,000 miles ago. Car has been repainted, Sable Pearl and has new interior and top. Also has new tires. Needs some minor repairs. Car has had two owners. I have had the car since 1970. Car is in Klamath Falls, OR. Pictures on request. Contact Gary Funston 541 882-8750 (February 27, 2010)

1965 Plymouth Belvedere 2 door hardtop for sale. 98% complete, new paint, PPG true blue, Legendary interior, motor and transmission rebuilt, chrome headers and carbs, 2x4's, all interior chrome redone, weather striping, door hinges and exterior handles replaced, new tires, gas tank, exhaust and fuel lines, new steering box, factory ac car. With spare parts. In Atlanta GA. Gary, 404-538-4896 (March 4, 2010)


Did we help your restoration? Support the 1962 to 1965 Web site with a donation.



Parts For Sale

Multiple Years Parts For Sale

NOTE: ALL 2009 ads were archived on January 1, 2010. Resubmit your old ad if you want it relisted.
Newest ads are at the bottom of each category!


New Reproduction Mopar Parts For Sale from Joe Suchy

Unit / Item Description

$33.00 each 1966-1969 'B' body battery tray (will work on 1962-1965, 1 extra hole)

$39.00 set 1962-1965 'B' body battery tray w/support bracket

$70.00 each Battery tray - Max Wedge trunk mount

$20.00 kit Hold down kit for the trunk mount battery

$0.75 each Battery tray hold down bolts (5/16-18 thread w/pointed tip)

$18.00 each 1960-1965 All bodies, Battery Hold Down

$18.00 each 1966-1969 'A' and 'B' body Battery Hold Down

$12.00 set 1962-1969 Battery hold down J-bolts w/wing nuts

$26.00 set 1960-1965 All bodies, Battery hold down and 'J' bolt combo.

$26.00 set 1966-1969 'A' and 'B' body Battery hold down and 'J' bolt combo

$12.00 set 1970-up to ? Battery hold down J-bolts w/hex nuts

$48.00 set Big block alternator bracket, bolts, and spacers

$15.00 set Big block alternator bolt and spacer package

$55.00 kit 1962-1968 'B' Metal fan shroud brackets, nuts, and bolts

$245.00 each 1962-1968 'B' Metal fan shroud - 2 pieces

$20.00 each Replacement early push on valve cover breather cap (Black)

$85.00 each Correct early push on chrome valve cover breather cap (OIL)

$45.00 each 1965 'B' and 1965-1969 'A' Windshield washer reservoir (Will work on
1964 'B')

$25.00 each 1959-1966 Electric windshield washer punp

$5.00 each 'F' Connector - windshield washer hose

$18.00 each 1963-1969 Engine to firewall ground strap (Hemi, Big and Small block)

$35.00 each 1956-1972 Ballast resistor w/screw - all bodies

$15.00 each 1961-1965 Starter relay -- Specify automatic or manual transmission

$12.00 each 1965-up to ? Fusible link

$13.00 each 1969-down Black engine harness 8 prong plug

$8.00 each Dimmer switch 1959-1980 cars and 59-89 trucks

$5.00 each 1960-1969 All-Door jamb switch/courtesy light

$30.00 each 1963-1974 'A' and 1962-1970 'B' Instrument voltage limiter

$75.00 each Quartz clock kit - 1963 Dodge, 1964-70 'B' dash clock only

$200.00 each Tachometer - 1964 Plymouth - Replaces clock or clock delete (looks
factory)

$15.00 each Ignition lock tumbler w/keys - 1948-1968 cars and 1961-1972 trucks

$30.00 each Ignition switch wo/lock tumbler 1960-1968 cars

$20.00 each Trunk lock w/keys, retainer clip, asst. shafts - 1962-1972 cars

$60.00 each 1962-1966 Turn signal switch

$10.00 each 1962-1966 Turn signal canceling cam

$0.50 each 1962-1965 Horn ring to switch insulator bushing

$0.30 each Screws for horn ring insulator bushings

$5.00 each 1960-1969 heater hose strap (soft aluminum)

$15.00 set 1964-1969 big block/hemi-heater hose nipple kit (two 5/8 hoses)

$10.00 kit 1962-1969 big block 'Corbin' hose clamp kit

$11.00 kit 62-69 small block "Corbin" hose clamp kit

$70.00 set 1966-1967 Big block Spark plug wire loom kit

$75.00 set 1962-1965 Big block and Max Wedge Spark plug wire loom kit

$15.00 each heater control cables

$75.00 each 1962-1965 'B' Throttle cables (Specify year, make, engine)

$195.00 each 1962-1965 Shift cables

$175.00 each 1962-1965 Park cables

$99.00 each 1962-1965 Speedometer cables

$2.50 each 1962-1965 'A' and 'B' body two prong plastic wiring harness retainer

$1.00 each 3 inch plastic wiring harness retainer (fenderwell and core support)

$1.25 each 5 inch plastic wiring harness retainer (fenderwell and core support)

$6./$10. ea./pr. Max Wedge cross ram throttle return springs

$6./$10. ea./pr. Hemi cross ram throttle return springs

$250.00 each Max Wedge and Hemi alternator pulley

$195.00 kit Max Wedge dual choke cable assembly

$35.00 set Max Wedge exhaust manifold gaskets

$35.00 set Max Wedge exhaust manifold nuts

$40.00 pair Lightweight Hood springs-1962-1972 'B' and 1970-1974 'E'

