based on early '60's Mopar Logo

1964 Dodge 330 Wagon

Works in Progress

1964 Dodge 330 Wagon

Mark writes: Here's a couple shots of my newly acquired 1964 330 wagon.

It looks better in the pictures than it actually is.

1964 Dodge 330 Wagon 383 2 4's

It has a 383 with a factory dual quad intake, with twin carter 500's. The 383 needs to be rebuilt but runs ok. The 383 is hooked to an a-body(!) 4 speed and uses a reeeal long driveshaft to make up for the short tailshaft. It has 3:91's in the 8 3/4 rear.

Future plans include reinstalling the heater box (before winter) and putting in a 431 stroker motor and tearing out the fiberglass and sheetmetal rear floor and replacing it with daimond plate to facilitate its future use as a swap meet hauler.

UPDATE April 2013: It turned out that this Dodge was too far gone to save. We pulled the 383 dual quad motor and 4-speed setup along with the nice front clip and scrapped the rest.

Visit Mark's Other Wagon Projects! -- 1964 Plymouth Fury wagon -- 1962 Plymouth wagon

Thanks, Mark!

That 431 stroker wagon will certainly deliver the parts to the swap meets in record time! Hopefully, you will be able to get that smile off your face so you can do some serious swap meet bartering when you arrive at the swap meet event! :-)

REL: updateZ: Yes, sometimes you just save what is good and go from there. Gary H.

Page created November 3, 1999; Revised September 21, 2000; April 8, 2001; April 23, 2012
Go back to the Works in Progress Web Page.
Go back to the 1962 to 1965 Mopar Web Site Home Page.