$44.00 each 1964 Dodge parking light lens w/gasket

$59.00 each 1963 Plymouth parking light lens w/gasket

$4.00 each 1963 Plymouth parking light lens gasket

$50.00 pair 1963 Plymouth parking light bezel to body gasket

$0.50 each 1963 Plymouth parking light lens screws-stainless steel

$0.50 each 1964 Plymouth parking light lens screws-stainless steel~

$50.00 each 1966 Plymouth 'B' body parking light lenses w/gaskets

$30.00 each 1963-1965 Plymouth back-up light lenses

$5.00 each 1963-1965 Plymouth back-up light lens gasket

$15.00 set 1963-1965 Plymouth back-up light lens and bezel gasket set

$50.00 pair 1963-1965 Plymouth license plate lenses w/gaskets

$4.00 each 1963-1965 Plymouth license plate lens gasket

$8.00 pair 1963 and 1965 Plymouth. 'B' body tail light bezel to body seal -all models

$98.00 each 1963 Dodge 330/440 tail light lens w/gasket

$390.00 pair 1963 Dodge 330/440 Tail light bezels

$38.00 pair 1963 Dodge 330/440 Tail light bezel to body gaskets

$76.00 each 1963 Dodge Polara/Polara 500 tail light lens w/gaskets

$490.00 pair 1963 Plymouth Tail light bezels

$5.00 each 1963 Plymouth foam gaskets for tail light assemblies

$56.00 each 1964 Dodge tail light lens w/gasket

$56.00 each 1964 Polara/Polara 500 back-up lens w/gasket

$65.00 each 1964 Dodge tail light lens bezel

$1.00 each 1964 Dodge tail light lens to bezel gasket

$18.00 pair 1964 Polara/Polara 500 tail panel to body seal

$12.00 pair 1964 Polara / Polara 500 foam tail panel to body gaskets

$10.00 set (4) 1964 Dodge 330/440 tail light bezel to body seal (rubber
bead-replacement)

$15.00 each 1964 Dodge 330/440 tail light bezel to body seal (rubber pad
like orig)

$445.00 pair 1964 Plymouth Tail light bezels

$105.00 each 1964 Plymouth Savoy and Belvedere tail light lens wo/chrome

$10.00 pair 1964 Plymouth tail light lens to bezel gasket

$15.00 pair 1964 Plymouth tail light bezel to body seal-except sta. wagon

$5.00 each 1964 Plymouth foam gasket for tail light assembly-- except station
wagon

$8.00 pair 1964 Plymouth tail light bezel to body seal-sta. wagon

$2.50 each 1962-1965 'B' body sta. wag. tail gate bezel seal-window mechanism

$490.00 pair 1965 Coronet and Coronet 440 Tail light bezels

$98.00 each 1965 Coronet and Coronet 440 tail light lens w/gasket

$38.00 pair 1965 Coronet and Coronet 440 Tail light bezel to body gaskets

$10.00 set 1965 Coronet foam tail light gaskets (two large and two small)

$490.00 pair 1965 Coronet 500 tail light bezels

$190.00 pair 1965 Coronet 500 tail light assembly top bezel

$76.00 each 1965 Coronet 500 tail light lens w/chrome

$490.00 pair 1965 Belvedere/Satellite tail light bezels

$98.00 each 1965 Belvedere I tail light lens w/gasket

$98.00 each 1965 Belvedere II /Satellite tail light lens w/gasket,
wo/chrome trim

$5.00 each 1965 Plymouth foam gaskets for tail light assembly

$10.00 pair 1965-1970 'B' body console lens

$23.00 pair some 1964, 1965-66 'B' body and some 'C' body sail panel courtesy
lens

$15.00 each 1965-66 'C' body dome light lens

$8.00 each fuel sending unit socks-5/16 or 3/8

$2.00 each fuel sending unit gasket

$8.00 each fuel sending unit lock ring (galvanized)

$12.00 each fuel sending unit lock ring (stainless)

$18.00 each fuel sending lock ring wrench

$6.00 each fuel sending unit float (plastic)

$8.00 each fuel sending unit float (brass)

$10.00 each fuel tank grommet (nitrile) 67-74 'A', 64-69 'B', 71-74 'B'
bodies

$15.00 each fuel tank "J"-bolt w/nut

$98.00 each 1962-1965 'B' Fuel sending unit (5/16)

$98.00 each 1962-1965 'B' Fuel sending unit (3/8)

$180.00 each gas tanks (specify year, make and model)

$5.00 each 1962-1965 'B' and 63-66 'A' Oval plastic firewall plug

$8.00 each firewall drain flap

$9.00 each 64-up to ? grommet-firewall/speed-o-meter cable

$8.00 each grommet-firewall/heater core

$27.00 each grommet-firewall/push button shifter and park cables

$25.00 each grommet-firewall plate to steering column jacket

$15.00 each grommet-firewall/emergency brake cable

$25.00 kit 1962-1965 'B' body-firewall seal kit

$10.00 kit 63-66 'A' and 1962-1965 'B' windshield wiper pivot seal kit

$30.00 kit 1962-1965 'B' body - firewall insulation kit

$8.00 each 1962-1965 'B' body - heater delete insulation pad

$15.00 kit 1962-1965 'B' body-kick panel insulation

$10.00 kit 1962-1965 'B' Heater box insulation (2 pcs)

$25.00 each 1963-1965 'B' Hood insulation (1/2" thick flat-not molded)

$2.00 each 60-65 Hood insulation clip

$38.00 kit 1962-1965 'B' body plug kit

$30.00 each 1962-1965 'B' core support to hood seal (small)

$40.00 each 1962-1965 'B' core support to hood seal (large)

$30.00 each 1962-1965 'B' cowl to hood seal

$40.00 each 1963-1965 Plymouth tailpanel seal

$40.00 each 1962-1965 'B' station wagon tail panel seal

$35.00 set 1965 Coronet tail panel seal (where applicable)

$75.00 pair 1963-1964 Dodge 'B' Fillers-rear bumper corner to quarter panel

$16.00 set L/R 1963 Dodge splashshield seal front fender front shield

$16.00 set L/R 1963 Plymouth splashshield seal front fender front shield

$18.00 set L/R 1964 Dodge splashshield seal front fender front shield

$22.00 set L/R 1964 Plymouth splashshield seal front fender front shield

$16.00 set L/R 1965 Plymouth splash shield seal front fender front shield

$16.00 set L/R 1965 Coronet splash shield seal front fender front shield

$26.00 set L/R 1963-1965 'B' body splash shield seals, front fender, rear
shield (specify year and make)

$8.00 pair 1962-1965 'B' body seal-hangs on frame between core support and
K-frame

$10.00 pair 1962-1965 'B' body seal-covers hole where brake line goes
through inner fender

$10.00 pair 1962-1965 'B' body seal-covers hole where frame, firwall, and
floor meet

$5.00 each 1962-1965 'B' seal-starter shield

$125.00 each 1962-1966 'A' and 'B' body two post outside mirror

$27.00 each two post mirror repair kit (mirror, spring, lock ring,
gasket, and screws)

$10.00 each two post mirror gasket/screw package

$160.00 pair 1963-1966 'A' body outside door handles w/hardware and gaskets

$165.00 pair 1962-1965 'B' body outside door handles w/hardware and gaskets

$135.00 pair 1966-1967 'B' body outside door handles w/hardware and gaskets

$130.00 pair 1967 1/2-1971 Truck outside door handles w/hardware and gaskets

$10.00 set outside door handle gaskets, 1963-1966 'A', 1962-1965 'B', and 1967
1/2-1971 truck

$10.00 set outside door handle gaskets, 1966-1967 'B'

$2.00 each 1962-1965 door lock gaskets

$2.00 each 1962-up to ? trunk lock and 1966-up to? door lock gaskets

$2.00 each 1962-up to ? trunk lock and 1966-up to ? door lock retainer clip

$6./$5. pair 1962-1974 interior door lock button-chrome or black (can be
painted)

$6.00 pair Grommet for interior door lock buttons

$45.00 each 63-66 'A', 'B', and 'C' body inside door handles

$45.00 each 63-66 'A', 'B', and 'C' body window cranks (3 inch, 4 inch and 6 inch)

$1.00 each Internal wrenching hex screw for above door handles and window
cranks

$39/$75 ea/pair Ash tray 1964-1966 'A' and 'B' rear arm rest/1967-1969 'A' conv.
side panel

$60/$70 pair 1964-1966 'A' and 'C' / 1964-1965 'B' arm rest pad-Black/colors

$80/$85 pair 64-66 'A' and 'C'/ 1964-1965 'B' arm rest bases-chrome

$0.75 each 1962-1974 window regulator to channel retaining washer (4
internal prongs)

$150.00 each 1962-1965 'B' body radio antenna

$4.00 each 1962-1965 'B' body radio antenna gasket

$145.00 each 1964-1965 'B' body radio delete plates-Metal like original

$35.00 each 1962-1966 'A' and 'B' body steering column to shaft seal

$15.00 kit steering knuckle repair kit (seal in this kit is red)

$12.00 each steering knuckle seal only, black in color

$245.00 each 1965-1966 'B' Steering wheel - two spoke - black

$265.00 each 1965-1966 'B' Steering wheel - two spoke - red or tan

$75.00 each 1964 Plymouth "NOS" hood ornament, 6 cyl. and small block

$425.00 each 1964 Plymouth hood ornament big block

$60.00 pair 1964 Plymouth hood ornament decals-correct anodized alum.-383 and 426

$325.00 each 1964 Dodge trunk emblem

$20.00 each clutch fork boot

$40.00 each 1962-1965 'B', 1963-1971 'C' Firewall clutch rod boot (NOS)

$19.00 each 1962-1965 'B', 1963-1971 'C' Firewall clutch rod boot (reproduction)

$5.00 each 1963-up to? -- most bodies-clutch pedal upstop (rubber)

$50.00 each 1962-1965 clutch pedal return spring

$5.00 pair Nylon bushings for z-bar (two pair per z-bar)

$7.00 each Wire retainer clip for z-bar nylon bushings

$5.50 each rubber grease seal-ball to z-bar (two per z-bar)

$2.00 each Nylon wear washers-clutch linkage (three per car)

$3.00 each Spring clip-clutch linkage (three per car)

$85.00 each 1963-1965 'B' body shifter boot console and non-console

$85.00 each 1963-1965 'B' body chrome shifter boot bezel non console

$85.00 each 1963-1965 'B' body 4-speed under carpet seal

$160.00 each 1963-1965 'B' body 4-speed floor hump

$169.00 each 1963-1965 'B' body 4-speed crossmember

$26.00 pair Torson bar seals and retainer clips 'A', 'B', and 'E'

$49.00 each 1962-1965 Large boot (most V-8s)-ball and trunion driveshaft w/clamps

$140.00 pair 1964 Dodge - Teardrop Triad for top of front fender

$30.00 each 1965-1966 Coronet gold '500' numbers

$30.00 each 1963 'Fury' fender script

$40.00 each 1963-1966 'Sport Fury' script

$40.00 each 1963-1964 Savoy 'Plymouth' front fender script

$15.00 each 1962-1965 Most 'B' body glove box

$22.00 each 1963 Plymouth glove box

$40.00 pair 1964-1967 'B' body bench seat hinge covers (black or white only)

$119.00 pair 1964-1967 'B' body bench seat hinge covers (chrome)

$2.00 each Nut - front seat hold down

$15.00 pair 1962-1965 stops - 2 door seat back (plastic cup)

$320.00 pair 1963-1966 'A' and 1964-1965 'B' bodies - Convertable top latch mechanism

$70.00 pair 1963-1966 'A' and 1963-1965 'B' bodies-Convertable top guide pin
(stainless)

$12.00 pair 1962-1970 'A', 'B' and 'C' bodies convertable top pin socket
(plastic)

$30.00 set 1963-1971 'A','B', 'C', and 'E' Conv.door alignment wedges w/screws

$0.50 each convertable top boot snap studs w/screw

$4.00 set 1964-1965 'B' convertable sun visor screws (4 countersunk and 2 round
head)

$19.00 pair 1962-1965 Plastic sun visor tips

$100.00 pair 1962-1965 Sunvisors - several colors

$60.00 each 1962-1965 'B' body - accelerator pedal

$40.00 each 1962-1966 'A' and 1962-1965 'B' body clutch and brake pedal pads (manual
trans)

$18.00 each 1962-1966 'A' and 1962-1965 'B'" body brake pedal pad (auto trans)

$8.00 each 1963-1965 'A' and 'B' body emergency brake pedal pad

$60.00 set 1962-1965 'B' body big block engine mount brackets

$20.00 each Late 1962-1965 'B' body motor mounts

$150.00 pair Late 1962-1965 'B' Poly Lock motor mounts

$79.00 each 1963-1965 'B' Poly transmission mount (Specify Auto/Manual)

$79.00 each 1962-1965 'B' Poly trans adapter mount for use w/ late model
torquefite

$4.00 each 1962-1963 Plymouth and Dodge wedge shaped bumper-fender/hood (2/car)

$4.00 each 1964 Plymouth wedge shaped bumper - fender/hood (2/car)

$2.50 each 1965 Plymouth and Dodge wedge shaped bumper - fender/hood (4/car)

$2.00 each round rubber bumper - fender/hood at rear corners (2/car)

$1.50 each round rubber bumper - hood adjust, wo/stud

$3.00 each round rubber bumper - hood adust, w/stud

$2.00 each round rubber bumper - license plate mounting frame

$2.00 each 1962-1969 rubber door bumper (2/door) specify year

$2.00 each 1962-1967 'B' and 67-71 'A' trunk bumper

$0.50 each Glove box bumpers

$1.00 each Ash tray bumpers

$0.50 each 1965 and earlier license plate screw/nut combo

$1.50 each plastic snap in license plate nut

$1.50 each fast twist license plate screw-used with platic nut above

$90.00 each 1962-1965 'B' body windshield gasket (specify year , make, model)

$90.00 each 1962-1965 'B' body rear window gasket (specify year, make, model)

$250.00 pair 1962-1965 'B' body station wagon quarter window gasket w/lock
strip

$22.00 set 1962-1965 'B' body windshield reveal moulding clip/screw package

$26.00 set 1962 'B' body rear window reveal moulding clip/screw package

$15.00 set 1963 'B' body rear window reveal noulding screw package

$22.00 set 1964-1965 'B' body sedan rear window moulding clip/screw package

$22.00 set 1964-1965 'B' body hardtop rear window moulding clip/screw package

$0.10 each Wheel lip and some windshield moulding screws

Price varies by application --  Side and Rocker moulding clips for some of the 1962-1966 Mopars

$22.00 kit 64-65 Dodge 'B' Belt line moulding clips

$0.20 each 10-24 flange nut for moulding clips

$0.50 each folded sheetmetal acorn nut for ends of door side mouldings

$0.15 each stamped steel thread cutting nuts for moulding clips and script
(1/8, 5.32, 3/16)

$0.30 each tube nuts - for script w/1/8 stub and 3/16 hole in the body

$0.50 each 10-24 thread 'U' type foldover nut

$55.00 pair 63-66 'A' / 1962-1965 'B' body vent window frame to 'A' pillar seal

$160.00 pair 64-65 'B' vent window triangle seal - 2 door HT and Convertable

$10.00 set 1962-1965 'B' body vent window bottom trim gasket (1 set/car)

$19.00 pair 1962-1965 'B' body-Plastic tip for vent window handles

$90./$95. set 1962-1965 'B' body window felts (specify year, make, and model)

$45.00 set 1962-1965 'B' body station wagon tail gate window felt

$30.00 each 1962-1965 'B' body station wagon lower tail gate seal

$70.00 set 1962-1965 'B' body sedan-window channel run

$3.00 foot 1962-1965 'B' body vent window channel liner (7 foot sedan and 11 foot hardtop and
convertable)

$85.00 each 1962-1965 'B' body convertable header seal

$90.00 set 1962 'B' body convertable roof rail seals

$2.00 each Grommet - Convertable top pump mounting

$70.00 pair 1963-1965 'B' body-roof rail seals-2 and 4 door hardtop

Carpet by Trim Parts - (specify year, make, and model)

$55.00 pair 'U' shaped seal on 'B' pillar; 1962-1965 'B' body 2 door HT and
Convertable

$5.00 foot 1962-1965 Windlace - specify body style and color

$8.75 pair 1962-1965 Compact windlace-Used around quarter window on 2 door sedan

$10.00 each 1964-1965 Compact windlace-used on rear window - 2dr/4dr sdn and 4dr HT

$215.00 set 1962-1965 'B' body inner sill plates only

$290.00 set 1963-1965 'B' body inner and outer sill plates

$20.00 each 1963-1970 'B' body trunk seal

$32.00 each 1962 'B' body trunk seal

$30.00 pair 1963-1965 Plymouth/1962-1965 Dodge 'B' trunk well extension covers

$585.00 each 1962-1965 'B' Trunk floor pan

$210.00 Pair 1962-1965 'B' Trunk floor extensions

$95.00 each 1963-1965 'B' Moulded trunk mats

$585.00 each 1962-1965 'B' Complete one piece floor pan w/e-brake cable
brackets

$145.00 each  1962-1965 Plymouth, 1962 and 1965 Dodge 'B' rear foot pans -2 pcs- L and R ($285.
for both)

$145.00 each  1963-1964 Dodge 'B' rear foot pans-2 pcs-L and R ($285. for both)

$20.00 each  1962-1965 'B' Support bracket-Bottom of vent channel to
bottom of door 

$8.00 pair 1962 'B' body, seal-front edge of quarter glass for HT and Conv.
(not flocked)

$20.00 pair 1963-1970 'B' body, seal-front edge of quarter glass for HT and
Conv. (flocked)

$45/$75 pair 1964-1966 'B' body 727 transmission lines - original material /
Stainless steel

$65/$75 set 1962-1965 'B' body Engine compartment 3 brake line kit - OM or S/S

$29/$37 set 1962-1965 'B' body Rear Axle 2 brake line kit - OM or S/S

$5.00 each 1966-up to? plastic bushing for trans. shift linkage

$65.00 set 1964-1965 'B' body 3 piece brake line set (engine compartment)

$10.00 set Axle adjust lock pawl/flanged nut-for 8 3/4 right axle

$1.25 each Lug nut 1/2-20 x 3/4 Hex RH

$1.50 each Lug nut 1/2-20 x 3/4 Hex LH

$2.00 each Bumper bolts - 3/8 or 7/16

$38.00 pair 1963-1965 Plymouth and 1963 Dodge 'Teardrop' shaped bumper guard pad only

$195.00 pair 1963-1965 Plymouth rear bumper guards w/pads

$20.00 set Leaf spring shackle bushings (set of 8)

$6.50 pint 'Extreme Pressure' oil additive (replaces zinc removed from
modern oil

$245.00 each 1962-1965 'B' body Windshields – Clear or Tinted

(Prices subject to change) last revised 12-04-09

Tons of used parts for the 1962-1965 'B' bodies

**Coming Soon**

1963-1965 'B' body convertable roof rail seals

1964 Plymouth tail light lenses

1963-1965 'B' Front fender rear splash shields

1962-1965 'B' Covers-Inner fender 'A' frame adjust access hole

1962-1965 'B' Support bracket-Bottom of vent channel to bottom of door
 
				
Joe Suchy also has tons of used parts for the 1962 to 1965 B bodies!
Contact Joe Suchy in Fairburn, GA  dinahandjoe NOSPAM peoplepc.com (Replace the NOSPAM with @ to contact.)
or phone 770.964.4441. Tell Joe that Gary H. from the 1962 to 1965 Mopar Web site says hello!


318 Polyspherical (“Poly”) Engine Headers For Sale and a few new 1964 - 1976 A-body small block LA engine headers for sale at a real bargain of $359 a set, plus shipping. For more information and to order these headers contact Gary Pavlovich at his email: Contact to order Mopar 318 Polyspherical (Poly) Shorty Block Hugger Engine Headers  Put '62-'65 Mopar Headers in the subject line. (January 1, 2010)

318 Polyspherical (“Poly”) Engine Intake Manifolds and Carburetors 6 pack, 4 barrel, etc.

Poly engine 318 cast iron dual plane intake for sale. Excellent condition, primered and ready to paint. Includes spacer/adapter plate to run either the Holley, AFB, or AVS carbs. This intake made 360HP and 435ft. lbs. of torque on our 396 cubic inch Poly Stroker motor - all under 5000rpm, although with a different cam this intake will make power to 6000rpm easily. Contact Gary Pavlovich at his email: Contact to order Mopar 318 Poly 4 BBL intake

For Sale: New Mopar A Engine 318 Polyspherical (Poly) High Performance Camshaft packages or stock camshafts as well as custom cam grinding available and all related Poly internal engine parts; stock 9 to 1 pistons, forged pistons, rods/cranks, stainless valves...and also complete or partial Poly engine building: stock, High Performance 318, and 360/402 inch Stroker Poly engines. Please e-mail Gary Pavlovich with questions/orders: Contact



Weiand 7503 aluminum Poly 318 four barrel intake manifold (polished) for sale; and a cast iron Poly 318 four barrel intake (dual plane) for sale; both in excellent condition (obviously no corrosion quality intakes) and ready to bolt on. Please e-mail for pictures and price with shipping. Contact Gary Pavlovich at his email: Contact Polyspherical (Poly)

Two Mopar Poly 318 High Performance Camshafts for sale: 264/.450 inch (222@.050 inch) and a good street torque cam 256/.435 inch (208@.050 inch) $225 each, plus shipping cost via UPS or USPS.Contact Gary Pavlovich at his email: Contact Polyspherical (Poly)

Small Block Mopar 340 parts for sale: 340 X heads; freshly machined ready to bolt on; milled/unleaded seats/bronze guides, seals/2.02,1.60 inch valves/High lift springs to .500 inch/ported to flow 270cfm @ .500 inch lift with excellent low and mid numbers as well. $1250 plus shipping cost via UPS or USPS.
340 Camshaft for sale. NOS Sig Erson Hi-Ram2: 302 Adv. duration, 252 @/.050 inch .500 inch valve lift, 107LC. $150. plus shipping cost via UPS or USPS.
340 Edelbrock Finned Aluminum Valve Covers for sale, the rare ones with curved Edelbrock script, clearanced for all intakes excellent condition. $225. plus shipping cost via UPS or USPS.
New M-1 Single Plane 340 Mopar Intake Manifold for sale $200 plus shipping cost via UPS or USPS.
Please e-mail Gary Pavlovich for pictures and more information. Contact Polyspherical (Poly) (January 11, 2010)

Charlie 65Satelliteman’s 1962 to 1965 Mopar Restoration Services and Parts For Sale:
* Steering wheel restoration to high point scoring quality.
* Armrest sets completely restored for all of the 1962, 1963, 1964 and 1965
A, B and C body Mopars to like, or better than new, condition in some instances.
* High quality replacement grill emblems for the 1965 Belvedere I, 1965 Belvedere II,
1965 Plymouth Satellite, 1965 Plymouth Fury I-II-III and 1965 Sport Fury.
(Usually all of the five models of grill emblems made go on Ebay with a
starting bid price of $130.00 including free priority mail shipping in the continental USA.
International shipping is available.)

Coming soon: the 1965 Dodge Coronet 440 and 500 rear trunk emblem inserts and the 1962 Plymouth Savoy, Belvedere, Fury and Sport Fury hood and trunk emblem inserts. Please call on these as they are close to being ready for production and availability to members in the restoration hobby.
Charlie has thousands of nice rare parts for early B-bodies that he will be selling off due age and health issues. Most of the parts are for the 1965 Plymouth Belvedere and Satellite models, but there are still quite a few out in the warehouse for the other B-bodies as well.
Phone Charlie (65Satelliteman) week nights, only between 6pm to 9pm eastern time, with any questions or parts inquiries at 989-362-8463 or email mitzi265 NOSPAM hotmail.com (Replace the NOSPAM with @ to email Charlie. January 1, 2010)


Dodge and Plymouth rear tailgate station wagon glass for sale. Came out of 1963 or 1964 Mopar Dodge and Plymouth 'B' body station wagon. Decent driver quality. In Houston, Texas. $30 (plus shipping) (January 1, 2010) contact Gary.

For Sale New Weiand Team G 440 Intake Manifold clean and still in original box. $125. Plus Shipping. Contact Jay at 860.995.6366 or krodskie NOSPAM yahoo.com (Replace the NOSPAM with @ to email Jay. January 11, 2010)

For sale: 1963 426 .030 Max Wedge block T MP HC in Douglas, Ga. $2200.00 478.279.2307 or skafouse NOSPAM yahoo.com (Replace the NOSPAM with @ to contact. January 22, 2010)


Specific Years Parts For Sale

1962 Parts For Sale



1962 Plymouth or 1962 Dodge B Body 4 door rocker panel patches for sale; 2 panels, one for each side of car. New metal. Some surface rust from sitting around in storage all these years, should be easy to remove. $45 for BOTH. Plus shipping. Gary H. contact Gary January 1, 2010

1962 Plymouth Fury deck lid for sale. Straight, but needs some rust repair. Pictures available. $30 (plus shipping) contact Gary January 1, 2010

For Sale: an aluminum slant six motor that we took out of a 1962 Valiant. Motor is stuck and is pretty much complete the way it came out with alternater missing. I do have some pictures I can email you. I'm asking a $1000.00 -- we are located in Spencer Iowa, which is 100 miles east of Sioux Falls S.D. or 100 miles west of Mason City Iowa. We can put on a pellet and truck ship. You can call 712-260-8745 and ask for Steve or email Hurstmopar NOSPAM mchsi.com (Replace the NOSPAM with @ to contact. January 17, 2010)

1962 Dodge Polara 500 specific parts for sale. All the key trim parts available. Perfect set up for some one restoring a car and needs everything. Convertible parts available too. Also refinished 14 x 6 early wheels (4) , 10 button style. In Washington state. email XNRSXIT NOSPAM yahoo.com (Replace the NOSPAM with @ to contact. May 7, 2010)

NOTE: ALL 2009 ads were archived on January 1, 2010. Resubmit your old ad if you want it relisted.
Newest ads are at the bottom of each category!

1963 Parts For Sale



1963 426 Mopar street wedge block and crank for sale. Been to the machine shop and ready to install. Numbers on the block #2406730-1, numbers on the pad in front of motor are 426 Mar, 10-8-63. Also have the original intake for this motor. Motor is in Apple Valley, CA. Contact Harry at 760-242-7361 or Moweepea NOSPAM verizon.net (Replace the NOSPAM with @ to contact. January 1, 2010)

1963 Dodge Aluminum Front End for sale. 2 good fenders, hood w/fresh skin, real nice hood scoop, bumper brackets and a very rare factory made light weight steel bumper. $16,000. This front end came from The Famous Dan Dvorak back in 2001. These parts are located in Columbus, Ohio. These parts will be at The 2nd Annual Sled City Championship Events All Mopar Swap Meet in Columbus, Ohio January 15 and 16 2010. If you can not afford the aluminum parts, I can do it in fiberglass for a lot less. Contact Larry at 1-614-875-0369 or Sled City Events.com or by email sledcityNOSPAMaol.com (Replace the NOSPAM with @ to contact. January 1, 2010)
NOTE: ALL 2009 ads were archived on January 1, 2010. Resubmit your old ad if you want it relisted.
Newest ads are at the bottom of each category!

1964 Parts For Sale

NOTE: ALL 2009 ads were archived on January 1, 2010. Resubmit your old ad if you want it relisted.
Newest ads are at the bottom of each category!


1964 Dodge Dart grill for sale $125. In Houston, Texas. Price does not include actual shipping charge. Gary H. contact Gary (January 1, 2010)

1964 Plymouth doors for sale. With glass. Came off a 1964 Plymouth 4 door Belvedere. Doors are complete with glass but no door panels. Parts are in Houston, Texas. $5 takes them all! (plus shipping) contact Gary.

Driver side front fender stainless trim from 1964 Plymouth Belvedere for sale. 4 door Belvedere. In Houston, Texas. $25 (plus shipping) contact Gary. (January 1, 2010)

Front fender Plymouth Belvedere> emblem
Front fender Belvedere emblem for sale. From 1964 Plymouth Belvedere. Belvedere script is in good shape with all the pins intact. There is a tiny bit of deterioration at the top of the 'd' and 'r' toward the back side but it is not really noticeable unless you really look closely for it; there are tiny 'age spots' that kinda show up in the picture of the front; but they are not visible from a distance. I'd say it is above average driver quality. In Houston, Texas. $25 (plus shipping) contact Gary. (January 1, 2010)

1964 Chrysler parts for sale: instrument cluster, tail lights, parking lights, remote passenger door dual post mirror, spare tire hold down, and a few other pieces. Make offers. In Houston, Texas. contact Gary. (January 1, 2010)

1964 Plymouth Belvedere steering wheel for sale; wheel has typical cracks and sun shrinkage and needs restoration; was $60, now SALE $30 (need to clear out the barn -- also have the 1964 Plymouth Belvedere horn ring for sale $20. Parts plus shipping. In Houston, Texas. contact Gary. (January 1, 2010)

1964 Dodge B Body bumpers for sale. 2 front, 3 rears. One front with guards. One rear with holes for guards. Rear guards may be available later. All bumpers newly chromed. Done at shop with 50+ yrs experience. Very good quality and condition. If interested, call 515-480-3891, or e-mail me at bickelmotors NOSPAM hotmail.com Located in Des Moines, Iowa. Usually ship for around 50 bucks. Thanks. (Replace NOSPAM with @ to contact. January 1, 2010)

1965 Parts For Sale

NOTE: ALL 2009 ads were archived on January 1, 2010. Resubmit your old ad if you want it relisted.
Newest ads are at the bottom of each category!


1965 Plymouth horn ring for sale. Driver quality. In Houston, Texas. $25 (plus shipping) contact Gary. (January 1, 2010)

1965 Chrysler Parts for sale: front and rear bumpers, grille, front lower valance, cowl cover, dash. Came off a Newport but should fit other 1965 Chryslers. Parts are in Houston, Texas. Make an offer, all or by piece. contact Gary. (January 1, 2010)

1965 Dodge and Plymouth B Body reproduction lenses for sale. $210 dollars shipped to the lower 48 states includes full set of lenses: 2 backup, 2 parking and 2 tail lights. Also available individually. See more details and contact information at 1965-lenses-hsia.html (January 1, 2010)

1965 Plymouth B body rear bumper for sale. New chrome: $325. Done by reputable shop with 50+ yrs experience. Call Tom at 515-480-3891 for more details. -- bickelmotors AT hotmail.com (Replace the NOSPAM with @ to contact. January 1, 2010)

1965 Dodge Coronet 500 parts for sale: black bucket seats, door panels, A.T. console and shifter, doors, rear window glass, visors, body chrome trim, etc. Tell me what you are looking for, I may have it. Photos and prices on request. Warren, in Northwest Michigan. vulcan NOSPAM kaltelnet.net (Replace the NOSPAM with @ to contact. January 1, 2010)

For Sale 1965 2 door Plymouth Sport Fury Rechromed Dash Bezels and New Door Panels (Black), located in San Diego, Ca. Contact Shawn (619)768-3377 or s_j_blalock NOSPAM sbcglobal.net (Replace the NOSPAM with @ to contact. January 28, 2010)

Two automatic console shifters for a 1965 Plymouth Satellite. Make an offer. 408-234-9786, ask for Steve. Or mopar6pk NOSPAM prodigy.net In an Jose, CA (Replace the NOSPAM with @ to contact. February 20, 2010)

1965 Dodge Coronet 440 convertible driver side door; 2 trunk lids for 1965 Dodge Coronets; one grille support from a 1965 Dodge Coronet. Free, Nada, Zilch! Just come and pick them up. Located 80 miles west of Washington DC, right off I-81 Don. mopar4me NOSPAM shentel .net (Replace the NOSPAM with @ to contact. May 7, 2010)


Did we help your restoration? Support the 1962 to 1965 Web site with a donation.



Wanted

1962 to 1965 Vehicles Wanted



Car Wanted: 1964 Plymouth Sport Fury, 2-door hard-top, red interior and red exterior, automatic transmission. Prefer a numbers matching, mostly original car, either restored or in restorable condition. Contact Doug at pluckedchickens NOSPAM hotmail.com (Replace the NOSPAM with @ to contact. January 1, 2010)

Wanted: 1962 Dodge Dart / 330 model prefer 2 door (hardtop or post car) but, would consider a clean 4 door. Roller/non-running is fine. Have a 1962 Plymouth Fury 4 door to trade if interested? Please contact Rob: classicpenn NOSPAM aol.com (Replace the NOSPAM with @ to contact. January 11, 2010)

Vehicle wanted: 1963-1966 Plymouth Valiant Signet or Dart GT in driveable, safe mechanical condition with a solid, straight body in the Phoenix, AZ area. Call Kurt at (623)399-6193. (February 23, 2010)

Wanted: 1965 Dodge Coronet Station wagon, 6 or 9 passenger, With title; Any engine / trans combination, Daily driver; Want to build a tow car. Phone 702-236-2473 or E-mail with pictures to: dodland NOSPAM clear.net (Replace the NOSPAM with @ to contact. May 7, 2010)
NOTE: ALL 2009 ads were archived on January 1, 2010. Resubmit your old ad if you want it relisted.

Newest ads are at the bottom of each category!


Did we help your restoration? Support the 1962 to 1965 Web site with a donation.


Parts Wanted

Multiple Years Parts Wanted (must apply to 1962 to 1965 Mopars in some way)



Wanted: Mopar used matched set Ring and Pinion. Needs to be in good condition with no rust. For 8 3/4 inch in a 742 carrier -- 3:55 ratio. Scammers, do not bother. Others please contact Steve Mick at 712-523-2272--micher NOSPAM frontiernet.net. (Replace the NOSPAM with @ to contact. January 1, 2010)



NOTE: ALL 2009 ads were archived on January 1, 2010. Resubmit your old ad if you want it relisted.
Newest ads are at the bottom of each category!

1962 Parts Wanted


Wanted: the driver’'s side fender for 1962 Dodge Dart, in the Detroit Mich. area, or I can pick up at the swap meet in Indy. etkea NO SPAM msn.com (Replace the NOSPAM with @ to contact. February 20, 2010)

NOTE: ALL 2009 ads were archived on January 1, 2010. Resubmit your old ad if you want it relisted.

Newest ads are at the bottom of each category!

1963 Parts Wanted

NOTE: ALL 2009 ads were archived on January 1, 2010. Resubmit your old ad if you want it relisted.

Newest ads are at the bottom of each category!

1964 Parts Wanted

NOTE: ALL 2009 ads were archived on January 1, 2010. Resubmit your old ad if you want it relisted.

Wanted: A pair of doors for a 1964 Dodge 440 two door. drmmhmd NOSPAM yahoo.com (Replace the NOSPAM with @ to contact.) January 1, 2010)

PART WANTED: 1964 early Plymouth / Dodge Courtesy Light Lens. These lenses are mounted on the 'C' pillar of all 2-door hardtops built in early 1964. They are ALL plastic, one piece construction, with vacuum plated 'chrome' outer bezels and a concave aluminum disc sunk into the center of the lens. These cannot be re-chromed so I am looking for NOS or excellent used lenses. Contact Doug at pluckedchickens NOSPAM hotmail.com (Replace the NOSPAM with @ to contact. January 1, 2010)
Newest ads are at the bottom of each category!

1965 Parts Wanted

NOTE: ALL 2009 ads were archived on January 1, 2010. Resubmit your old ad if you want it relisted.

Wanted: the right front and rear fender molding for a 1965 Dodge Custom 880 2 door hardtop. Passenger side. I am from France. renewal1 NOSPAM hotmail.fr (Replace the NOSPAM with @ to contact. January 1, 2010)

Wanted: I am looking for some good driver quality (no pits) emblems for my 1965 Dodge Coronet 2 door post: I need the front fender medallions, the Coronet emblems and the DODGE letters for the trunk lid. Phillip 360-739-8691 (January 1, 2010)

Parts Wanted for 1965 Plymouth Satellite: the trim piece that runs between the tail lights, below the deck lid. It is 2 pieces, jointed together in the middle of the license plate frame. I need the right side, (passenger side). Satellite and Belvedere are the same piece. (Satellite trim has the engine turn inlay and an emblem. Got them.) Thanks, Ollie. satellite1965 NOSPAM comcast.net (Replace the NOSPAM with @ to contact. January 1, 2010)

Wanted: Looking for a complete trunk lock for a 1965 Plymouth Fury. I know this is a one year only item.Contact Bob 928-692-7689 or 74gtx NOSPAM citlink.net (Replace the NOSPAM with @ to contact) February 9, 2010)

Wanted: 1965 Dodge Coronet 2 door SEDAN doors. Mine were gutted by the previous owner. Need help finding some. Dave in Orangeville, near Toronto Canada. rpm.ltd NOSPAM sympatico.ca (Replace the NOSPAM with @ to contact. May 4, 2010)

Newest ads are at the bottom of each category!


Miscellaneous 1962 to 1965 Mopar Related Stuff Wanted

NOTE: ALL 2009 ads were archived on January 1, 2010. Resubmit your old ad if you want it relisted.
How to Post an Ad.     Newest ads are at the bottom of each category!     How to Post an Ad.


This version of the 2010 Swap Meet was uploaded on March 14, 2010


18,584 folks virtually walked through the original 1962 - 1965 Mopar Web Site Swap Meet from November 22, 1997 through August 18, 1999. The counter later reset from 33080 to 0, then the counter host company went to belly up, dot bomb status. Oh well, anyway, LOTS of people have virtually browsed the 1962 to 1965 Mopar swap meet tables since put on the Web on August 18, 1999.

Want the opportunity to communicate with those who share your 1962 to 1965 Mopar preferences?
Check out the 1962 - 1962 Mopar Mail List Clubhouse for more details.




NOTE: These listings are placed here as is and as received. BE CAREFUL! Do your best to confirm the person actually has the item to sell before any money changes hands! Do not buy if you are not positive! Remember C.O.D. is an option, too. In any case, in the U.S.A. use a postal money order to pay for the item, and send payment by U.S. Mail. While we assume no liability for these listings, we want to help people maintain and restore 1962 to 1965 Mopars. Buyer beware is a good motto to remember in any Web transaction!


Please contact the advertiser to verify the accuracy of the information contained in these ads. The advertisers and the 1962 to 1965 Mopar Web Site expressly disclaim any and all liability for typographical errors, mistakes or misprints.

Go back to the 1962 to 1965 Mopar Web Site Home Page.